Publications
Expand All
2024
Bezold A. , Vollhüter J. , Karpstein N. , Lenz M. , Subramanyam AP. , Zenk C. , Hammerschmidt T. , Spiecker E. , Göken M. , Neumeier S. :Segregation-induced strength anomalies in complex single-crystalline superalloys Communications Materials 5 2024 ), Article No.: 8 ISSN: 2662-4443 10.1038/s43246-024-00447-x Böhm J. , Breuning C. , Markl M. , Körner C. :A new approach of preheating and powder sintering in electron beam powder bed fusion International Journal of Advanced Manufacturing Technology 2024 )ISSN: 0268-3768 10.1007/s00170-024-13966-1 Chen Y. , Fu Z. , Ye J. , Wahlmann B. , Körner C. :Additive Manufacturing of TiC/Steel Composites Using Electron Beam Melting and In Situ Infiltration Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202301313 Gaag T. , Heidowitzsch M. , Galgon F. , Körner C. , Zenk C. :A Novel Approach for Rapid Material Library Generation Using Laser-Remelting Advanced Engineering Materials 26 2024 ), Article No.: 2301316 ISSN: 1438-1656 10.1002/adem.202301316 Gaag T. , Weidinger J. , Bandorf J. , Lux V. , Wahlmann B. , Neumeier S. , Zenk C. , Körner C. :Experimental Validation of Property Models and Databases for Computational Superalloy Design Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202401051 Jumah R. , Alsalman S. , Jum'h I. , Al-Addous M. , Hrahsheh F. , Ghanem H. , Rosiwal S. , Telfah A. :Chemical structure dependent electrochemical degradation of antibiotics using Boron-doped Diamond Electrodes Journal of Environmental Chemical Engineering 12 2024 ), Article No.: 114115 ISSN: 2213-3437 10.1016/j.jece.2024.114115 Knörlein J. :Elektronenstrahlbasierte additive Fertigung von Titanaluminid-Bauteilen mit dualer Mikrostruktur 2024 )Koepf JA. , Pistor J. , Markl M. , Körner C. :Numerical Microstructure Prediction for Lattice Structures Manufactured by Electron Beam Powder Bed Fusion Crystals 14 2024 ), Article No.: 149 ISSN: 2073-4352 10.3390/cryst14020149 Kupfer T. , Breuning C. , Markl M. :Graph-based spot melting sequence for electron beam powder bed fusion Additive Manufacturing 91 2024 ), Article No.: 104321 ISSN: 2214-7810 10.1016/j.addma.2024.104321 Markl M. , Azadi Tinat MR. , Berger T. , Renner J. , Körner C. :Extracting powder bed features via electron optical images during electron beam powder bed fusion Additive Manufacturing Letters 10 2024 ), Article No.: 100220 ISSN: 2772-3690 10.1016/j.addlet.2024.100220 Markl M. , Colosimo BM. , Körner C. :Progress in electron beam additive manufacturing Progress in Additive Manufacturing 2024 )ISSN: 2363-9512 10.1007/s40964-024-00679-w Mavrikis S. , Nieuwoudt M. , Göltz M. , Ehles S. , Körner A. , Hutzler A. , Fossy E. , Zervas A. , Brai O. , Wegener M. , Doerrfuss F. , Bouwman P. , Rosiwal S. , Wang L. , Ponce de León C. :Continuous Production of Ethylene and Hydrogen Peroxide from Paired Electrochemical Carbon Dioxide Reduction and Water Oxidation Advanced Energy Materials 2024 )ISSN: 1614-6832 10.1002/aenm.202304247 Renner J. , Markl M. , Körner C. :In situ build surface topography determination in electron beam powder bed fusion Progress in Additive Manufacturing 2024 )ISSN: 2363-9512 10.1007/s40964-024-00621-0 Scherr R. , Liepold P. , Markl M. , Körner C. :A CALPHAD-Informed Enthalpy Method for Multicomponent Alloy Systems with Phase Transitions Modelling 5 2024 ), p. 367-391 ISSN: 2673-3951 10.3390/modelling5010020 Schulze H. , Zenk C. , Körner C. :Improving Microstructural Homogeneity of Investment-Cast Single-Crystalline Ni-Base Superalloys by Using Fluidized Carbon Bed Cooling Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202302123 Sánchez Batalla B. , Laube A. , Struckmann T. , Hofer A. , Zallmann S. , Körner C. , Fischer S. , Burek BO. , Bachmann J. , Weidlich C. :A Mild Method for the Activation of Cation Exchange Membranes Used in Tubular PEM Electrolyzers ChemPlusChem 89 2024 ), Article No.: e202300735 ISSN: 2192-6506 10.1002/cplu.202300735 Titz K. , Vollhüter J. , Randelzhofer P. , Neumeier S. , Göken M. , Wahlmann B. , Körner C. :Design and Characterization of a Novel NiAl–(Cr,Mo) Eutectic Alloy Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202302079 Wahlmann B. :Numerische Entwicklung von Superlegierungen für den Guss und die Additive Fertigung 2024 )Wahlmann B. , Markl M. , Körner C. :A thermo-mechanical model for hot cracking susceptibility in electron beam powder bed fusion of Ni-base superalloys Materials & Design 237 2024 ), Article No.: 112528 ISSN: 0264-1275 10.1016/j.matdes.2023.112528 Yang J. :Electron beam-based additive manufacturing of Fe-Si soft magnetic materials 2024 )Yang Z. :Modeling and Simulation of Bulk Metallic Glass Crystallization During Laser Powder Bed Fusion 2024 )10.25593/open-fau-715 Yang Z. , Koepf JA. , Markl M. , Körner C. :Effect of scanning strategies on grain structure and texture of additively manufactured lattice struts: A numerical exploration Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202400661 Yang Z. , Markl M. , Körner C. :Comprehensive numerical investigation of laser powder bed fusion process conditions for bulk metallic glasses Additive Manufacturing 81 2024 ), Article No.: 104026 ISSN: 2214-7810 10.1016/j.addma.2024.104026 Ye J. , Semjatov N. , Bidola P. , Lindwall G. , Körner C. :Revealing the Mechanisms of Smoke during Electron Beam–Powder Bed Fusion by High-Speed Synchrotron Radiography Journal of Manufacturing and Materials Processing 8 2024 ), Article No.: 103 ISSN: 2504-4494 10.3390/jmmp8030103 Zallmann S. , Fu Z. , Körner C. :Powder sintering kinetics during electron beam based additive manufacturing Powder Technology 434 2024 ), Article No.: 119332 ISSN: 0032-5910 10.1016/j.powtec.2023.119332
2023
Akhlaghi M. , Körner C. :Comparison between nitriding behavior of Mo-Ti and Mo-V alloys International Journal of Refractory Metals & Hard Materials 112 2023 ), Article No.: 106126 ISSN: 0263-4368 10.1016/j.ijrmhm.2023.106126 Arnold C. :Fundamental Investigation of Electron-Optical Process Monitoring in Electron Beam Powder Bed Fusion 2023 )https://nbn-resolving.org/urn:nbn:de:bvb:29-opus4-216113 Baumgärtner B. , Rothfelder R. , Greiner S. , Breuning C. , Renner J. , Schmidt M. , Drummer D. , Körner C. , Markl M. , Hausotte T. :Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography Journal of Manufacturing and Materials Processing 2023 )ISSN: 2504-4494 10.3390/jmmp7030095 Bidola PM. , Abreu-Faria G. , Klingenberg J. , Brehling J. , Burmester H. , Tietze U. , Krywka C. , Staron P. , Schwebke B. , Lottermoser L. , Lindwall G. , Ioannidou C. , König HH. , Spartacus G. , Semjatov N. , Beckmann F. :A high-speed X-ray Radiography Setup for in-situ Electron Beam Powder Bed Fusion at PETRA III Advances in X-Ray/EUV Optics and Components XVIII 2023 (San Diego, CA, USA 22. August 2023 )In: Hidekazu Mimura, Ali M. Khounsary, Christian Morawe (ed.): Proceedings of SPIE - The International Society for Optical Engineering 2023 10.1117/12.2678913 Breuning C. , Böhm J. , Markl M. , Körner C. :High-Throughput Numerical Investigation of Process Parameter-Melt Pool Relationships in Electron Beam Powder Bed Fusion Modelling 4 2023 ), p. 336-350 ISSN: 2673-3951 10.3390/modelling4030019 Breuning C. , Markl M. , Körner C. :A return time compensation scheme for complex geometries in electron beam powder bed fusion Additive Manufacturing 76 2023 ), p. 103767 ISSN: 2214-7810 10.1016/j.addma.2023.103767 Feng L. , Shi R. , Zenk C. , Mills MJ. , Wang Y. :Phase field modeling of shearing processes of a dual-lobed γ″|γ′|γ″ coprecipitate Acta Materialia 246 2023 ), Article No.: 118693 ISSN: 1359-6454 10.1016/j.actamat.2023.118693 Fink A. , Fu Z. , Körner C. :Functional properties and shape memory effect of Nitinol manufactured via electron beam powder bed fusion Materialia 30 2023 ), Article No.: 101823 ISSN: 2589-1529 10.1016/j.mtla.2023.101823 Franke M. , Arnold C. , Körner C. :In-situ quality assurance for electron-based additive manufacturing by electron optical observation Progress in Additive Manufacturing 8 2023 ), p. 55-60 ISSN: 2363-9512 10.1007/s40964-022-00382-8 Förner A. , Vollhüter J. , Krapf A. , Jamjoom AFA. , Hausmann D. , Wahlmann B. , Fu Z. , Körner C. , Neumeier S. , Göken M. :Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites Advanced Engineering Materials 2023 )ISSN: 1438-1656 10.1002/adem.202300407 Göltz M. , Helmreich T. , Börner R. , Kupfer T. , Schubert A. , Rosiwal S. :Spatial distribution of thermally induced residual stresses in HF-CVD diamond coatings on microstructured steel surfaces Diamond and Related Materials 136 2023 ), Article No.: 109931 ISSN: 0925-9635 10.1016/j.diamond.2023.109931 Hagen S. , Haußmann L. , Wahlmann B. , Gebhardt F. , Abu-Khousa B. , Weiser M. , Neumeier S. , Zenk C. , Virtanen S. :Influence of the W and Ta content on the High-Temperature Oxidation Resistance of Multinary Co/Ni-Based Superalloys at 1050 °C and 1150 °C High Temperature Corrosion of Materials 2023 )ISSN: 2731-8397 10.1007/s11085-023-10183-1 Himmler D. :Steifigkeitserhöhung von Aluminium-Druckgusslegierungen durch in-situ gebildete Al3Ti-Partikel - Prozesstechnologie und Charakterisierung 2023 )Kirchmayer A. , Weiser M. , Randelzhofer P. , Freund L. , Gehrmann B. , Haghighat MH. , Huenert D. , Göken M. , Neumeier S. :Oxidation Behavior of the Polycrystalline Ni-Base Superalloy VDM® Alloy 780 Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2023 )ISSN: 1073-5623 10.1007/s11661-022-06956-z Koepf JA. , Gotterbarm M. , Kumara C. , Markl M. , Körner C. :Alternative Approach to Modeling of Nucleation and Remelting in Powder Bed Fusion Additive Manufacturing Advanced Engineering Materials 2023 )ISSN: 1438-1656 10.1002/adem.202201682 Köbrich M. , Förner A. , Volz N. , Zenk C. , Fries SG. , Göken M. , Neumeier S. :Influence of refractory and platinum group metals on the microstructure and thermo-physical properties of Co-Al-W-based superalloys Journal of Alloys and Compounds 947 2023 ), Article No.: 169542 ISSN: 0925-8388 10.1016/j.jallcom.2023.169542 König HH. , Semjatov N. , Spartacus G. , Bidola P. , Ioannidou C. , Ye J. , Renner J. , Lienert U. , Abreu-Faria G. , Wahlmann B. , Wildheim M. , Ackelid U. , Beckmann F. , Staron P. , Hedström P. , Körner C. , Lindwall G. :MiniMelt: An instrument for real-time tracking of electron beam additive manufacturing using synchrotron x-ray techniques Review of Scientific Instruments 94 2023 )ISSN: 0034-6748 10.1063/5.0177255 Laube A. , Sánchez Batalla B. , Weidlich C. , Hofer A. , Bachmann J. , Zallmann S. , Körner C. , Fischer S. , Chica A. , Struckmann T. :Tubular PEM electrolysis cells with a 3D-printed oxygen electrode and ALD catalyst coating International Journal of Hydrogen Energy 49 2023 ), p. 437-448 ISSN: 0360-3199 10.1016/j.ijhydene.2023.08.084 Mergheim J. , Breuning C. , Burkhardt C. , Hübner D. , Köpf J. , Herrnböck L. , Yang Z. , Körner C. , Markl M. , Steinmann P. , Stingl M. :Additive manufacturing of cellular structures: Multiscale simulation and optimization Journal of Manufacturing Processes 95 2023 ), p. 275-290 ISSN: 1526-6125 10.1016/j.jmapro.2023.03.071 Morales LA. , Bezold A. , Förner A. , Holz H. , Merle B. , Neumeier S. , Körner C. , Zenk C. :Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe-Based alpha/alpha '/alpha '' Superalloy Advanced Engineering Materials 2023 )ISSN: 1438-1656 10.1002/adem.202201652 Nahr F. , Rasch M. , Burkhardt C. , Renner J. , Baumgärtner B. , Hausotte T. , Körner C. , Steinmann P. , Mergheim J. , Schmidt M. , Markl M. :Geometrical Influence on Material Properties for Ti6Al4V Parts in Powder Bed Fusion Journal of Manufacturing and Materials Processing 7 2023 ), p. 82 ISSN: 2504-4494 10.3390/jmmp7030082 Reith M. , Franke M. , Körner C. :Impact of the acceleration voltage on the processing of γ-TiAl via electron beam powder bed fusion Progress in Additive Manufacturing 2023 )ISSN: 2363-9512 10.1007/s40964-023-00499-4 Renner J. , Grund J. , Markl M. , Körner C. :A Ray Tracing Model for Electron Optical Imaging in Electron Beam Powder Bed Fusion Journal of Manufacturing and Materials Processing 7 2023 ), Article No.: 87 ISSN: 2504-4494 10.3390/jmmp7030087 Scherr R. , Markl M. , Körner C. :Volume of fluid based modeling of thermocapillary flow applied to a free surface lattice Boltzmann method Journal of Computational Physics 492 2023 ), Article No.: 112441 ISSN: 0021-9991 10.1016/j.jcp.2023.112441 Uddagiri M. , Shchyglo O. , Steinbach I. , Wahlmann B. , Körner C. :Phase-Field Study of the History-Effect of Remelted Microstructures on Nucleation During Additive Manufacturing of Ni-Based Superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2023 )ISSN: 1073-5623 10.1007/s11661-023-07004-0 Vaghela R. , Arkudas A. , Gage D. , Körner C. , von Hörsten S. , Salehi S. , Horch RE. , Hessenauer M. :A Novel Window into Angiogenesis — Intravital Microscopy in the AV-Loop-Model Cells 12 2023 ), Article No.: 261 ISSN: 2073-4409 10.3390/cells12020261 Vetter J. , Beneder S. , Kandler M. , Feyer F. , Körner C. , Schmidt M. :Impact of Particle Size Distribution in the Preform on Thermal Conductivity, Vickers Hardness and Tensile Strength of Copper-Infiltrated AISI H11 Tool Steel Materials 16 2023 ), p. 2659 ISSN: 1996-1944 10.3390/ma16072659 Wahlmann B. , Markl M. , Körner C. :A Thermo-Mechanical Model for Hot Cracking Susceptibility in Electron Beam Powder Bed Fusion of Ni-Base Superalloys Materials & Design 237 2023 ), p. 112528 ISSN: 0264-1275 10.1016/j.matdes.2023.112528 Yang J. , Fu Z. , Körner C. :Structure Design of Soft Magnetic Materials using Electron Beam‐based Additive Manufacturing Advanced Materials 2023 )ISSN: 0935-9648 10.1002/adma.202300837 Yang J. , Fu Z. , Wahl L. , Travitzky N. , Körner C. :Correlation Between Structural Features and Magnetic Performance of Fe93.5Si6.5 (wt.%) Soft Magnetic Materials Advanced Functional Materials 2023 )ISSN: 1616-301X 10.1002/adfm.202308194 Yang Z. , Huber F. , Krapf A. , Merle B. , Markl M. , Schmidt M. , Körner C. :Revealing bulk metallic glass crystallization kinetics during laser powder bed fusion by a combination of experimental and numerical methods Journal of Non-Crystalline Solids 619 2023 ), Article No.: 122532 ISSN: 0022-3093 10.1016/j.jnoncrysol.2023.122532 Yang Z. , Kuesters Y. , Logvinov R. , Markl M. , Körner C. :SAMPLE3D: A versatile numerical tool for investigating texture and grain structure of materials processed by PBF processes IVth International Conference on Simulation for Additive Manufacturing (Sim-AM 2023) (München 26. July 2023 - 28. July 2023 )10.23967/c.simam.2023.006 Ye J. , Renner J. , Körner C. , Fu Z. :Electron-optical observation of smoke evolution during electron beam powder bed fusion Additive Manufacturing 70 2023 ), Article No.: 103578 ISSN: 2214-7810 10.1016/j.addma.2023.103578 Zulla M. , Vierheilig V. , Koch M. , Burkovski A. , Karl M. , Rosiwal S. :Diamond as Insulation for Conductive Diamond—A Spotted Pattern Design for Miniaturized Disinfection Devices C – Journal of Carbon Research 9 2023 ), Article No.: 78 ISSN: 2311-5629 10.3390/c9030078
