2025

• Feyer F., Weigand M., Randelzhofer P., Körner C.:
  Increasing the conductivity of aluminium high-pressure die casting alloy AlSi9Cu3Fe (226D) by Sr modification of eutectic and intermetallic phases
  In: Materials Science and Engineering B-Advanced Functional Solid-State Materials 316 (2025), Article No.: 118109
  ISSN: 0921-5107
  DOI: 10.1016/j.mseb.2025.118109

2024

• Feyer F., Randelzhofer P., Körner C.:
  Influence of Mould Filling and Microstructure on Conductivity in Aluminium High Pressure Die Casting Parts
  COMAT 2024 (Pilsen, 10. September 2024 - 12. October 2024)
• Titz K., Vollhüter J., Randelzhofer P., Neumeier S., Göken M., Wahlmann B., Körner C.:
  Design and Characterization of a Novel NiAl–(Cr,Mo) Eutectic Alloy
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302079

2023

• Kirchmayer A., Weiser M., Randelzhofer P., Freund L., Gehrmann B., Haghighat MH., Huenert D., Göken M., Neumeier S.:
  Oxidation Behavior of the Polycrystalline Ni-Base Superalloy VDM® Alloy 780
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06956-z

2022

• Himmler D., Randelzhofer P., Körner C.:
  In-situ Al3Ti particle reinforcement for stiff aluminum die castings
  In: Journal of Alloys and Compounds (2022), Article No.: 163984
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2022.163984

2021

• Trudonoshyn O., Randelzhofer P., Körner C.:
  Heat treatment of high-pressure die casting Al-Mg-Si-Mn-Zn alloys
  In: Journal of Alloys and Compounds (2021)
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2021.159692

2020

• Himmler D., Randelzhofer P., Körner C.:
  Formation kinetics and phase stability of in-situ Al3Ti particles in aluminium casting alloys with varying Si content
  In: Results in Materials (2020)
  ISSN: 2590-048X
  DOI: 10.1016/j.rinma.2020.100103
• Prach O., Trudonoshyn O., Randelzhofer P., Körner C., Durst K.:
  Multi-alloying effect of Sc, Zr, Cr on the Al-Mg-Si-Mn high-pressure die casting alloys
  In: Materials Characterization 168 (2020)
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2020.110537
• Trudonoshyn O., Prach O., Randelzhofer P., Durst K., Körner C.:
  Heat treatment of the new high-strength high-ductility Al–Mg–Si–Mn alloys with Sc, Zr and Cr additions
  In: Materialia 15 (2020), Article No.: 100981
  ISSN: 2589-1529
  DOI: 10.1016/j.mtla.2020.100981
• Zeng Y., Himmler D., Randelzhofer P., Körner C.:
  Processing of in situ Al3Ti/Al composites by advanced high shear technology: influence of mixing speed
  In: International Journal of Advanced Manufacturing Technology 110 (2020), p. 1589-1599
  ISSN: 0268-3768
  DOI: 10.1007/s00170-020-05956-w

2019

• Prach O., Trudonoshyn O., Randelzhofer P., Körner C., Durst K.:
  Effect of Zr, Cr and Sc on the Al–Mg–Si–Mn high-pressure die casting alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing (2019)
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2019.05.038
• Randelzhofer P.:
  Bohrhaken-Material-Korrosion
  In: bergundsteigen 107 (2019)
  ISSN: 2073-0136
• Trudonoshyn O., Rehm S., Randelzhofer P., Körner C.:
  Improvement of the high-pressure die casting alloy Al-5.7Mg-2.6Si-0.7Mn with Zn addition
  In: Materials Characterization 158 (2019)
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2019.109959
• Zeng Y., Himmler D., Randelzhofer P., Körner C.:
  In situ Al3Ti/Al composites fabricated by high shear technology: microstructure and mechanical properties
  In: Materials Science and Technology 35 (2019), p. 2294-2303
  ISSN: 0267-0836
  DOI: 10.1080/02670836.2019.1677025

2018

• Zeng Y., Himmler D., Randelzhofer P., Körner C.:
  Microstructures and Mechanical Properties of Al3Ti/Al Composites Produced In Situ by High Shearing Technology
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800259

2017

• Hilbinger RM., Gerth S., Randelzhofer P.:
  Creation and characterization of specimen with pores for fatigue tests and castings process simulation
  In: Materialwissenschaft und Werkstofftechnik 48 (2017), p. 77-87
  ISSN: 1521-4052
  DOI: 10.1002/mawe.201600706

2016

• Huenert D., Pröbstle M., Casanova A., Schlütter R., Krakow R., Büscher M., Randelzhofer P., Evans A., Löhnert K., Witulski T., Neumeier S., Rae CMF.:
  ATI718PLUS® - New nickel based disc alloy and its capability
  13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs, 11. September 2016 - 15. September 2016)
  In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (ed.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016
  DOI: 10.1002/9781119075646.ch84

2011

• Schaef W., Marx M., Vehoff H., Heckl A., Randelzhofer P.:
  A 3-D view on the mechanisms of short fatigue cracks interacting with grain boundaries
  In: Acta Materialia 59 (2011), p. 1849-1861
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2010.11.051

2009

• Kramer M., Jenning R., Lohmüller A., Hilbinger RM., Randelzhofer P., Singer R.:
  Characterization of magnesium alloys for semi solid processing
  8th International Conference of Magnesium Alloys and their Applications (Weimar, 26. October 2009 - 29. October 2009)
  In: K. U. Kainer (ed.): Magnesium: 8th International Conference on Magnesium Alloys and their Applications, Wiley-VCH: 2009

1999

• Blackford J., Randelzhofer P., Singer R.:
  Crack formation during solidification
  Erstarrung metallischer Schmelzen in Forschung und Gießereipraxis (Aachen, 16. March 1999 - 17. March 1999)
  In: Andreas Ludwig (ed.): Erstarrung metallischer Schmelzen in Forschung und Gießereipraxis, Weinheim: 1999