2022
Abdelnabi AABA. , Al Theeb N. , Almomani MAA. , Ghanem H. , Rosiwal S. :Effect of electrode parameters in the electro-production of reactive oxidizing species via boron-doped diamond under batch mode Water Environment Research 94 2022 )ISSN: 1061-4303 10.1002/wer.10830 Akhlaghi M. , Hock R. , Dallmann J. , Krapf A. , Merle B. , Hofsäss H. , Körner C. , Leineweber A. :Gaseous nitriding of Co-10 at% and -15 at% Cr alloys at 400 °C and 450 °C Journal of Alloys and Compounds 907 2022 )ISSN: 0925-8388 10.1016/j.jallcom.2022.164535 Arnold C. , Körner C. :Electron-optical in-situ metrology for electron beam powder bed fusion: calibration and validation Measurement Science & Technology 33 2022 ), Article No.: 014001 ISSN: 0957-0233 10.1088/1361-6501/ac2d5c Bezold A. , Volz N. , Lenz M. , Karpstein N. , Zenk C. , Spiecker E. , Göken M. , Neumeier S. :Quantification of the temperature-dependent evolution of defect structures in a CoNi-base superalloy Acta Materialia 227 2022 ), Article No.: 117702 ISSN: 1359-6454 10.1016/j.actamat.2022.117702 Bortoluci Ormastroni LM. , Lopez-Galilea I. , Pistor J. , Ruttert B. , Körner C. , Theisen W. , Villechaise P. , Pedraza F. , Cormier J. :Very high cycle fatigue durability of an additively manufactured single-crystal Ni-based superalloy Additive Manufacturing 54 2022 ), Article No.: 102759 ISSN: 2214-7810 10.1016/j.addma.2022.102759 Breuning C. , Pistor J. , Markl M. , Körner C. :Basic Mechanism of Surface Topography Evolution in Electron Beam Based Additive Manufacturing Materials 15 2022 ), Article No.: 4754 ISSN: 1996-1944 10.3390/ma15144754 Bäreis J. , Semjatov N. , Renner J. , Ye J. , Fu Z. , Körner C. :Electron-optical in-situ crack monitoring during electron beam powder bed fusion of the Ni-Base superalloy CMSX-4 Progress in Additive Manufacturing 2022 )ISSN: 2363-9512 10.1007/s40964-022-00357-9 Fiegl T. , Franke M. , Körner C. :Correlation of powder degradation, energy absorption and gas pore formation in laser-based powder bed fusion process of AlSi10Mg0.4 Additive Manufacturing 56 2022 )ISSN: 2214-7810 10.1016/j.addma.2022.102917 Fromm T. , Bruns S. , Müller MC. , Fink A. , Borchardt R. , Rosiwal S. , Durst K. :Bioinspired damage tolerant diamond-metal laminates by alternating CVD and PVD processes Materials & Design 213 2022 ), Article No.: 110315 ISSN: 0264-1275 10.1016/j.matdes.2021.110315 Fu Z. , Ye J. , Franke M. , Körner C. :A novel approach for powder bed-based additive manufacturing of compositionally graded composites Additive Manufacturing 56 2022 ), Article No.: 102916 ISSN: 2214-7810 10.1016/j.addma.2022.102916 Galgon F. , Melzer D. , Zenk C. , Dzugan J. , Körner C. :Miniature mechanical testing of LMD-fabricated compositionally & microstructurally graded γ titanium aluminides Journal of Materials Research 2022 )ISSN: 0884-2914 10.1557/s43578-022-00801-0 Git P. , Hofmeister M. , Singer R. , Körner C. :Fluidization behavior of graphitized glassy particles in a fluidized carbon bed cooling process for investment casting Particuology 65 2022 ), p. 32-38 ISSN: 1674-2001 10.1016/j.partic.2021.07.001 Gotterbarm M. :Kornstrukturmodifikation beim Selektiven Elektronenstrahlschmelzen der Nickelbasis-Superlegierung IN718 2022 )Guschlbauer R. :Grundlagen des selektiven Elektronenstrahlschmelzens von Reinkupfer 2022 )Hartmann J. :Mikrozellulare Aluminiumintegralschäume 2022 )Himmler D. , Randelzhofer P. , Körner C. :In-situ Al3Ti particle reinforcement for stiff aluminum die castings Journal of Alloys and Compounds 2022 ), Article No.: 163984 ISSN: 0925-8388 10.1016/j.jallcom.2022.163984 Hofer A. , Wachter S. , Döhler D. , Laube A. , Sánchez Batalla B. , Fu Z. , Weidlich C. , Struckmann T. , Körner C. , Bachmann J. :Practically applicable water oxidation electrodes from 3D-printed Ti6Al4V scaffolds with surface nanostructuration and iridium catalyst coating Electrochimica Acta 417 2022 ), p. 140308 ISSN: 0013-4686 10.1016/j.electacta.2022.140308 Ioannidou C. , König HH. , Semjatov N. , Ackelid U. , Staron P. , Körner C. , Hedström P. , Lindwall G. :In-situ synchrotron X-ray analysis of metal Additive Manufacturing: Current state, opportunities and challenges Materials and Design 219 2022 ), Article No.: 110790 ISSN: 0261-3069 10.1016/j.matdes.2022.110790 Knoerlein J. , Franke MM. , Schloffer M. , Körner C. :In-situ aluminum control for titanium aluminide via electron beam powder bed fusion to realize a dual microstructure Additive Manufacturing 59 2022 )ISSN: 2214-7810 10.1016/j.addma.2022.103132 Koch M. , Palarie V. , Göltz M. , Kurzer M. , Zulla M. , Rosiwal S. , Willner M. , Burkovski A. , Karl M. :Root Canal Obturation by Electrochemical Precipitation of Calcium Phosphates Applied Sciences 12 2022 ), Article No.: 2956 ISSN: 2076-3417 10.3390/app12062956 Koch M. , Palarie V. , Koch L. , Burkovski A. , Zulla M. , Rosiwal S. , Karl M. :Preclinical Testing of Boron-Doped Diamond Electrodes for Root Canal Disinfection—A Series of Preliminary Studies Microorganisms 10 2022 ), Article No.: 782 ISSN: 2076-2607 10.3390/microorganisms10040782 Kotzem D. , Teschke M. , Jüchter V. , Körner C. , Walther F. :Microstructure analysis and mechanical properties of electron beam powder bed fusion (PBF-EB)-manufactured gamma-titanium aluminide (TiAl) at elevated temperatures MP Materials Testing 64 2022 ), p. 636-646 ISSN: 0025-5300 10.1515/mt-2021-2137 Krohmer E. , Schmeiser F. , Wahlmann B. , Rosigkeit J. , Graf G. , Spoerk-Erdely P. , Clemens H. , Staron P. , Körner C. , Reimers W. , Uhlmann E. :Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA III Review of Scientific Instruments 93 2022 )ISSN: 0034-6748 10.1063/5.0077105 Luo N. :Laser-based additive manufacturing of bulk metallic glass-forming alloys: Processing, microstructure and properties 2022 )Luo N. , Galgon F. , Krauß S. , Morales LA. , Merle B. , Zenk C. , Körner C. :Microstructural evolution and mechanical properties in Zr–Cu–Al–Nb bulk metallic glass composites prepared by laser metal deposition Intermetallics 140 2022 ), Article No.: 107393 ISSN: 0966-9795 10.1016/j.intermet.2021.107393 Luo N. , Huber F. , Ciftci N. , Wahl L. , Bezold A. , Neumeier S. , Uhlenwinkel V. , Travitzky N. , Schmidt M. , Zenk C. , Körner C. :Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 2022 ), Article No.: 143405 ISSN: 0921-5093 10.1016/j.msea.2022.143405 Mavrikis S. , Göltz M. , Rosiwal S. , Wang L. , De Leon CP. :Carbonate-Induced Electrosynthesis of Hydrogen Peroxide via Two-Electron Water Oxidation Chemsuschem 2022 )ISSN: 1864-5631 10.1002/cssc.202102137 Morales Victoria L. , Luo N. , Li K. , Zenk C. , Körner C. :On stabilizing an α/α′/α″ microstructure in ferritic superalloys Journal of Alloys and Compounds 911 2022 ), Article No.: 164996 ISSN: 0925-8388 10.1016/j.jallcom.2022.164996 Pistor J. :Grundlegende Mechanismen bei der additiven Fertigung von technischen Einkristallen 2022 )Pistor J. , Hagen S. , Virtanen S. , Körner C. :Influence of the microstructural homogeneity on the high-temperature oxidation behavior of a single crystalline Ni-base superalloy Scripta Materialia 207 2022 ), Article No.: 114301 ISSN: 1359-6462 10.1016/j.scriptamat.2021.114301 Poller MJ. , Renz C. , Wolf T. , Körner C. , Wasserscheid P. , Albert J. :3D-Printed Raney-Cu POCS as Promising New Catalysts for Methanol Synthesis Catalysts 12 2022 )ISSN: 2073-4344 10.3390/catal12101288 Reith M. , Breuning C. , Franke M. , Körner C. :Impact of the Power-Dependent Beam Diameter during Electron Beam Additive Manufacturing: A Case Study with γ-TiAl Applied Sciences 12 2022 ), Article No.: 11300 ISSN: 2076-3417 10.3390/app122111300 Renner J. , Breuning C. , Markl M. , Körner C. :Surface topographies from electron optical images in electron beam powder bed fusion for process monitoring and control Additive Manufacturing 60 2022 ), Article No.: 103172 ISSN: 2214-7810 10.1016/j.addma.2022.103172 Steiner D. , Reinhardt L. , Fischer L. , Popp V. , Körner C. , Geppert CI. , Bäuerle T. , Horch RE. , Arkudas A. :Impact of Endothelial Progenitor Cells in the Vascularization of Osteogenic Scaffolds Cells 11 2022 ), Article No.: 926 ISSN: 2073-4409 10.3390/cells11060926 Vaghela R. , Arkudas A. , Gage D. , Körner C. , Von Hoersten S. , Salehi S. , Horch RE. , Hessenauer M. :Microvascular development in the rat arteriovenous loop model in vivo-A step by step intravital microscopy analysis Journal of Biomedical Materials Research Part A 2022 )ISSN: 1549-3296 10.1002/jbm.a.37395 Vetter J. , Huber F. , Wachter S. , Körner C. , Schmidt M. :Development of a Material Extrusion Additive Manufacturing Process of 1.2083 steel comprising FFF Printing, Solvent and Thermal Debinding and Sintering 21st CIRP Conference on Electro Physical and Chemical Machining, CIRP ISEM XXI 2022 (Zurich 14. June 2022 - 16. June 2022 )In: Procedia CIRP 2022 10.1016/j.procir.2022.09.140 Wahlmann B. , Bandorf J. , Volz N. , Förner A. , Pröbstle J. , Multerer K. , Göken M. , Markl M. , Neumeier S. , Körner C. :Numerical Design of CoNi-Base Superalloys With Improved Casting Structure Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2022 )ISSN: 1073-5623 10.1007/s11661-022-06870-4 Yang J. , Fu Z. , Ye J. , Kübrich D. , Körner C. :Electron beam-based additive manufacturing of Fe93.5Si6.5 (wt.%) soft magnetic material with controllable magnetic performance Scripta Materialia 210 2022 ), Article No.: 114460 ISSN: 1359-6462 10.1016/j.scriptamat.2021.114460 Yang Z. , Markl M. , Körner C. :Predictive simulation of bulk metallic glass crystallization during laser powder bed fusion Additive Manufacturing 59 2022 ), Article No.: 103121 ISSN: 2214-7810 10.1016/j.addma.2022.103121 Yang Z. , Wang H. , Krauß S. , Huber F. , Merle B. , Schmidt M. , Markl M. , Körner C. :Evolution of an industrial-grade Zr-based bulk metallic glass during multiple laser beam melting Journal of Non-Crystalline Solids 589 2022 ), Article No.: 121649 ISSN: 0022-3093 10.1016/j.jnoncrysol.2022.121649
2021
Adler L. :Grundlagen des Elektronenstrahlschmelzens von Fe3Al basierten Eisenaluminiden 2021 )Akhlaghi M. , Martin S. , Dallmann J. , Hock R. , Körner C. , Leineweber A. :Anisotropic nitriding behavior upon formation of expanded hcp in Co-Cr alloys Scripta Materialia 203 2021 )ISSN: 1359-6462 10.1016/j.scriptamat.2021.114041 Arnold C. , Breuning C. , Körner C. :Electron-Optical In Situ Imaging for the Assessment of Accuracy in Electron Beam Powder Bed Fusion Materials 14 2021 ), Article No.: 7240 ISSN: 1996-1944 10.3390/ma14237240 Arnold C. , Körner C. :In-situ electron optical measurement of thermal expansion in electron beam powder bed fusion Additive Manufacturing 46 2021 )ISSN: 2214-7810 10.1016/j.addma.2021.102213 Bezold A. , Volz N. , Lenz M. , Zenk C. , Spiecker E. , Mills MJ. , Göken M. , Neumeier S. :Yielding behavior of a single-crystalline γ'-strengthened Co-Ti-Cr superalloy Scripta Materialia 200 2021 ), p. 113928 ISSN: 1359-6462 10.1016/j.scriptamat.2021.113928 Breuning C. , Arnold C. , Markl M. , Körner C. :A multivariate meltpool stability criterion for fabrication of complex geometries in electron beam powder bed fusion Additive Manufacturing 45 2021 ), Article No.: 102051 ISSN: 2214-7810 10.1016/j.addma.2021.102051 Fiegl T. , Franke M. , Raza A. , Hryha E. , Körner C. :Effect of AlSi10Mg0.4 long-term reused powder in PBF-LB/M on the mechanical properties Materials & Design 212 2021 ), Article No.: 110176 ISSN: 0264-1275 10.1016/j.matdes.2021.110176 Förner A. , Vollhüter J. , Hausmann D. , Arnold C. , Felfer P. , Neumeier S. , Göken M. :Nanostructuring of Nb-Si-Cr Alloys by Electron Beam Melting to Improve the Mechanical Properties and the Oxidation Behavior Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2021 )ISSN: 1073-5623 10.1007/s11661-021-06516-x Gaag T. , Ritter N. , Peters A. , Volz N. , Gruber D. , Neumeier S. , Zenk C. , Körner C. :Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys Metals 11 2021 ), Article No.: 1707 ISSN: 2075-4701 10.3390/met11111707 Gruber D. :Halbautomatische Herstellung und Eigenschaften von in situ Al3Ti-verstärkten Aluminiumgusslegierungen im Druckgießen Giesserei 02/2021 2021 ), p. 61 ISSN: 0016-9765 Hessenauer M. , Vaghela R. , Körner C. , Von Horsten S. , Pobel C. , Gage D. , Muller C. , Salehi S. , Horch RE. , Arkudas A. :Watching the Vessels Grow: Establishment of Intravital Microscopy in the Arteriovenous Loop Rat Model Tissue Engineering - Part C: Methods 27 2021 ), p. 357-365 ISSN: 1937-3384 10.1089/ten.tec.2021.0024 Horst OM. , Schmitz D. , Schreuer J. , Git P. , Wang H. , Körner C. , Eggeler G. :Thermoelastic properties and γ’-solvus temperatures of single-crystal Ni-base superalloys Journal of Materials Science 2021 )ISSN: 0022-2461 10.1007/s10853-020-05628-w Kengelbach-Weigand A. , Thielen C. , Bäuerle T. , Götzl R. , Gerber T. , Körner C. , Beier J. , Horch RE. , Boos A. :Personalized medicine for reconstruction of critical-size bone defects – a translational approach with customizable vascularized bone tissue npj Regenerative Medicine 6 2021 ), Article No.: 49 ISSN: 2057-3995 10.1038/s41536-021-00158-8 Kergaßner A. , Köpf J. , Markl M. , Körner C. , Mergheim J. , Steinmann P. :A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials Journal of Materials Engineering and Performance 2021 )ISSN: 1059-9495 10.1007/s11665-021-05725-0 Küng V. , Scherr R. , Markl M. , Körner C. :Multi-material model for the simulation of powder bed fusion additive manufacturing Computational Materials Science 194 2021 )ISSN: 0927-0256 10.1016/j.commatsci.2021.110415 Leijon F. , Wachter S. , Fu Z. , Körner C. , Skjervold S. , Moverare J. :A novel rapid alloy development method towards powder bed additive manufacturing, demonstrated for binary Al-Ti, -Zr and -Nb alloys Materials & Design 211 2021 )ISSN: 0264-1275 10.1016/j.matdes.2021.110129 Mavrikis S. , Göltz M. , Perry SC. , Bogdan F. , Leung PK. , Rosiwal S. , Wang L. , Ponce-de-León C. :Effective Hydrogen Peroxide Production from Electrochemical Water Oxidation ACS Energy Letters 2021 2021 ), p. 2369−2377 ISSN: 2380-8195 10.1021/acsenergylett.1c00904 Meyer A. :Verbesserung der Kriechbeständigkeit der pulverspritzgegossenen Nickelbasis-Legierung CM247LC durch Legierungsentwicklung und Wärmebehandlung 2021 )Pistor J. , Breuning C. , Körner C. :A single crystal process window for electron beam powder bed fusion additive manufacturing of a CMSX-4 type Ni-based superalloy Materials 14 2021 ), Article No.: 3785 ISSN: 1996-1944 10.3390/ma14143785 Pistor J. , Körner C. :A novel mechanism to generate metallic single crystals Scientific Reports 11 2021 )ISSN: 2045-2322 10.1038/s41598-021-04235-2 Rausch A. , Pistor J. , Breuning C. , Markl M. , Körner C. :New grain formation mechanisms during powder bed fusion Materials 14 2021 ), Article No.: 3324 ISSN: 1996-1944 10.3390/ma14123324 Raza A. , Fiegl T. , Hanif I. , Markström A. , Franke M. , Körner C. , Hryha E. :Degradation of AlSi10Mg powder during laser based powder bed fusion processing Materials and Design 198 2021 ), Article No.: 109358 ISSN: 0261-3069 10.1016/j.matdes.2020.109358 Ritter N. :Bedeutung der Mischkristallhärter für die Kriechbeständigkeit Re-freier Nickelbasis-Einkristall-Legierungen 2021 )Rottensteiner-Brandl U. , Bertram U. , Lingens L. , Köhn K. , Distel L. , Fey T. , Körner C. , Horch RE. , Arkudas A. :Free Transplantation of a Tissue Engineered Bone Graft into an Irradiated, Critical-Size Femoral Defect in Rats Cells 10 2021 )ISSN: 2073-4409 10.3390/cells10092256 Roux LL. , Liu C. , Ji Z. , Kerfriden P. , Gage D. , Feyer F. , Körner C. , Bigot S. :Automatised quality assessment in additive layer manufacturing using layer-by-layer surface measurements and deep learning 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2020 (Naples, ITA 15. July 2020 - 17. July 2020 )In: Roberto Teti, Doriana M. D'Addona (ed.): Procedia CIRP 2021 10.1016/j.procir.2021.03.050 Sommerschuh M. , Wirth J. , Englisch S. , Przybilla T. , Apeleo Zubiri B. , Pistor J. , Merle B. , Körner C. , Göken M. , Spiecker E. :A scale-bridging study of the influence of TCP phases on the mechanical properties of an additive manufactured Ni-base superalloy combining microcompression testing, X-ray nanotomography and TEM Microscopy and Microanalysis 27 2021 ), p. 938-942 ISSN: 1431-9276 10.1017/S1431927621003603 Trudonoshyn O. , Randelzhofer P. , Körner C. :Heat treatment of high-pressure die casting Al-Mg-Si-Mn-Zn alloys Journal of Alloys and Compounds 2021 )ISSN: 0925-8388 10.1016/j.jallcom.2021.159692 Wahlmann B. , Krohmer E. , Breuning C. , Schell N. , Staron P. , Uhlmann E. , Körner C. :In‐situ Observation of γ' Phase Transformation Dynamics during Selective Laser Melting of CMSX‐4 Advanced Engineering Materials 2021 )ISSN: 1438-1656 10.1002/adem.202100112 Wahlmann B. , Körner C. , Nunn M. :Electron Beam Wire Cladding of Nickel Alloys and Stainless Steel on a Reactor Pressure Vessel Steel Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 2021 )ISSN: 0921-5093 10.1016/j.msea.2021.141082 Wahlmann B. , Leidel D. , Markl M. , Körner C. :Numerical Alloy Development for Additive Manufacturing towards Reduced Cracking Susceptibility Crystals 11 2021 )ISSN: 2073-4352 10.3390/cryst11080902 Warmuth F. :Zellulare mechanische Metamaterialien: Design, Herstellung und Charakterisierung 2021 )Wimler D. , Käsznar K. , Musi M. , Breuning C. , Markl M. , Keckes J. , Clemens H. , Körner C. , Mayer S. :How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted γ-TiAl based alloy Materials & Design 212 2021 ), Article No.: 110187 ISSN: 0264-1275 10.1016/j.matdes.2021.110187 Wormser M. , Kiefer DA. , Rupitsch S. , Körner C. :Comparison of Transmission Measurement Methods of Elastic Waves in Phononic Band Gap Materials Materials 2021 )ISSN: 1996-1944 10.3390/ma14051133 Wöllner S. , Nowak T. , Zhang GR. , Rockstroh N. , Ghanem H. , Rosiwal S. , Brückner A. , Etzold BJ. :Avoiding Pitfalls in Comparison of Activity and Selectivity of Solid Catalysts for Electrochemical HMF Oxidation ChemistryOpen 10 2021 ), p. 600-606 ISSN: 2191-1363 10.1002/open.202100072 Xuan Y. , Fromm T. , Bruns S. , Borchardt R. , Durst K. , Rosiwal S. :A simple way to make tough diamond/metal laminates Journal of the European Ceramic Society 2021 )ISSN: 0955-2219 10.1016/j.jeurceramsoc.2021.03.055 Yang Z. , Al-Mukadam R. , Stolpe M. , Markl M. , Deubener J. , Körner C. :Isothermal crystallization kinetics of an industrial-grade Zr-based bulk metallic glass Journal of Non-Crystalline Solids 573 2021 ), Article No.: 121145 ISSN: 0022-3093 10.1016/j.jnoncrysol.2021.121145 Yang Z. , Bauereiß A. , Markl M. , Körner C. :Modeling laser beam absorption of metal alloys at high temperatures for selective laser melting Advanced Engineering Materials 23 2021 ), Article No.: 2100137 ISSN: 1438-1656 10.1002/adem.202100137
2020
Adler L. , Fu Z. , Körner C. :Electron beam based additive manufacturing of Fe3Al based iron aluminides – Processing window, microstructure and properties Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 785 2020 ), Article No.: 139369 ISSN: 0921-5093 10.1016/j.msea.2020.139369 Al-Abdallat Y. , Jumah I. , Jumah R. , Ghanem H. , Telfah A. :Catalytic electrochemical water splitting using boron doped diamond (BDD) electrodes as a promising energy resource and storage solution Energies 13 2020 ), Article No.: 5265 ISSN: 1996-1073 10.3390/en13205265 Bieske J. , Franke M. , Schloffer M. , Körner C. :Microstructure and properties of TiAl processed via an electron beam powder bed fusion capsule technology Intermetallics 126 2020 ), Article No.: 106929 ISSN: 0966-9795 10.1016/j.intermet.2020.106929 Borchardt R. , Fromm T. , Haase A. , Fecher J. , Rosiwal S. :World's First Thermoelectric Generator Made of Tailored Carbon Allotropes Advanced Engineering Materials 2020 )ISSN: 1438-1656 10.1002/adem.202000108 Borchardt R. , Sand P. , Fromm T. , Rosiwal S. :Novel structuring technique for diamond coatings Diamond and Related Materials 110 2020 )ISSN: 0925-9635 10.1016/j.diamond.2020.108103 Börner R. , Göltz M. , Helmreich T. , Schubert A. , Rosiwal S. :Surface Microstructuring of Steel Components for CVD Diamond Coating by Ultrasonic Vibration Superimposed Face Milling using Tailored Tools 5th CIRP Conference on Surface Integrity, CSI 2020 (, 1. June 2020 - 5. June 2020 )In: Pedro Jose Arrazola, Aito Madariaga (ed.): Procedia CIRP 2020 10.1016/j.procir.2020.02.020 Förner A. , Giese S. , Arnold C. , Felfer P. , Körner C. , Neumeier S. , Göken M. :Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting Scientific Reports 10 2020 ), Article No.: 15153 ISSN: 2045-2322 10.1038/s41598-020-72093-5 Gotterbarm M. , Rausch A. , Körner C. :Fabrication of Single Crystals through a µ-Helix Grain Selection Process during Electron Beam Metal Additive Manufacturing Metals 2020 )ISSN: 2075-4701 10.3390/met10030313 Gotterbarm M. , Seifi M. , Melzer D. , Džugan J. , Salem AA. , Liu ZH. , Körner C. :Small scale testing of IN718 single crystals manufactured by EB-PBF Additive Manufacturing 36 2020 ), Article No.: 101449 ISSN: 2214-7810 10.1016/j.addma.2020.101449 Guschlbauer R. , Burkhardt AK. , Fu Z. , Körner C. :Effect of the oxygen content of pure copper powder on selective electron beam melting Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 779 2020 ), Article No.: 139106 ISSN: 0921-5093 10.1016/j.msea.2020.139106 Heinl M. , Greiner S. , Wudy K. , Pobel C. , Rasch M. , Huber F. , Papke T. , Merklein M. , Schmidt M. , Körner C. , Drummer D. , Hausotte T. :Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts Measurement Science and Technology 31 2020 ), p. 1-14 ISSN: 1361-6501 10.1088/1361-6501/ab89e2 Helmreich T. , Göltz M. , Mengele T. , Rosiwal S. :CVD-Diamant als Schutzschicht im Aluminiumguss Gießerei-Praxis 2020 ), p. 32-34 ISSN: 0016-9781 Heßelmann C. , Wolf T. , Galgon F. , Körner C. , Albert J. , Wasserscheid P. :Additively manufactured Raney-type Copper catalyst for methanol synthesis Catalysis: Science and Technology 10 2020 ), p. 164-168 ISSN: 2044-4753 10.1039/C9CY01657K Himmler D. , Randelzhofer P. , Körner C. :Formation kinetics and phase stability of in-situ Al3Ti particles in aluminium casting alloys with varying Si content Results in Materials 2020 )ISSN: 2590-048X 10.1016/j.rinma.2020.100103 Hofmeister M. :Entwicklung eines wirbelbettbasierten Feingussverfahrens zur Verbesserung der Erstarrungsmikrostruktur von gerichtet erstarrten Superlegierungsbauteilen 2020 )Horst OM. , Adler D. , Git P. , Wang H. , Streitberger J. , Holtkamp M. , Jöns N. , Singer R. , Körner C. , Eggeler G. :Exploring the fundamentals of Ni-based superalloy single crystal (SX) alloy design: Chemical composition vs. microstructure Materials & Design 195 2020 ), Article No.: 108976 ISSN: 0264-1275 10.1016/j.matdes.2020.108976 Horst OM. , Ibrahimkhel S. , Streitberger J. , Wochmjakow N. , Git P. , Scholz F. , Thome P. , Singer R. , Körner C. , Frenzel J. , Eggeler G. :On the Influence of Alloy Composition on Creep Behavior of Ni-Based Single-Crystal Superalloys (SXs) 14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA 12. September 2021 - 16. September 2021 )In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (ed.): Minerals, Metals and Materials Series 2020 10.1007/978-3-030-51834-9_6 Koch M. , Burkovski A. , Zulla M. , Rosiwal S. , Geissdorfer W. , Dittmar R. , Grobecker-Karl T. :Pilot Study on the Use of a Laser-Structured Double Diamond Electrode (DDE) for Biofilm Removal from Dental Implant Surfaces Journal of Clinical Medicine 9 2020 )ISSN: 2077-0383 10.3390/jcm9093036 Koch M. , Göltz M. , Meng X. , Karl M. , Rosiwal S. , Burkovski A. :Electrochemical Disinfection of Dental Implants Experimentally Contaminated with Microorganisms as a Model for Periimplantitis Journal of Clinical Medicine 2020 )ISSN: 2077-0383 10.3390/jcm9020475 Körner C. , Markl M. , Koepf JA. :Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2020 )ISSN: 1073-5623 10.1007/s11661-020-05946-3 Liu C. , Le Roux L. , Körner C. , Tabaste O. , Lacan F. , Bigot S. :Digital Twin-enabled Collaborative Data Management for Metal Additive Manufacturing Systems Journal of Manufacturing Systems 2020 )ISSN: 0278-6125 10.1016/j.jmsy.2020.05.010 Luo N. , Scheitler CJ. , Ciftci N. , Galgon F. , Fu Z. , Uhlenwinkel V. , Schmidt M. , Körner C. :Preparation of Fe-Co-B-Si-Nb bulk metallic glasses by laser powder bed fusion: Microstructure and properties Materials Characterization 162 2020 ), Article No.: 110206 ISSN: 1044-5803 10.1016/j.matchar.2020.110206 Mavrikis S. , Göltz M. , Rosiwal S. , Wang L. , Ponce-de-León C. :Boron-Doped Diamond Electrocatalyst for Enhanced Anodic H2O2 Production ACS Applied Energy Materials 2020 )ISSN: 2574-0962 10.1021/acsaem.0c00093 Nguyen BD. , Rausch A. , Steiner J. , Wellmann P. , Sandfeld S. :On the importance of dislocation flow in continuum plasticity models for semiconductor materials Journal of Crystal Growth 532 2020 ), Article No.: 125414 ISSN: 0022-0248 10.1016/j.jcrysgro.2019.125414 Prach O. , Trudonoshyn O. , Randelzhofer P. , Körner C. , Durst K. :Multi-alloying effect of Sc, Zr, Cr on the Al-Mg-Si-Mn high-pressure die casting alloys Materials Characterization 168 2020 )ISSN: 1044-5803 10.1016/j.matchar.2020.110537 Rausch A. , Gotterbarm M. , Pistor J. , Markl M. , Körner C. :New grain formation by constitutional undercooling due to remelting of segregated microstructures during powder bed fusion Materials 13 2020 ), p. 1-14 ISSN: 1996-1944 10.3390/ma13235517 Reith M. , Franke M. , Schloffer M. , Körner C. :Processing 4th generation titanium aluminides via electron beam based additive manufacturing – characterization of microstructure and mechanical properties Materialia 14 2020 ), Article No.: 100902 ISSN: 2589-1529 10.1016/j.mtla.2020.100902 Sheng N. , Meyer A. , Horke K. , Körner C. , Singer R. :Secondary Recrystallization of Nickel-Base Superalloy CM 247 LC After Processing by Metal Injection Molding Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2020 )ISSN: 1073-5623 10.1007/s11661-020-06087-3 Slyudova A. , Trudonoshyn O. , Prach O. , Lisovskii V. :Morphology and Nucleation of Intermetallic Phases in Casting Al–Mg–Si Alloys Metallography, Microstructure, and Analysis 2020 )ISSN: 2192-9262 10.1007/s13632-020-00702-w Trudonoshyn O. :Design of Al-Mg-Si-Mn alloys with Zn, Cr and Sc additions with unique strengthening response 2020 )Trudonoshyn O. :Studying the Structure of Al–Mg–Si Casting Alloys Doped by Lithium Physics of Metals and Metallography 121 2020 ), p. 701-707 ISSN: 0031-918X 10.1134/S0031918X2007011X Trudonoshyn O. , Prach O. , Randelzhofer P. , Durst K. , Körner C. :Heat treatment of the new high-strength high-ductility Al–Mg–Si–Mn alloys with Sc, Zr and Cr additions Materialia 15 2020 ), Article No.: 100981 ISSN: 2589-1529 10.1016/j.mtla.2020.100981 Trudonoshyn O. , Prach O. , Slyudova A. , Lisovskii V. :Structure formation and multistep nucleation in Casting Al-Mg-Si alloys International Journal of Cast Metals Research 2020 )ISSN: 1364-0461 10.1080/13640461.2020.1822632 Volz N. , Zenk C. , Halvaci T. , Matuszewska K. , Neumeier S. , Göken M. :Castability and Recrystallization Behavior of γ′-Strengthened Co-Base Superalloys 10.1007/978-3-030-51834-9_88 Winkler S. , Mutschall H. , Biggemann J. , Fey T. , Greil P. , Körner C. , Weisbach VG. , Meyer-Lindenberg A. , Arkudas A. , Horch RE. , Steiner D. :Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model Tissue Engineering - Part A 2020 )ISSN: 1937-335X 10.1089/ten.tea.2020.0087 Wolf T. , Fu Z. , Ye J. , Heßelmann C. , Pistor J. , Albert J. , Wasserscheid P. , Körner C. :Periodic open cellular Raney-Copper-Catalysts fabricated via selective electron beam melting Advanced Engineering Materials 2020 )ISSN: 1438-1656 10.1002/adem.201901524 Zeng Y. , Himmler D. , Randelzhofer P. , Körner C. :Processing of in situ Al3Ti/Al composites by advanced high shear technology: influence of mixing speed International Journal of Advanced Manufacturing Technology 110 2020 ), p. 1589-1599 ISSN: 0268-3768 10.1007/s00170-020-05956-w Zenk C. , Volz N. , Bezold A. , Huber LK. , Eggeler Y. , Spiecker E. , Göken M. , Neumeier S. :The Effect of Alloying on the Thermophysical and Mechanical Properties of Co–Ti–Cr-Based Superalloys 10.1007/978-3-030-51834-9_89 Zenk C. , Volz N. , Zenk C. , Felfer P. , Neumeier S. :Impact of the Co/Ni-Ratio on Microstructure, Thermophysical Properties and Creep Performance of Multi-Component γ′-Strengthened Superalloys Crystals 10 2020 ), p. 1058 ISSN: 2073-4352 10.3390/cryst10111058
2019
Arnold C. , Böhm J. , Körner C. :In Operando Monitoring by Analysis of Backscattered Electrons during Electron Beam Melting Advanced Engineering Materials 22 2019 ), Article No.: 1901102 ISSN: 1438-1656 10.1002/adem.201901102 Böhm AL. , Koch M. , Rosiwal S. , Burkovski A. , Karl M. , Grobecker-Karl T. :Electrochemical Disinfection of Experimentally Infected Teeth by Boron-Doped Diamond Electrode Treatment Journal of Clinical Medicine 2019 )ISSN: 2077-0383 10.3390/jcm8122037 Bürger D. , Parsa AB. , Ramsperger M. , Körner C. , Eggeler G. :Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 762 2019 ), Article No.: 138098 ISSN: 0921-5093 10.1016/j.msea.2019.138098 Fiegl T. , Franke M. , Körner C. :Impact of build envelope on the properties of additive manufactured parts from AlSi10Mg Optics and Laser Technology 111 2019 ), p. 51-57 ISSN: 0030-3992 10.1016/j.optlastec.2018.08.050 Göltz M. , Koch M. , Detsch R. , Karl M. , Burkovski A. , Rosiwal S. :Influence of In-Situ Electrochemical Oxidation on Implant Surface and Colonizing Microorganisms Evaluated by Scanning Electron Microscopy Materials 12 2019 ), Article No.: 3977 ISSN: 1996-1944 10.3390/ma12233977 Haase A. :Dotierung von CVD-Diamant für die n-Leitung 2019 )Heßelmann C. , Wolf T. , Körner C. , Albert J. , Wasserscheid P. :Additive manufacturing meets reaction engineering - Novel Raney® copper catalyst structures for methanol synthesis 2019 DGMK International Conference on Circular Economy - A Fresh View on Petrochemistry (Dresden, DEU 9. October 2019 - 11. October 2019 )In: H. Blanke, H. Hager, A. Jess, J. A. Lercher, M. Marchionna, D. Vogt, M. Bender (ed.): DGMK Tagungsbericht 2019 Horke K. , Keilholz P. , Meyer A. , Singer RF. :Influence of carbon content on the grain size and creep resistance of a metal injection moulded nickel-base superalloy European Powder Metallurgy Congress and Exhibition, Euro PM 2019 (Maastricht 13. October 2019 - 16. October 2019 )In: Euro PM 2019 Congress and Exhibition 2019 Horke K. , Meyer A. , Singer RF. :Metal injection molding (MIM) of nickel-base superalloys In: Donald F. Heaney (ed.): Handbook of Metal Injection Molding (2nd edition) 2019 , p. 575-608 (Woodhead Publishing Series in Metals and Surface Engineering) 10.1016/B978-0-08-102152-1.00028-3 Köpf J. , Soldner D. , Ramsperger M. , Mergheim J. , Markl M. , Körner C. :Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting Computational Materials Science 162 2019 ), p. 148-155 ISSN: 0927-0256 10.1016/j.commatsci.2019.03.004 Lomakin K. , Guschlbauer R. , Osmanlic F. , Fu Z. , Sippel M. , Helmreich K. , Körner C. , Vossiek M. , Gold G. :3D Printed Copper Waveguides by Selective Electron Beam Melting Process for E-Band EuMW 2019 (Paris 10.23919/EuMC.2019.8910893 Markl M. , Rausch A. , Küng V. , Körner C. :SAMPLE: A Software Suite to Predict Consolidation and Microstructure for Powder Bed Fusion Additive Manufacturing Advanced Engineering Materials 2019 ), Article No.: 1901270 ISSN: 1438-1656 10.1002/adem.201901270 Meid C. , Dennstedt A. , Ramsperger M. , Pistor J. , Ruttert B. , Lopez-Galilea I. , Theisen W. , Körner C. , Bartsch M. :Effect of heat treatment on the high temperature fatigue life of single crystalline nickel base superalloy additively manufactured by means of selective electron beam melting Scripta Materialia 168 2019 ), p. 124-128 ISSN: 1359-6462 10.1016/j.scriptamat.2019.05.002 Müller A. , Roslyakova I. , Sprenger M. , Git P. , Rettig R. , Markl M. , Körner C. , Singer R. :MultOpt++: a fast regression-based model for the development of compositions with high robustness against scatter of element concentrations Modelling and Simulation in Materials Science and Engineering 27 2019 )ISSN: 0965-0393 10.1088/1361-651X/aaf0b8 Müller A. , Sprenger M. , Ritter N. , Rettig R. , Markl M. , Körner C. , Singer R. :MultOpt++: a fast regression-based model for the constraint violation fraction due to composition uncertainties Modelling and Simulation in Materials Science and Engineering 27 2019 )ISSN: 0965-0393 10.1088/1361-651X/aaf01e Osmanlic F. :Modeling of Selective Laser Sintering of Viscoelastic Polymers 2019 )Pistor J. , Körner C. :Formation of topologically closed packed phases within CMSX-4 single crystals produced by additive manufacturing Materials Letters 1 2019 )ISSN: 0167-577X 10.1016/j.mlblux.2019.100003 Pobel C. , Arnold C. , Osmanlic F. , Fu Z. , Körner C. :Immediate development of processing windows for selective electron beam melting using layerwise monitoring via backscattered electron detection Materials Letters 249 2019 ), p. 70 - 72 ISSN: 0167-577X 10.1016/j.matlet.2019.03.048 Pobel C. , Osmanlic F. , Lodes M. , Wachter S. , Körner C. :Processing windows for Ti-6Al-4V fabricated by selective electron beam melting with improved beam focus and different scan line spacings Rapid Prototyping Journal 25 2019 ), p. 665-671 ISSN: 1355-2546 10.1108/RPJ-04-2018-0084 Pobel C. , Reichel S. , Fu Z. , Osmanlic F. , Körner C. :Advanced process strategy to realize microducts free of powder using selective electron beam melting International Journal of Advanced Manufacturing Technology 2019 )ISSN: 0268-3768 10.1007/s00170-019-03615-3 Prach O. , Trudonoshyn O. , Randelzhofer P. , Körner C. , Durst K. :Effect of Zr, Cr and Sc on the Al–Mg–Si–Mn high-pressure die casting alloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 2019 )ISSN: 0921-5093 10.1016/j.msea.2019.05.038 Randelzhofer P. :Bohrhaken-Material-Korrosion bergundsteigen 107 2019 )ISSN: 2073-0136 Rasch M. , Heberle J. , Dechet M. , Bartels D. , Gotterbarm M. , Klein L. , Gorunov A. , Schmidt J. , Körner C. , Peukert W. , Schmidt M. :Grain Structure Evolution of Al–Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties Materials 13 2019 )ISSN: 1996-1944 10.3390/ma13010082 Schorr B. , Ghanem H. , Rosiwal S. , Geißdörfer W. , Burkovski A. :Elimination of bacterial contaminations by treatment of water with boron-doped diamond electrodes World Journal of Microbiology & Biotechnology 35 2019 ), Article No.: 48 ISSN: 0959-3993 10.1007/s11274-019-2624-y Trudonoshyn O. , Prach O. :Multistep nucleation and multi-modification effect of Sc in hypoeutectic Al-Mg-Si alloys Heliyon 5 2019 )ISSN: 2405-8440 10.1016/j.heliyon.2019.e01202 Trudonoshyn O. , Rehm S. , Randelzhofer P. , Körner C. :Improvement of the high-pressure die casting alloy Al-5.7Mg-2.6Si-0.7Mn with Zn addition Materials Characterization 158 2019 )ISSN: 1044-5803 10.1016/j.matchar.2019.109959 Vasconcelos VM. , Ponce-de-León C. , Rosiwal S. , Lanza MRV. :Electrochemical Degradation of Reactive Blue 19 Dye by Combining Boron-Doped Diamond and Reticulated Vitreous Carbon Electrodes ChemElectroChem 2019 )ISSN: 2196-0216 10.1002/celc.201900563 Wahlmann B. , Galgon F. , Stark A. , Gayer S. , Schell N. , Staron P. , Körner C. :Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions Acta Materialia 2019 )ISSN: 1359-6454 10.1016/j.actamat.2019.08.049 Wedler J. , Körner C. :Sensor-based Observation and Numerical Simulation of Mold Filling During High Pressure Die Casting Giesserei 2019 ), p. 18-25 ISSN: 0016-9765 Wolf T. , Fu Z. , Körner C. :Selective electron beam melting of an aluminum bronze: Microstructure and mechanical properties Materials Letters 238 2019 ), p. 241-244 ISSN: 0167-577X 10.1016/j.matlet.2018.12.015 Zeng Y. :In-situ Al3Ti/Al composites produced by high shear technology: microstructure and mechanical properties 2019 )Zeng Y. , Himmler D. , Randelzhofer P. , Körner C. :In situ Al3Ti/Al composites fabricated by high shear technology: microstructure and mechanical properties Materials Science and Technology 35 2019 ), p. 2294-2303 ISSN: 0267-0836 10.1080/02670836.2019.1677025 Özkan S. , Ghanem H. , Mohajernia S. , Hejazi S. , Fromm T. , Borchardt R. , Rosiwal S. , Schmuki P. :Boron-doped diamond (BDD) as an efficient back contact to thermally grown TiO2 photoelectrodes ChemElectroChem 2019 )ISSN: 2196-0216 10.1002/celc.201901073
2018
Arnold C. , Pobel C. , Osmanlic F. , Körner C. :Layerwise monitoring of electron beam melting via backscatter electron detection Rapid Prototyping Journal 24 2018 ), p. 1401 - 1406 ISSN: 1355-2546 10.1108/RPJ-02-2018-0034 Bauereiß A. :Mesoskopische Simulation des selektiven Strahlschmelzens mittels einer Lattice Boltzmann Methode mit dynamischer Gitteranpassung 2018 )Guschlbauer R. , Momeni S. , Osmanlic F. , Körner C. :Process development of 99.95% pure copper processed via selective electron beam melting and its mechanical and physical properties Materials Characterization 2018 )ISSN: 1044-5803 10.1016/j.matchar.2018.04.009 Hübner D. , Gotterbarm M. , Kergaßner A. , Köpf J. , Pobel C. , Markl M. , Mergheim J. , Steinmann P. , Körner C. , Stingl M. :Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization iCAT 2018 (Maribor 10. October 2018 - 11. October 2018 )In: Proceedings of 7th International Conference on Additive Technologies 2018 Jum'h I. , Abdelhay A. , Telfah A. , Al-Akhras MA. , Al-Kazwini A. , Rosiwal S. :Veratric acid removal from water by electrochemical oxidation on BDD anode 2nd International Conference on Advanced Materials, ICAM 2017 (Irbid 10. July 2017 - 13. July 2017 )In: IOP Conference Series: Materials Science and Engineering Volume 305 2018 10.1088/1757-899X/305/1/012021 Jüchter V. :Grundlagen des Selektiven Elektronenstrahlschmelzens von Titanaluminiden 2018 )Jüchter V. , Franke M. , Merenda T. , Stich A. , Körner C. , Singer R. :Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications Additive Manufacturing 22 2018 ), p. 118-126 ISSN: 2214-7810 10.1016/j.addma.2018.05.008 Köpf J. , Gotterbarm M. , Markl M. , Körner C. :3D multi-layer grain structure simulation of powder bed fusion additive manufacturing Acta Materialia 152 2018 ), p. 119-126 ISSN: 1359-6454 10.1016/j.actamat.2018.04.030 Köpf J. , Rasch M. , Meyer A. , Markl M. , Schmidt M. , Körner C. :3D grain growth simulation and experimental verification in laser beam melting of IN718 10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth 4. September 2018 - 6. September 2018 )In: Procedia CIRP 74 (2018) 2018 10.1016/j.procir.2018.08.034 https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf Körner C. , Ramsperger M. , Meid C. , Bürger D. , Wollgramm P. , Bartsch M. , Eggeler G. :Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49 2018 ), p. 3781-3792 ISSN: 1073-5623 10.1007/s11661-018-4762-5 Küng V. , Osmanlic F. , Markl M. , Körner C. :Comparison of passive scalar transport models coupled with the Lattice Boltzmann method Computers & Mathematics with Applications 2018 )ISSN: 0898-1221 10.1016/j.camwa.2018.01.017 Kütemeyer M. , Helmreich T. , Rosiwal S. , Koch D. :Influence of zirconium-based alloys on manufacturing and mechanical properties of ultra high temperature ceramic matrix composites Advances in Applied Ceramics 117 2018 ), p. 62-69 ISSN: 1743-6753 10.1080/17436753.2018.1509810 Markl M. , Körner C. :Powder layer deposition algorithm for additive manufacturing simulations Powder Technology 330 2018 ), p. 125-136 ISSN: 0032-5910 10.1016/j.powtec.2018.02.026 Markl M. , Müller A. , Ritter N. , Hofmeister M. , Naujoks D. , Schaar H. , Abrahams K. , Frenzel J. , Subramanyam APA. , Ludwig A. , Pfetzing-Micklich J. , Hammerschmidt T. , Drautz R. , Steinbach I. , Rettig R. , Singer R. , Körner C. :Development of Single-Crystal Ni-Base Superalloys Based on Multi-criteria Numerical Optimization and Efficient Use of Refractory Elements Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A 2018 ), p. 4134-4145 ISSN: 1073-5623 10.1007/s11661-018-4759-0 Momeni S. , Guschlbauer R. , Osmanlic F. , Körner C. :Selective electron beam melting of a copper-chrome powder mixture Materials Letters 223 2018 ), p. 250-252 ISSN: 0167-577X 10.1016/j.matlet.2018.03.194 Novak N. , Borovinsek M. , Vesenjak M. , Wormser M. , Körner C. , Tanaka S. , Hokamoto K. , Ren Z. :Crushing Behavior of Graded Auxetic Structures Built from Inverted Tetrapods under Impact physica status solidi (b) 2018 )ISSN: 0370-1972 10.1002/pssb.201800040 Osmanlic F. , Wudy K. , Laumer T. , Schmidt M. , Drummer D. , Körner C. :Modeling of Laser Beam Absorption in a Polymer Powder Bed Polymers 10 2018 )ISSN: 2073-4360 10.3390/polym10070784 Pobel C. , Lodes M. , Körner C. :Selective Electron Beam Melting of Oxide Dispersion Strengthened Copper Advanced Engineering Materials 20 2018 )ISSN: 1438-1656 10.1002/adem.201800068 Ramsperger M. :Selektives Elektronenstrahlschmelzen der einkristallinen Ni-Basis Superlegierung CMSX-4 2018 )Rausch A. , Markl M. , Körner C. :Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution Computers & Mathematics with Applications 2018 )ISSN: 0898-1221 10.1016/j.camwa.2018.06.029 Ritter N. , Sowa R. , Schauer JC. , Gruber D. , Göhler T. , Rettig R. , Körner C. , Singer R. :Effects of Solid Solution Strengthening Elements Mo, Re, Ru, and W on Transition Temperatures in Nickel-Based Superalloys with High γ′-Volume Fraction: Comparison of Experiment and CALPHAD Calculations Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2018 )ISSN: 1073-5623 10.1007/s11661-018-4730-0 Schwankl M. , Himmler D. , Urban M. , Körner C. :Optimization of Mechanical Properties of Al–Al‐Compound Castings by Adapted Heat Treatment Advanced Engineering Materials 2018 )ISSN: 1438-1656 10.1002/adem.201800400 Sheng N. , Horke K. , Meyer A. , Rettig R. , Singer R. :Oxidation Behavior of Superalloy IN 713 Fabricated by Metal Injection Molding Oxidation of Metals 2018 )ISSN: 0030-770X 10.1007/s11085-018-9869-y Winkler A. , Modler N. , Drossel WG. , Mäder T. , Körner C. :High-Volume Production-Compatible Technologies for Light Metal and Fiber Composite-Based Components with Integrated Piezoceramic Sensors and Actuators Advanced Engineering Materials 20 2018 ), Article No.: 1801001 ISSN: 1438-1656 10.1002/adem.201801001 Wormser M. , Adler L. , Körner C. :Mechanische zellulare Metamaterialien aus Metall durch Selektives Elektronenstrahlschmelzen In: DGM (ed.): Materialwissenschaft und Werkstofftechnik:
Zellulare Werkstoffe · Zellulare Materialien 2018 , p. 16-24 (Dialog, Vol.2/2018) Zeng Y. , Himmler D. , Randelzhofer P. , Körner C. :Microstructures and Mechanical Properties of Al3Ti/Al Composites Produced In Situ by High Shearing Technology Advanced Engineering Materials 2018 )ISSN: 1438-1656 10.1002/adem.201800259
2017
Arkudas A. , Lipp A. , Bührer G. , Arnold I. , Davinova D. , Brandl A. , Beier J. , Körner C. , Lyer S. , Alexiou C. , Kneser U. , Horch RE. :Pedicled Transplantation of Axially Vascularized Bone Constructs in a Critical Size Femoral Defect Tissue Engineering: Parts A, B, and C 2017 )ISSN: 1937-3368 10.1089/ten.tea.2017.0110 Do G. , Stiegler T. , Fiegl M. , Adler L. , Körner C. , Bösmann A. , Freund HD. , Schwieger W. , Wasserscheid P. :Electrophoretic Deposition of Boehmite on Additively Manufactured, Interpenetrating Periodic Open Cellular Structures for Catalytic Applications Industrial & Engineering Chemistry Research 56 2017 ), p. 13403-13411 ISSN: 0888-5885 10.1021/acs.iecr.7b02453 Grodzki J. :Auswirkungen der Elemente B, Zr und C auf die Korngrenzenrissbildung einer gerichtet erstarrten Nickelbasis-Superlegierung 2017 )Hilbinger RM. , Gerth S. , Randelzhofer P. :Creation and characterization of specimen with pores for fatigue tests and castings process simulation Materialwissenschaft und Werkstofftechnik 48 2017 ), p. 77-87 ISSN: 1521-4052 10.1002/mawe.201600706 Hofmeister M. , Franke M. , Körner C. , Singer R. :Single Crystal Casting with Fluidized Carbon Bed Cooling: A Process Innovation for Quality Improvement and Cost Reduction Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science 48 2017 ), p. 3132-3142 ISSN: 1073-5615 10.1007/s11663-017-1110-x Horke K. :Mikrostruktur und mechanische Eigenschaften der Nickelbasis-Superlegierung IN 713LC nach Verarbeitung im pulvermetallurgischen Spritzguss für Triebwerksanwendungen 2017 )Klassen A. :Simulation von Verdampfungsphänomenen beim selektiven Elektronenstrahlshmelzen 2017 )Klassen A. , Forster V. , Jüchter V. , Körner C. :Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl Journal of Materials Processing Technology 247 2017 ), p. 280-288 ISSN: 0924-0136 10.1016/j.jmatprotec.2017.04.016 Klassen A. , Forster V. , Körner C. :A multi-component evaporation model for beam melting processes Modelling and Simulation in Materials Science and Engineering 25 2017 ), Article No.: 025003 ISSN: 1361-651X 10.1088/1361-651X/aa5289 Köpf J. , Markl M. , Körner C. :3D multilayer grain structure simulation for beam-based additive manufacturing 2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, DEU 11. October 2017 - 13. October 2017 )In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017 Markl M. , Lodes M. , Franke M. , Körner C. :Additive Fertigung durch selektives Elektronenstrahlschmelzen Schweissen und Schneiden 2017 ), p. 30-39 ISSN: 0036-7184 Markl M. , Lodes M. , Franke M. , Körner C. :Additive manufacturing using selective electron beam melting Welding and Cutting 2017 ), p. 177-184 ISSN: 1612-3433 Markl M. , Rausch A. , Forster V. , Pobel C. , Körner C. :Predictive numerical simulations of processing windows for powder bed based additive manufacturing 2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich 11. October 2017 - 13. October 2017 )In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017 Meyer A. , Horke K. , Daenicke E. , Müller S. , Langer I. , Singer R. :Metal injection molding of nickel-base superalloy CM247LC: Influence of heat treatment on the microstructure and mechanical properties 2017 International Conference on Powder Metallurgy and Particulate Materials, POWDERMET 2017 (Las Vegas 13. June 2017 - 16. June 2017 )https://www.scopus.com/record/display.uri?eid=2-s2.0-85051519583&origin=inward Plötz S. , Lohmüller A. , Singer R. :Influence of Ti and Zn on particle incorporation of AlB2, B and B4C particles in aluminum using the stir casting process Key Engineering Materials 742 2017 ), p. 173-180 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.742.173 Rai A. , Helmer H. , Körner C. :Simulation of grain structure evolution during powder bed based additive manufacturing Additive Manufacturing 13 2017 ), p. 124-134 ISSN: 2214-7810 10.1016/j.addma.2016.10.007 Rausch A. , Küng V. , Pobel C. , Markl M. , Körner C. :Predictive Simulation of Process Windows for Powder Bed Fusion Additive Manufacturing: Influence of the Powder Bulk Density Materials 10 2017 )ISSN: 1996-1944 10.3390/ma10101117 Riedlbauer DR. , Scharowsky T. , Singer R. , Steinmann P. , Körner C. , Mergheim J. :Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V International Journal of Advanced Manufacturing Technology 2017 )ISSN: 0268-3768 10.1007/s00170-016-8819-6 http://link.springer.com/article/10.1007/s00170-016-8819-6 Ritter N. , Schesler E. , Müller A. , Rettig R. , Körner C. , Singer R. :On the Influence of Ta and Ti on Heat-Treatability and γ/γ'-Partitioning of High W Containing Re-Free Nickel-Based Superalloys Advanced Engineering Materials 2017 )ISSN: 1438-1656 10.1002/adem.201700150 Rosiwal S. , Helmreich T. , Mengele T. , Ballmes H. , Hausmann C. , Regenberg C. :Diamant auf Stahl gegen den Oberflächenverschleiß durch Aluminiumanhaftungen Konstruktion 2017 ), p. IW8-IW9 ISSN: 0720-5953 Saefkow M. , List M. , Schubert A. , Lohmüller A. , Singer R. :Continuous powder extrusion for fabrication of carbon fibre reinforced aluminium Key Engineering Materials 742 2017 ), p. 158-164 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.742.158 Scharowsky T. , Bauereiß A. , Körner C. :Influence of the hatching strategy on consolidation during selective electron beam melting of Ti-6Al-4V International Journal of Advanced Manufacturing Technology 2017 ), p. 1-10 ISSN: 0268-3768 10.1007/s00170-017-0375-1 Sheng N. , Horke K. , Meyer A. , Gotterbarm M. , Rettig R. , Singer R. :Surface recrystallization and its effect on oxidation of superalloy C263 Corrosion Science 128 2017 ), p. 186-197 ISSN: 0010-938X 10.1016/j.corsci.2017.09.020 Stein S. , Wedler J. , Rhein S. , Schmidt M. , Körner C. , Michaelis A. , Gebhardt S. :A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures Results in Physics 2017 )ISSN: 2211-3797 10.1016/j.rinp.2017.07.034 Warmuth F. , Adler L. , Osmanlic F. , Lodes M. , Körner C. :Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting Smart Materials and Structures 26 2017 ), Article No.: 025013 ISSN: 1361-665X 10.1088/1361-665X/26/2/025013 Warmuth F. , Wormser M. , Körner C. :Single phase 3D phononic band gap material Scientific Reports 2017 ), Article No.: 3843 ISSN: 2045-2322 10.1038/s41598-017-04235-1 Wormser M. , Warmuth F. , Körner C. :Evolution of full phononic band gaps in periodic cellular structures Applied Physics A: Solids and Surfaces 2017 ), Article No.: 123:661 ISSN: 0721-7250 10.1007/s00339-017-1278-6 Wormser M. , Wein F. , Stingl M. , Körner C. :Design and Additive Manufacturing of 3D Phononic Band Gap Structures Based on Gradient Based Optimization Materials 10 2017 )ISSN: 1996-1944 10.3390/ma10101125
2016
Adler L. , Warmuth F. , Lodes M. , Osmanlic F. , Körner C. :The effect of a negative Poisson's ratio on thermal stresses in cellular metallic structures Smart Materials and Structures 25 2016 ), Article No.: 115038 ISSN: 1361-665X 10.1088/0964-1726/25/11/115038 Bauer M. , Schornbaum F. , Godenschwager C. , Markl M. , Anderl D. , Köstler H. , Rüde U. :A Python extension for the massively parallel multiphysics simulation framework waLBerla International Journal of Parallel, Emergent and Distributed Systems 31 2016 ), p. 529-542 ISSN: 1744-5760 10.1080/17445760.2015.1118478 https://www.tandfonline.com/doi/abs/10.1080/17445760.2015.1118478 Fecher J. :Bordotierte Diamantfolie: Herstellung und thermoelektrische Eigenschaften 2016 )Fecher J. , Wormser M. , Rosiwal S. :Long term oxidation behavior of micro- and nano-crystalline CVD diamond foils Diamond and Related Materials 61 2016 ), p. 41-45 ISSN: 0925-9635 10.1016/j.diamond.2015.11.009 Ghanem H. , Rosiwal S. , Göltz M. , Espin D. :Application of Electrochemical Treatment Technology of Produced Water of a Heavy Oil Field, via Boron Doped Diamond BDD Electrode SPE Latin America and Caribbean Heavy and Extra Heavy Oil Conference (Lima 19. October 2016 - 20. October 2016 )In: Proceedings of SPE Latin America and Caribbean Heavy and Extra Heavy Oil Conference 2016 Goehler T. , Schwalbe C. , Svoboda J. , Affeldt E. , Singer R. :Discussing the effect of gamma prime coarsening on high temperature low stress creep deformation with respect to the role of refractory elements 13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs 11. September 2016 - 15. September 2016 )In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (ed.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016 10.1002/9781119075646.ch70 Grodzki J. , Hartmann N. , Rettig R. , Affeldt E. , Singer R. :Effect of B, Zr, and C on Hot Tearing of a Directionally Solidified Nickel-Based Superalloy Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 2016 ), p. 2914-2926 ISSN: 1073-5623 10.1007/s11661-016-3416-8 Gruhl M. :Endkonturnahe Formgebung von Graphitbauteilen durch Pulverspritzguss von Mesophasenkohlenstoff mit wasserbasierten Bindersystemen 2016 )Göhler T. :Designkriterien für rheniumreduzierte Nickelbasis-Einkristalllegierungen: Identifikation und rechnergestützte Umsetzung 2016 )Haase A. , Peters A. , Rosiwal S. :Growth and thermoelectric properties of nitrogen-doped diamond/graphite Diamond and Related Materials 63 2016 ), p. 222-226 ISSN: 0925-9635 10.1016/j.diamond.2015.10.023 Helmer H. :Additive Fertigung durch Selektives Elektronenstrahlschmelzen der Nickelbasis Superlegierung IN718: Prozessfenster, Mikrostruktur und mechanische Eigenschaften 2016 )Helmer H. , Bauereiß A. , Singer R. , Körner C. :Erratum to: ‘Grain structure evolution in Inconel 718 during selective electron beam melting’ (Materials Science & Engineering A (2016) 668 (180–187 (S0921509316305536) (10.1016/j.msea.2016.05.046)) Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 2016 )ISSN: 0921-5093 10.1016/j.msea.2016.09.016 Helmer H. , Bauereiß A. , Singer R. , Körner C. :Grain structure evolution in Inconel 718 during selective electron beam melting Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 668 2016 ), p. 180-187 ISSN: 0921-5093 10.1016/j.msea.2016.05.046 Horke K. , Scherr R. , Meyer A. , Daenicke E. , Singer R. :Influence of Heat Treatment on Tensile, Fatigue and Creep Properties of Nickel-Base Superalloy IN 713LC Fabricated by Metal Injection Moulding World PM 2016 (Hamburg 9. October 2016 - 13. October 2016 )Huenert D. , Pröbstle M. , Casanova A. , Schlütter R. , Krakow R. , Büscher M. , Randelzhofer P. , Evans A. , Löhnert K. , Witulski T. , Neumeier S. , Rae CMF. :ATI718PLUS® - New nickel based disc alloy and its capability 13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs 11. September 2016 - 15. September 2016 )In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (ed.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016 10.1002/9781119075646.ch84 Jum'h I. , Abdelhay A. , Al-Ta'ani H. , Telfah A. , Alnaief M. , Rosiwal S. :Fabrication and application of boron doped diamond BDD electrode in olive mill wastewater treatment in Jordan Journal of Water Reuse and Desalination 7 2016 )ISSN: 2408-9370 10.2166/wrd.2016.062 Jüchter V. , Körner C. :Creep properties of Ti-48Al-2Cr-2Nb produced by selective electron beam melting 3rd Conference on Powder Processing Consolidation and Metallurgy of Titanium, 2015 (Lüneburg 31. August 2015 - 3. September 2015 )10.4028/www.scientific.net/KEM.704.190 Kachold F. :Zusammenhang von Prozess, Mikrostruktur, Eigenspannungen und Eigenschaften bei Aluminiumverbundwerkstoffen 2016 )Kachold F. , Kozera R. , Singer R. , Boczkowska A. :Mechanical Properties, Surface Structure, and Morphology of Carbon Fibers Pre-heated for Liquid Aluminum Infiltration Journal of Materials Engineering and Performance 25 2016 ), p. 1502-1507 ISSN: 1059-9495 10.1007/s11665-016-1997-4 Kachold F. , Singer R. :Mechanical Properties of Carbon Fiber-Reinforced Aluminum Manufactured by High-Pressure Die Casting Journal of Materials Engineering and Performance 25 2016 ), p. 3128-3133 ISSN: 1059-9495 10.1007/s11665-016-1974-y Köpf J. , Rai A. , Markl M. , Körner C. :3D Grain Structure Simulation for Beam-Based Additive Manufacturing 6th International Conference on Additive Technologies iCAT (Nürnberg 29. November 2017 - 30. November 2016 )In: Proceedings of the 6th International Conference on Additive Technologies iCAT 2016 2016 Körner C. :Additive manufacturing of metallic components by selective electron beam melting - A review International Materials Reviews 61 2016 ), p. 361-377 ISSN: 0308-4590 10.1080/09506608.2016.1176289 Körner C. , Ramsperger M. :Selective electron beam melting of the single crystalline nickel-base superalloy CMSX-4®: From columnar grains to a single crystal 13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs 11. September 2016 - 15. September 2016 )In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (ed.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016 10.1002/9781119075646.ch37 Kütemeyer M. , Schomer L. , Helmreich T. , Rosiwal S. , Koch D. :Fabrication of ultra high temperature ceramic matrix composites using a reactive melt infiltration process Journal of the European Ceramic Society 36 2016 ), p. 3647-3655 ISSN: 0955-2219 10.1016/j.jeurceramsoc.2016.04.039 Markl M. , Bauereiß A. , Rai A. , Körner C. :Numerical Investigations of Selective Electron Beam Melting on the Powder Scale Fraunhofer Direct Digital Manufacturing Conference 2016 (Berlin 16. March 2016 - 17. March 2016 )In: Proceedings of the Fraunhofer Direct Digital Manufacturing Conference 2016 2016 Markl M. , Körner C. :Multiscale Modeling of Powder Bed-Based Additive Manufacturing Annual Review of Materials Research 46 2016 ), p. 93-123 ISSN: 1531-7331 10.1146/annurev-matsci-070115-032158 Matuszewski K. :Precepetation of Topologically Close Packed Phases in Ni-base Superalloys - the Effect of Re and Ru 2016 )Meyer A. , Daenicke E. , Horke K. , Moor M. , Müller S. , Langer I. , Singer R. :Metal injection moulding of nickel-based superalloy CM247LC* Powder Metallurgy 59 2016 ), p. 51-56 ISSN: 1743-2901 10.1080/00325899.2016.1142058 Meyer A. , Recknagel C. , Klöden B. , Weissgärber T. , Müller S. , Langer I. , Horke K. , Kieback B. , Singer R. :Metal Injection Moulding of Iron-Base Oxide Dispersion Strengthened Alloys World PM 2016 (Hamburg 9. October 2016 - 13. October 2016 )Neumeier S. , Rehman HU. , Neuner J. , Zenk C. , Michel S. , Schuwalow S. , Rogal J. , Drautz R. , Göken M. :Diffusion of solutes in fcc Cobalt investigated by diffusion couples and first principles kinetic Monte Carlo Acta Materialia 106 2016 ), p. 304-312 ISSN: 1359-6454 10.1016/j.actamat.2016.01.028 Osmanlic F. , Körner C. :Lattice Boltzmann method for Oldroyd-B fluids Computers & Fluids 124 2016 ), p. 190-196 ISSN: 0045-7930 10.1016/j.compfluid.2015.08.004 Parsa AB. , Ramsperger M. , Kostka A. , Somsen C. , Körner C. , Eggeler G. :Transmission electron microscopy of a CMSX-4 Ni-base superalloy produced by selective electron beam melting Metals 6 2016 ), Article No.: 258 ISSN: 2075-4701 10.3390/met6110258 Plötz S. , Nowak R. , Lohmüller A. , Sobzcak N. , Singer R. :Wettability of Low Weight Borides by Commercial Aluminum Alloys − A Basis for Metal Matrix Composite Fabrication Advanced Engineering Materials 18 2016 ), p. 1884-1888 ISSN: 1438-1656 10.1002/adem.201600297 Pobel C. , Gotterbarm M. , Samfaß V. , Osmanlic F. , Körner C. :Innovative processing strategies for selective electron beam melting: Influence of scan line spacings on composition of Ti-6Al-4V and microstructure of IN718 6th International Conference on Additive Technologies iCAT 2016 (Nürnberg 29. November 2016 - 30. November 2016 )In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings of 6th International Conference on Additive Technologies , Ljubljana 2016 Pröbstle M. , Neumeier S. , Feldner P. , Rettig R. , Helmer H. , Singer R. , Göken M. :Improved creep strength of nickel-base superalloys by optimized γ/γ′ partitioning behavior of solid solution strengthening elements Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 2016 ), p. 411-420 ISSN: 0921-5093 10.1016/j.msea.2016.08.121 Raab S. , Guschlbauer R. , Lodes M. , Körner C. :Thermal and Electrical Conductivity of 99.9% Pure Copper Processed via Selective Electron Beam Melting Advanced Engineering Materials 18 2016 ), p. 1661-1666 ISSN: 1438-1656 10.1002/adem.201600078 Rai A. , Markl M. , Körner C. :A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing Computational Materials Science 124 2016 ), p. 37-48 ISSN: 0927-0256 10.1016/j.commatsci.2016.07.005 Ramsperger M. , Singer R. , Körner C. :Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 2016 ), p. 1469-1480 ISSN: 1073-5623 10.1007/s11661-015-3300-y Rettig R. , Matuszewski K. , Müller A. , Helmer H. , Ritter N. , Singer R. :Development of a low-density rhenium-free single crystal nickel-based superalloy by application of numerical multi-criteria optimization using thermodynamic calculations 13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs 11. September 2016 - 15. September 2016 )In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (ed.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016 10.1002/9781119075646.ch4 Ruttert B. , Ramsperger M. , Mujica Roncery L. , Lopez-Galilea I. , Körner C. , Theisen W. :Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting Materials and Design 110 2016 ), p. 720-727 ISSN: 0261-3069 10.1016/j.matdes.2016.08.041 Scharowsky T. :Grundlagenuntersuchungen zum selektiven Elektronenstrahlschmelzen von TiAl6V4 2016 )Schwankl M. :Al-Al-Verbundguss - Technologische Grundlagen und werkstoffkundliche Charakterisierung der stofflichen Anbindung von Aluminiumknetlegierungen im Aluminium-Druckguss 2016 )Schwankl M. , Wedler J. , Körner C. :Wrought Al - Cast Al compound casting based on zincate treatment for aluminum wrought alloy inserts Journal of Materials Processing Technology 238 2016 ), p. 160-168 ISSN: 0924-0136 10.1016/j.jmatprotec.2016.07.001 Schwieger W. , Thangaraj T. , Warmuth F. , Warnick KG. , Klumpp M. , Lodes M. , Körner C. :Fabrication and pressure drop behavior of novel monolithic structures with zeolitic architectures Chemical Engineering Journal 288 2016 ), p. 223-227 ISSN: 1385-8947 10.1016/j.cej.2015.11.104
2015
Bührer G. , Balzer A. , Arnold I. , Beier J. , Körner C. , Bleiziffer O. , Brandl A. , Weis C. , Horch RE. , Kneser U. , Arkudas A. :Combination of BMP2 and MSCs Significantly Increases Bone Formation in the Rat Arterio-Venous Loop Model Tissue Engineering - Part A 21(1-2) 2015 ), p. 96-105 ISSN: 1937-335X 10.1089/ten.tea.2014.0028 https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4293096/ Engenhorst M. , Fecher J. , Notthoff C. , Schierning G. , Schmechel R. , Rosiwal S. :Thermoelectric transport properties of boron-doped nanocrystalline diamond foils Carbon 81 2015 ), p. 650-662 ISSN: 0008-6223 10.1016/j.carbon.2014.10.002 Eydam A. , Suchanek G. , Schwankl M. , Gerlach G. , Singer R. , Körner C. :Evaluation of polarisation state of light metal embedded piezoelectrics Advances in Applied Ceramics 114 2015 ), p. 226-230 ISSN: 1743-6753 10.1179/1743676114Y.0000000222 Hartmann M. :Herstellung, Struktur und Eigenschaften syntaktischer Magnesiumschäume 2015 )Herbst K. :Elektrisch leitfähige Ti-O-C-Nanotubes mit hoher spezifischer Oberfläche 2015 )Hofmeister M. , Klein L. , Miran H. , Rettig R. , Virtanen S. , Singer R. :Corrosion behaviour of stainless steels and a single crystal superalloy in a ternary LiCl-KCl-CsCl molten salt Corrosion Science 90 2015 ), p. 46-53 ISSN: 0010-938X 10.1016/j.corsci.2014.09.009 Körner C. , Liebold Ribeiro Y. :A systematic approach to identify cellular auxetic materials Smart Materials and Structures 24 2015 ), Article No.: 025013 ISSN: 1361-665X 10.1088/0964-1726/24/2/025013 Körner C. , Warmuth F. :Phononic band gaps in 2D quadratic and 3D cubic cellular structures Materials 8 2015 ), p. 8327-8337 ISSN: 1996-1944 10.3390/ma8125463 Lodes M. , Guschlbauer R. , Körner C. :Process development for the manufacturing of 99.94% pure copper via selective electron beam melting Materials Letters 143 2015 ), p. 298-301 ISSN: 0167-577X 10.1016/j.matlet.2014.12.105 Lodes M. , Kachold F. , Rosiwal S. :Mechanical properties of micro- and nanocrystalline diamond foils Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences 373 2015 ), Article No.: 20140136 ISSN: 1364-503X 10.1098/rsta.2014.0136 Makarenko I. :Lebensdauerberechnung von Aluminium-Radialverdichterrädern 2015 )Markl M. :Numerische Modellierung und Simulation des selektiven Elektronenstrahlschmelzens basierend auf einer gekoppelten Gitter Boltzmann und Diskrete Element Methode 2015 )Markl M. , Ammer R. , Rüde U. , Körner C. :Numerical investigations on hatching process strategies for powder-bed-based additive manufacturing using an electron beam International Journal of Advanced Manufacturing Technology 78 2015 ), p. 239-247 ISSN: 0268-3768 10.1007/s00170-014-6594-9 http://link.springer.com/article/10.1007/s00170-014-6594-9 Markl M. , Körner C. :Free surface Neumann boundary condition for the advection-diffusion lattice Boltzmann method Journal of Computational Physics 301 2015 ), p. 230-246 ISSN: 0021-9991 10.1016/j.jcp.2015.08.033 Matuszewski K. , Müller A. , Ritter N. , Rettig R. , Kurzydłowski K. , Singer R. :On the Thermodynamics and Kinetics of TCP Phase Precipitation in Re- and Ru- Containing Ni-base Superalloys Advanced Engineering Materials 17 2015 ), p. 1127-1133 ISSN: 1438-1656 10.1002/adem.201500173 Matuszewski K. , Rettig R. , Matysiak H. , Peng Z. , Povstugar I. , Choi P. , Müller J. , Raabe D. , Spiecker E. , Kurzydlowski KJ. , Singer R. :Effect of ruthenium on the precipitation of topologically close packed phases in Ni-based superalloys of 3rd and 4th generation Acta Materialia 95 2015 ), p. 274-283 ISSN: 1359-6454 10.1016/j.actamat.2015.05.033 Meyer A. , Daenicke E. , Horke K. , Moor M. , Möller S. , Langer I. , Singer R. :Metal injection moulding of nickel-based superalloy CM247LC International Power Metallurgy Congress and Exhibition, Euro PM 2015 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85002806685&origin=inward Peng Z. , Povstugar I. , Matuszewski K. , Rettig R. , Singer R. , Kostka A. , Choi PP. , Raabe D. :Effects of Ru on elemental partitioning and precipitation of topologically close-packed phases in Ni-based superalloys Scripta Materialia 101 2015 ), p. 44-47 ISSN: 1359-6462 10.1016/j.scriptamat.2015.01.014 Peters W. , Eypasch M. , Frank T. , Schwerdtfeger J. , Körner C. , Bösmann A. , Wasserscheid P. :Efficient hydrogen release from perhydro-N-ethylcarbazole using catalyst-coated metallic structures produced by selective electron beam melting Energy and Environmental Science 8 2015 ), p. 641-649 ISSN: 1754-5692 10.1039/c4ee03461a Ramsperger M. , Mujica Roncery L. , Lopez-Galilea I. , Singer R. , Theisen W. , Körner C. :Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting Advanced Engineering Materials 17 2015 ), p. 1486-1493 ISSN: 1438-1656 10.1002/adem.201500037 Rettig R. , Ritter N. , Helmer H. , Neumeier S. , Singer R. :Single-crystal nickel-based superalloys developed by numerical multi-criteria optimization techniques: Design based on thermodynamic calculations and experimental validation Modelling and Simulation in Materials Science and Engineering 23 2015 ), Article No.: 035004 ISSN: 1361-651X 10.1088/0965-0393/23/3/035004 Rettig R. , Ritter N. , Müller F. , Franke M. , Singer R. :Optimization of the Homogenization Heat Treatment of Nickel-Based Superalloys Based on Phase-Field Simulations: Numerical Methods and Experimental Validation Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 46 2015 ), p. 5842-5855 ISSN: 1073-5623 10.1007/s11661-015-3130-y Scharowsky T. , Jüchter V. , Singer R. , Körner C. :Influence of the Scanning Strategy on the Microstructure and Mechanical Properties in Selective Electron Beam Melting of Ti-6Al-4V Advanced Engineering Materials 17 2015 ), p. 1573-1578 ISSN: 1438-1656 10.1002/adem.201400542 Schwankl M. , Kimme S. , Pohle C. , Drossel WG. , Körner C. :Active Vibration Damping in Structural Aluminum Die Castings via Piezoelectricity - Technology and Characterization Advanced Engineering Materials 17 2015 ), p. 969-975 ISSN: 1438-1656 10.1002/adem.201400367 Wedler J. , Schwankl M. , Körner C. :Al-Al-Verbundguss mit höherfesten Knetlegierungen Giesserei 102 2015 ), p. 46-53 ISSN: 0016-9765
2014
Ammer R. , Ljungblad U. , Markl M. , Körner C. , Rüde U. :Simulating fast electron beam melting with a parallel thermal free surface lattice Boltzmann method Computers & Mathematics with Applications 67 2014 ), p. 318-330 ISSN: 0898-1221 10.1016/j.camwa.2013.10.001 http://www.sciencedirect.com/science/article/pii/S0898122113005944 Ammer R. , Markl M. , Jüchter V. , Körner C. , Rüde U. :Validation Experiments for LBM Simulations of Electron Beam Melting International Journal of Modern Physics C 2014 ), p. 1-9 ISSN: 0129-1831 10.1142/S0129183114410095 http://arxiv.org/pdf/1402.2440.pdf Bauer M. , Schornbaum F. , Godenschwager C. , Markl M. , Anderl D. , Köstler H. , Rüde U. :A Python extension for the massively parallel framework waLBerla 4th Workshop on Python for High Performance and Scientific Computing (New Orleans 17. November 2014 - 17. November 2014 )In: online 2014 http://www.dlr.de/sc/Portaldata/15/Resources/dokumente/pyhpc2014/submissions/pyhpc2014_submission_5.pdf Bauereiß A. , Scharowsky T. , Körner C. :Defect generation and propagation mechanism during additive manufacturing by selective beam melting Journal of Materials Processing Technology 214 2014 ), p. 2522-2528 ISSN: 0924-0136 10.1016/j.jmatprotec.2014.05.002 Franke M. , Singer R. , Steinbach I. :Tertiary dendritic instability in late stage solidification of Ni-based superalloys Modelling and Simulation in Materials Science and Engineering 22 2014 )ISSN: 0965-0393 10.1088/0965-0393/22/2/025026 Fuchs B. :Salzkerntechnologie für Hohlgussbauteile im Druckguss 2014 )Fuchs B. , Körner C. :Mesh resolution consideration for the viability prediction of lost salt cores in the high pressure die casting process Progress in Computational Fluid Dynamics 14 2014 ), p. 24-30 ISSN: 1468-4349 10.1504/PCFD.2014.059197 Goudouri OM. , Kontonasaki E. , Chrissafis K. , Zinn K. , Hoppe A. , Detsch R. , Paraskevopoulos KM. , Boccaccini AR. :Towards the synthesis of an Mg-containing silicate glass-ceramic to be used as a scaffold for cementum/alveolar bone regeneration Ceramics International 40 2014 ), p. 16287-16298 ISSN: 0272-8842 10.1016/j.ceramint.2014.07.066 Hartmann J. , Blümel C. , Ernst S. , Fiegl T. , Wirth KE. , Körner C. :Aluminum integral foam castings with microcellular cores by nano-functionalization Journal of Materials Science 49 2014 ), p. 79-87 ISSN: 0022-2461 10.1007/s10853-013-7668-z Hartmann J. , Fiegl T. , Körner C. :Aluminum integral foams with tailored density profile by adapted blowing agents Applied Physics A: Materials Science and Processing 115 2014 ), p. 651-660 ISSN: 1432-0630 10.1007/s00339-014-8377-4 Helmer H. , Körner C. , Singer R. :Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure Journal of Materials Research 29 2014 ), p. 1987-1996 ISSN: 0884-2914 10.1557/jmr.2014.192 Horke K. , Daenicke E. , Schrüfer L. , Eichner T. , Langer I. , Singer R. :Influence of heat treatment on microstructure and mechanical properties of in 713LC fabricated by metal injection molding (MIM) 2014 World Congress on Powder Metallurgy and Particulate Materials, PM 2014 (Orlando 18. May 2014 - 22. May 2014 )https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84945954682&origin=inward Horke K. , Ruderer B. , Singer R. :Influence of sintering conditions on tensile and high cycle fatigue behaviour of powder injection moulded Ti-6Al-4V at ambient and elevated temperatures Powder Metallurgy 57 2014 ), p. 283-290 ISSN: 0032-5899 10.1179/1743290114Y.0000000102 Jüchter V. , Scharowsky T. , Singer R. , Körner C. :Processing window and evaporation phenomena for Ti-6Al-4V produced by selective electron beam melting Acta Materialia 76 2014 ), p. 252-258 ISSN: 1359-6454 10.1016/j.actamat.2014.05.037 Klassen A. , Bauereiß A. , Körner C. :Modelling of electron beam absorption in complex geometries Journal of Physics D-Applied Physics 47 2014 ), Article No.: 065307 ISSN: 0022-3727 10.1088/0022-3727/47/6/065307 Klassen A. , Scharowsky T. , Körner C. :Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods Journal of Physics D: Applied Physics 47 2014 ), Article No.: 275303 ISSN: 0022-3727 10.1088/0022-3727/47/27/275303 Klumpp M. , Inayat A. , Schwerdtfeger J. , Körner C. , Singer R. , Freund H. , Schwieger W. :Periodic open cellular structures with ideal cubic cell geometry: Effect of porosity and cell orientation on pressure drop behavior Chemical Engineering Journal 242 2014 ), p. 364-378 ISSN: 1385-8947 10.1016/j.cej.2013.12.060 Körner C. , Helmer H. , Bauereiß A. , Singer R. :Tailoring the grain structure of IN718 during selective electron beam melting 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens 10.1051/matecconf/20141408001 Körner C. , Schwankl M. , Himmler D. :Aluminum-aluminum compound castings by electroless deposited zinc layers Journal of Materials Processing Technology 214 2014 ), p. 1094-1101 ISSN: 0924-0136 10.1016/j.jmatprotec.2013.12.014 Liebold Ribeiro Y. , Körner C. :Phononic band gaps in periodic cellular materials Advanced Engineering Materials 16 2014 ), p. 328-334 ISSN: 1438-1656 10.1002/adem.201300064 Matuszewski K. , Rettig R. , Rasiński M. , Kurzydlowski KJ. , Singer R. :The Three-dimensional morphology of topologically close packed phases in a high rhenium containing nickel based superalloy Advanced Engineering Materials 16 2014 ), p. 171-175 ISSN: 1438-1656 10.1002/adem.201300198 Matuszewski K. , Rettig R. , Singer R. :The effect of Ru on precipitation of topologically close packed phases in Re-containing Ni base superalloys: Quantitative FIB-SEM investigation and 3D image modeling 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens 10.1051/matecconf/20141409001 Rettig R. , Singer R. :Fast interpolation algorithm for the calculation of thermodynamic property maps of microstructures Modelling and Simulation in Materials Science and Engineering 22 2014 ), p. 1-19 ISSN: 1361-651X 10.1088/0965-0393/22/8/085002 Scharowsky T. , Osmanlic F. , Körner C. , Singer R. :Melt pool dynamics during selective electron beam melting Applied Physics A-Materials Science & Processing 114 2014 ), p. 1303-1307 ISSN: 0947-8396 10.1007/s00339-013-7944-4 Schaub A. , Jüchter V. , Singer R. , Merklein M. :Characterization of hybrid components consisting of SEBM additive structures and sheet metal of alloy Ti-6Al-4V Key Engineering Materials 2014 ), p. 609-614 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.611-612.609 Schwankl M. , Rübner M. , Flössel M. , Gebhardt S. , Michaelis A. , Singer R. , Körner C. :Active functionality of piezoceramic modules integrated in aluminum high pressure die castings Sensors and Actuators A-Physical 207 2014 ), p. 84-90 ISSN: 0924-4247 10.1016/j.sna.2013.12.016 Schwerdtfeger J. , Körner C. :Selective electron beam melting of Ti-48Al-2Nb-2Cr: Microstructure and aluminium loss Intermetallics 49 2014 ), p. 29-35 ISSN: 0966-9795 10.1016/j.intermet.2014.01.004 Steuer S. , Singer R. :Suppression of boride formation in transient liquid phase bonding of pairings of parent superalloy materials with different compositions and grain structures and resulting mechanical properties Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 45 2014 ), p. 3545-3553 ISSN: 1073-5623 10.1007/s11661-014-2304-3
2013
Ballmes H. :Aluminiummatrix-Verbundwerkstoffe im Druckgießprozess - Verfahrensgrundlagen und Produkteigenschaften 2013 )Franke M. :Auswirkungen der Legierungszusammensetzung auf die Morphologie und die Festigkeit des Dendritennetzwerkes bei der gerichteten Erstarrung von Nickelbasis-Superlegierungen 2013 )Franke M. , Hilbinger RM. , Lohmüller A. , Singer R. :The effect of liquid metal cooling on thermal gradients in directional solidification of superalloys: Thermal analysis Journal of Materials Processing Technology 213 2013 ), p. 2081-2088 ISSN: 0924-0136 10.1016/j.jmatprotec.2013.06.001 Fuchs B. , Eibisch H. , Körner C. :Core viability simulation for salt core technology in high-pressure die casting International Journal of Metalcasting 7 2013 ), p. 39-45 ISSN: 1939-5981 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84882430468&origin=inward Hilbinger RM. , Köpf J. , Rübner M. , Singer R. :Automatische Optimierung der Kolbenvorlaufgeschwindigkeit beim Druckgiessen durch numerische Simulation Giesserei 100 2013 ), p. 36-42 ISSN: 0016-9765 Horke K. , Singer R. :High Cycle Fatigue of Titanium fabricated by Metal Injection Moulding (MIM) International Powder Metallurgy Congress and Exhibition, Euro PM 2013 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84924939544&origin=inward Hrabe NW. , Heinl P. , Bordia RK. , Körner C. , Fernandes RJ. :Maintenance of a bone collagen phenotype by osteoblast-like cells in 3D periodic porous titanium (Ti-6Al-4 V) structures fabricated by selective electron beam melting Connective Tissue Research 54 2013 ), p. 351-360 ISSN: 0300-8207 10.3109/03008207.2013.822864 Kachold F. , Lodes M. , Rosiwal S. , Singer R. :Direct measurement of Young's modulus, fracture strength and fracture toughness of nanocrystalline diamond foil by means of tensile testing Acta Materialia 61 2013 ), p. 7000-7008 ISSN: 1359-6454 10.1016/j.actamat.2013.08.014 Kömpel N. :Mikrostruktur und Warmfestigkeit von Mg-Al- und Mg-Al-Sr-Legierungen bei Verarbeitung im Spritzguss 2013 )Körner C. , Bauereiß A. , Attar E. :Fundamental consolidation mechanisms during selective beam melting of powders Modelling and Simulation in Materials Science and Engineering 21 2013 ), Article No.: 085011 ISSN: 0965-0393 10.1088/0965-0393/21/8/085011 Lodes M. :Nanokristalline Diamantfolie: Herstellung und Eigenschaften 2013 )Lodes M. , Sailer S. , Rosiwal S. , Singer R. :Adhesive bonding and brazing of nanocrystalline diamond foil onto different substrate materials Applied Surface Science 282 2013 ), p. 335-341 ISSN: 0169-4332 10.1016/j.apsusc.2013.05.129 Markl M. , Ammer R. , Ljungblad U. , Rüde U. , Körner C. :Electron beam absorption algorithms for electron beam melting processes simulated by a three-dimensional thermal free surface lattice Boltzmann method in a distributed and parallel environment Procedia Computer Science 18 2013 ), p. 2127-2136 ISSN: 1877-0509 10.1016/j.procs.2013.05.383 http://www.sciencedirect.com/science/article/pii/S1877050913005267 Metzler P. , von Wilmowsky C. , Stadlinger B. , Zemann W. , Schlegel K. , Rosiwal S. , Rupprecht S. :Nano-crystalline diamond-coated titanium dental implants - A histomorphometric study in adult domestic pigs Journal of Cranio-Maxillofacial Surgery 41 2013 ), p. 532-538 ISSN: 1010-5182 10.1016/j.jcms.2012.11.020 Neuerer K. :Beeinflussung der Titankarbid-Schichtdicke bei der HFCDV-Diamantbeschichtung von Titan durch Oberfächenvorbehandlung und Variation der Beschichtungsparameter 2013 )Rübner M. :Verfahrenstechnische und werkstoffkundliche Grundlagen zur vollständigen Integration aktiver Komponenten in Druckgussbauteile 2013 )Schaub A. , Merklein M. , Jüchter V. , Singer R. , Körner C. :Funktionsintegration durch die Kombination additiver Fertigungsprozesse mit der Blechumformung 2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung In: Drummer, D. (ed.): 2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2013 Schwankl M. , Eydam A. , Rübner M. , Suchanek G. , Gerlach G. :A simple thermal wave method for the evaluation of the polarization state of embedded piezoceramics Ceramics International 39 2013 ), p. 587-590 ISSN: 0272-8842 10.1016/j.ceramint.2012.10.141 Schwankl M. , Kellner R. , Singer R. , Körner C. :The influence of sandblasting on the morphology of electroless deposited zinclayers on aluminum sheets Applied Surface Science 283 2013 ), p. 202-208 ISSN: 0169-4332 10.1016/j.apsusc.2013.06.082 Schwankl M. , Rübner M. , Singer R. , Körner C. :Integration of PZT-ceramic modules using hybrid structures in high pressure die casting 10.1016/j.mspro.2013.02.020 Singer R. , Sommer M. , Kellermann K. :Production of mesophase carbon by PIM - Tailoring gel strength of agar binder Powder Technology 237 2013 ), p. 228-232 ISSN: 0032-5910 10.1016/j.powtec.2013.01.004 Singer R. , Steuer S. :Boride Zone Formation in Transient Liquid Phase Bonding of Pairings of Parent Superalloy Materials with Different Compositions and Grain Structures Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 44A 2013 ), p. 2226-2232 ISSN: 1073-5623 10.1007/s11661-012-1597-3 Sobolewski S. , Lodes M. , Rosiwal S. , Singer R. :Surface energy of growth and seeding side of free standing nanocrystalline diamond foils Surface & Coatings Technology 232 2013 ), p. 640-644 ISSN: 0257-8972 10.1016/j.surfcoat.2013.06.051 Uhlmann E. , Langmack M. , Fecher J. , Rosiwal S. , Singer R. :Using boron doped diamond foils for fabrication of micro cavities with EDM 13th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2013 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84908155805&origin=inward Wieding J. , Fritsche A. , Heinl P. , Körner C. , Matthias C. , Seitz H. , Mittelmeier W. , Bader R. :Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions Journal of Applied Biomaterials and Fundamental Materials 11 2013 ), p. 159-166 ISSN: 2280-8000 10.5301/JABFM.2013.10832
2012
Arkudas A. , Galyna P. , Beier J. , Weigel L. , Körner C. , Singer R. , Bleiziffer O. , Polykandriotis E. , Horch RE. , Kneser U. :Combination of extrinsic and intrinsic pathways significantly accelerates axial vascularization of bioartificial tissues Plastic and Reconstructive Surgery 129 2012 ), p. 55e-65e ISSN: 0032-1052 10.1097/PRS.0b013e3182361f97 Bauer A. , Neumeier S. , Pyczak F. , Singer R. , Göken M. :Creep properties of different γ'-strengthened Co-base superalloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 550 2012 ), p. 333-341 ISSN: 0921-5093 10.1016/j.msea.2012.04.083 Heckl A. , Cenanovic S. , Göken M. , Singer R. :Discontinuous precipitation and phase stability in Re- and Ru-containing nickel-base superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 2012 ), p. 10-19 ISSN: 1073-5623 10.1007/s11661-011-0833-6 Hilbinger RM. , Köpf J. , Rübner M. , Singer R. :Computational optimisation of plunger movement during slow shot phase in high pressure diecasting Foundry Trade Journal International 186 2012 ), p. 291-294 ISSN: 1758-9789 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84870726107&origin=inward Klassen A. , Rübner M. , Ilg J. , Rupitsch S. , Lerch R. , Singer R. , Körner C. :Influence of the fabrication process on the functionality of piezoceramic patch transducers embedded in aluminum die castings Smart Materials & Structures 21 2012 )ISSN: 0964-1726 10.1088/0964-1726/21/11/115014 Knorr T. , Heinl P. , Schwerdtfeger J. , Körner C. , Singer R. , Etzold B. :Process specific catalyst supports-Selective electron beam melted cellular metal structures coated with microporous carbon Chemical Engineering Journal 2012 ), p. 725-733 ISSN: 1385-8947 10.1016/j.cej.2011.10.009 Li Q. , Turhan CM. , Rottmair CA. , Singer R. , Virtanen S. :Influence of MWCNT dispersion on corrosion behaviour of their Mg composites Materials and Corrosion - Werkstoffe und Korrosion 63 2012 ), p. 384-387 ISSN: 0043-2822 10.1002/maco.201006023 Makarenko I. , Lehmayr B. , Bogner M. , Klaus M. , Singer R. :Thermomechanical behaviour of turbocharger compressor wheels ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012 (Copenhagen 10.1115/GT2012-69041 Rettig R. , Singer R. :Influence of Ruthenium on topologically closed packed phase precipitation in single-crystal Ni-based superalloys: numerical experiments and validation 112th International Symposium on Superalloys, SUPERALLOYS 2012 (Seven Springs 9. September 2012 - 13. September 2012 )In: E. S. Huron, R. C. Reed, M. C. Hardy, M. J. Mills, R. E. Montero, P. Dolabella Portella, J. Telesman (ed.): Superalloys 2012: Proceedings of the 12th Intenational Symposium of Superalloys 2012 Scharowsky T. , Bauereiß A. , Singer R. , Körner C. :Observation and numerical simulation of melt pool dynamic and beam powder interaction during selective electron beam melting 23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012 (Austin, TX https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84889688177&origin=inward Schwerdtfeger J. , Schury F. , Stingl M. , Wein F. , Singer R. , Körner C. :Mechanical characterisation of a periodic auxetic structure produced by SEBM physica status solidi (b) 249 2012 ), p. 1347-1352 ISSN: 0370-1972 10.1002/pssb.201084211 Schwerdtfeger J. , Singer R. , Körner C. :In situ flaw detection by IR-imaging during electron beam melting Rapid Prototyping Journal 18 2012 ), p. 259-263 ISSN: 1355-2546 10.1108/13552541211231572 Singer R. :Leichtbau ist schwer Akademie aktuell 42 2012 ), p. 12-14 ISSN: 1436-753X https://www.badw.de/die-akademie/presse/zeitschrift-akademie-aktuell/einzelartikel-aa/detail/akademie-aktuell-jahrgang-2012-ausgabe-nr-42.html Sommer M. , Kellermann K. , Singer R. :Powder injection moulding of mesophase graphite European International Powder Metallurgy Congress and Exhibition, Euro PM 2012 (Basel https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84902309967&origin=inward Steuer S. :Diffusionslöten von Mischverbindungen aus ein- und stängelkristallinen Nickelbasis-Superlegierungen: Ausscheidungsvorgänge in den Grundmaterialien 2012 )Wang L. , Pyczak F. , Zhang J. , Lou LH. , Singer R. :Effect of eutectics on plastic deformation and subsequent recrystallization in the single crystal nickel base superalloy CMSX-4 Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 532 2012 ), p. 487-492 ISSN: 0921-5093 10.1016/j.msea.2011.11.015
2011
Attar E. :Simulation of Selective Electron Beam Melting Process 2011 )Attar E. , Körner C. :Lattice Boltzmann model for thermal free surface flows with liquid-solid phase transition International Journal of Heat and Fluid Flow 32 2011 ), p. 156-163 ISSN: 0142-727X 10.1016/j.ijheatfluidflow.2010.09.006 Franke M. , Hilbinger RM. , Heckl A. , Singer R. :Effect of thermophysical properties and processing conditions on primary dendrite arm spacing of nickel-base superalloys - Numerical approach Gießereiforschung 278 2011 ), p. 156-161 ISSN: 0046-5933 10.4028/www.scientific.net/AMR.278.156 Franke M. , Hilbinger RM. , Konrad C. , Glatzel U. , Singer R. :Numerical determination of secondary dendrite arm spacing for IN738LC investment castings Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 42 2011 ), p. 1847-1853 ISSN: 1073-5623 10.1007/s11661-010-0585-8 Hartmann J. , Trepper A. , Körner C. :Aluminum integral foams with near-microcellular structure Advanced Engineering Materials 13 2011 ), p. 1050-1055 ISSN: 1438-1656 10.1002/adem.201100035 Heckl A. :Auswirkungen von Rhenium und Ruthenium auf die Mikrostruktur und Hochtemperaturfestigkeit von Nickel-Basis Superlegierungen unter Berücksichtigung der Phasenstabilität 2011 )Heckl A. , Neumeier S. , Cenanovic S. , Göken M. , Singer R. :Reasons for the enhanced phase stability of Ru-containing nickel-based superalloys Acta Materialia 59 2011 ), p. 6563-6573 ISSN: 1359-6454 10.1016/j.actamat.2011.07.002 Heckl A. , Neumeier S. , Göken M. , Singer R. :The effect of Re and Ru on γ/γ′ microstructure, γ-solid solution strengthening and creep strength in nickel-base superalloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 2011 ), p. 3435-3444 ISSN: 0921-5093 10.1016/j.msea.2011.01.023 Heckl A. , Rettig R. , Singer R. :Creep rupture strength of Re and Ru containing experimental nickel-base superalloys Advanced Materials Research 278 2011 ), p. 339-344 ISSN: 1022-6680 10.4028/www.scientific.net/AMR.278.339 Hilbinger RM. , Lohmüller A. , Köpf J. , Singer R. :Predicting defects and material quality in castings by means of computational determination of flow length values International Journal of Cast Metals Research 24 2011 ), p. 96-101 ISSN: 1364-0461 10.1179/1743133610Y.0000000005 Hrabe NW. , Heinl P. , Flinn B. , Körner C. , Bordia RK. :Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V) Journal of Biomedical Materials Research Part B-Applied Biomaterials 2011 ), p. 313-320 ISSN: 1552-4973 10.1002/jbm.b.31901 Inayat A. , Schwerdtfeger J. , Freund H. , Körner C. , Singer R. , Schwieger W. , Freund H. :Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing Chemical Engineering Science 66 2011 ), p. 2758-2763 ISSN: 0009-2509 10.1016/j.ces.2011.03.031 Kellermann K. :Eigenspannungen in Mehrschichtaufbauten aus Diamant und Chromkarbid auf Vergütungsstählen 2011 )Kellermann K. , Fandrey J. , Rosiwal S. , Singer R. :CVD-Diamond Coating as Wear Protection for Standard Heat-Treatable Steel International Symposium on Friction, Wear and Wear Protection 2008 (Aachen 10.1002/9783527628513.ch30 Klassen A. , Rübner M. , Ilg J. , Rupitsch S. , Lerch R. , Körner C. , Singer R. :Integration of piezoceramic sensors and actuators into structural components via high pressure die casting In: R. Neugebauer (ed.): Proceedings of the CRC/TR39 3rd Scientific Symposium "Integration of Active Functions into Structural Elements" , Chemnitz 2011 Körner C. , Attar E. , Heinl P. :Mesoscopic simulation of selective beam melting processes Journal of Materials Processing Technology 211 2011 ), p. 978-987 ISSN: 0924-0136 10.1016/j.jmatprotec.2010.12.016 Li Q. , Keitel H. , Singer R. :Magnesium Composites Reinforced by Metal Coated Carbon Nanotubes Carbon 2011 (Shanghai 25. July 2011 - 29. July 2011 )Li Q. , Singer R. :Graphene Based Light Metal Composites Carbon 2011 (Shanghai 25. July 2011 - 29. July 2011 )Lodes M. , Hartmaier A. , Göken M. , Durst K. :Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations Acta Materialia 59 2011 ), p. 4264-4273 ISSN: 1359-6454 10.1016/j.actamat.2011.03.050 Löhnert K. :Einfluss der thermomechanischen Vorbehandlung auf die Eigenschaften der Nickelbasissuperlegierung A718Plus 2011 )Mitschke H. , Schwerdtfeger J. , Schury F. , Stingl M. , Körner C. , Singer R. , Robins V. , Mecke K. , Schröder-Turk G. :Erratum: Finding auxetic frameworks in periodic tessellations Advanced Materials 23 2011 ), p. 2669-2674 ISSN: 0935-9648 10.1002/adma.201190118 Mitschke H. , Schwerdtfeger J. , Schury F. , Stingl M. , Körner C. , Singer R. , Robins V. , Mecke K. , Schröder-Turk G. :Finding Auxetic Frameworks in Periodic Tessellations Advanced Materials 23 2011 ), p. 2669-2674 ISSN: 0935-9648 10.1002/adma.201100268 Ramakrishnan R. , Lodes M. , Rosiwal S. , Singer R. :Self-supporting nanocrystalline diamond foils: Influence of template morphologies on the mechanical properties measured by ball on three balls testing Acta Materialia 59 2011 ), p. 3343-3351 ISSN: 1359-6454 10.1016/j.actamat.2011.02.009 Rauber C. :Partikelverstärkte Magnesiumlegierungen durch Compoundieren und Spritzgießen - Herstellung, Mikrostruktur, Eigenschaften 2011 )Rauber C. , Lohmüller A. , Opel S. , Singer R. :Microstructure and mechanical properties of SiC particle reinforced magnesium composites processed by injection molding Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 2011 ), p. 6313-6323 ISSN: 0921-5093 10.1016/j.msea.2011.04.088 Rettig R. , Heckl A. , Singer R. :Modeling of precipitation kinetics of TCP-phases in single crystal nickel-base superalloys Advanced Materials Research 278 2011 ), p. 180-185 ISSN: 1022-6680 10.4028/www.scientific.net/AMR.278.180 Rettig R. , Singer R. :Numerical modelling of precipitation of topologically close-packed phases in nickel-base superalloys Acta Materialia 59 2011 ), p. 317-327 ISSN: 1359-6454 10.1016/j.actamat.2010.09.035 Rettig R. , Steuer S. , Singer R. :Diffusion of germanium in binary and multicomponent nickel alloys Journal of Phase Equilibria and Diffusion 32 2011 ), p. 198-205 ISSN: 1547-7037 10.1007/s11669-011-9853-6 Ahmed F., Bayerlein K., Rosiwal S., Göken M., Durst K.:Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling Acta Materialia 59 2011 ), p. 5422-5433 ISSN: 1359-6454 10.1016/j.actamat.2011.05.015
Rübner M. , Günzl M. , Körner C. , Singer R. :Aluminium-aluminium compound fabrication by high pressure die casting Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 2011 ), p. 7024-7029 ISSN: 0921-5093 10.1016/j.msea.2011.05.076 Rübner M. , Klassen A. , Körner C. , Singer R. , Ilg J. , Rupitsch S. , Lerch R. :Dünnwandige Aluminiumdruckgussteile mit integrierten piezokeramischen Sensoren und Aktoren - Fertigung und Charakterisierung 18. Symposium Verbundwerkstoffe und Werkstoffverbunde (Chemnitz In: B. Wielage (ed.): Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde 2011 Schaef W. , Marx M. , Vehoff H. , Heckl A. , Randelzhofer P. :A 3-D view on the mechanisms of short fatigue cracks interacting with grain boundaries Acta Materialia 59 2011 ), p. 1849-1861 ISSN: 1359-6454 10.1016/j.actamat.2010.11.051 Schwerdtfeger J. , Wein F. , Leugering G. , Singer R. , Körner C. , Stingl M. , Schury F. :Design of Auxetic Structures via Mathematical Optimization Advanced Materials 23 2011 ), p. 2650--2654 ISSN: 0935-9648 10.1002/adma.201004090 Steuer S. , Piegert S. , Frommherz M. , Singer R. , Scholz A. :Transient liquid phase bonding of pairings of parent superalloy material with different composition and grain structure In: Advanced Materials Research 278 2011 10.4028/www.scientific.net/AMR.278.454 Turhan CM. , Li Q. , Jha H. , Singer R. , Virtanen S. :Corrosion behaviour of multiwall carbon nanotube/magnesium composites in 3.5% NaCl Electrochimica Acta 56 2011 ), p. 7141-7148 ISSN: 0013-4686 10.1016/j.electacta.2011.05.082 Uhlmann E. , Langmack M. , Garn R. , Oberschmidt D. , Fecher J. , Rosiwal S. , Singer R. :Using diamond coated tool-electrodes for drilling micro holes with EDM 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84908255357&origin=inward
2010
Ballmes H. , Klassen A. , Rottmair CA. , Singer R. :Carbon long fiber reinforced aluminum matrix composites - Parameter studies and numerical simulations of the infiltration process Advanced Engineering Materials 12 2010 ), p. 577-583 ISSN: 1438-1656 10.1002/adem.200900316 Brandt B. , Durst K. , Belli R. , Göken M. , Lohbauer U. :Fracture toughness of GIC—A mechanistic approach on the nanoscale Dental Materials 26 2010 ), p. e32 ISSN: 0109-5641 10.1016/j.dental.2010.08.076 Foreta M. :Langzeitstabile Diamantelektroden auf Titansubstrat 2010 )Heckl A. , Rettig R. , Cenanovic S. , Göken M. , Singer R. :Investigation of the final stages of solidification and eutectic phase formation in Re and Ru containing nickel-base superalloys Journal of Crystal Growth 312 2010 ), p. 2137-2144 ISSN: 0022-0248 10.1016/j.jcrysgro.2010.03.041 Heckl A. , Rettig R. , Singer R. :Solidification Characteristics and Segregation Behavior of Nickel-Base Superalloys in Dependence on Different Rhenium and Ruthenium Contents Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 41A 2010 ), p. 202-211 ISSN: 1073-5623 10.1007/s11661-009-0076-y Kellermann K. , Erhardt S. , Fandrey J. , Rosiwal S. , Singer R. :Influence of surface roughness on the tribological properties of HF-CVD diamond coated heat-treatable steel Wear 269 2010 ), p. 811-815 ISSN: 0043-1648 10.1016/j.wear.2010.08.009 Körner C. , Hartmann J. :Aluminiumgussteile mit zellularem Kern Lightweight Design 2010 ), p. 28-34 ISSN: 1865-4819 10.1007/BF03223614 Li Q. , Rottmair CA. , Singer R. :CNT reinforced light metal composites produced by melt stirring and by high pressure die casting Composites Science and Technology 70 2010 ), p. 2242-2247 ISSN: 0266-3538 10.1016/j.compscitech.2010.05.024 Lodes M. , Rosiwal S. , Singer R. :Self-supporting nanocrystalline diamond foils - A new concept for crystalline diamond on any technical surface Key Engineering Materials 438 2010 ), p. 163-169 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.438.163 Lohbauer U. , Pelka M. , Belli R. , Schmitt J. , Mocker E. , Jandt KD. , Müller F. :Degree of conversion of luting resins around ceramic inlays in natural deep cavities: A micro-raman spectroscopy analysis Operative Dentistry 35 2010 ), p. 579-586 ISSN: 0361-7734 10.2341/10-012-L Ponader S. , von Wilmowsky C. , Widenmayer M. , Lutz R. , Heinl P. , Körner C. , Singer R. , Nkenke E. , Neukam FW. , Schlegel K. :In vivo performance of selective electron beam-melted Ti-6Al-4V structures Journal of Biomedical Materials Research Part A 92 2010 ), p. 56-62 ISSN: 1549-3296 10.1002/jbm.a.32337 Rettig R. :Mathematische Modellierung der Ausscheidung von Sprödphasen in komplexen rutheniumhaltigen Nickelbasis-Superlegierungen 2010 )Schwerdtfeger J. , Heinl P. , Singer R. , Körner C. :Auxetic cellular structures through selective electron-beam melting physica status solidi (b) 247 2010 ), p. 269-272 ISSN: 0370-1972 10.1002/pssb.200945513 Schwerdtfeger J. , Nadgorny E. , Koutsos V. , Blackford JR. , Zaiser M. :Statistical heterogeneity of plastic deformation: An investigation based on surface profilometry Acta Materialia 58 2010 ), p. 4859-4870 ISSN: 1359-6454 10.1016/j.actamat.2010.05.024 Trepper A. :Niederdruck-Integralschaumgießen - Technologie für Aluminiumgussteile mit reduziertem Körperschall 2010 )Uhlmann E. , Rosiwal S. , Bayerlein K. , Röhner M. :Influence of grain size on the wear behavior of CVD diamond coatings in micro-EDM International Journal of Advanced Manufacturing Technology 47 2010 ), p. 919-922 ISSN: 0268-3768 10.1007/s00170-009-2131-7 Uhlmann E. , Röhner M. , Rosiwal S. , Domingos D. :Influence of coatings in micro-EDM 16th International Symposium on Electromachining, ISEM 2010 (Shanghai https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84883897735&origin=inward Wiehler H. :Prozessentwicklung des Hochdruckintegralschaumgießens von Aluminium 2010 )
2009
Ahmed F. , Durst K. , Rosiwal S. , Fandrey J. , Schaufler J. , Göken M. :In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy Surface & Coatings Technology 204 2009 ), p. 1022-1025 ISSN: 0257-8972 10.1016/j.surfcoat.2009.04.030 Attar E. , Körner C. :Lattice Boltzmann method for dynamic wetting problems Journal of Colloid and Interface Science 335 2009 ), p. 84-93 ISSN: 0021-9797 10.1016/j.jcis.2009.02.055 Ballmes H. , Rottmair CA. , Singer R. :Herstellung von Kohlenstofflangfaser-Aluminiumverbunden im Druckguss 17. Symposium Verbundwerkstoffe und Werkstoffverbunde (Bayreuth In: Walter Krenkel (ed.): Verbundwerkstoffe: 17. Symposium Verbundwerkstoffe und Werkstoffverbunde , Weinheim 2009 Jenning R. :Rheologisches Verhalten teilerstarrter Metalllegierungen 2009 )Konorsa R. :Langzeitbeanspruchung von Aluminium-Fahrwerkskomponenten unter erhöhter Temperatur 2009 )Kramer M. , Jenning R. , Lohmüller A. , Hilbinger RM. , Randelzhofer P. , Singer R. :Characterization of magnesium alloys for semi solid processing 8th International Conference of Magnesium Alloys and their Applications (Weimar 26. October 2009 - 29. October 2009 )In: K. U. Kainer (ed.): Magnesium: 8th International Conference on Magnesium Alloys and their Applications , Wiley-VCH 2009 Kömpel N. , Lohmüller A. , Krause A. , Singer R. :Comparison of conventional magnesium alloys with Mg-Al-Ca-Zn and Mg-Al-Sr-Zn alloys processed by injection molding 8th International Conference on Magnesium Alloys and their Applications (Weimar Körner C. , Attar E. :Numerical Simulation of Foam Solidification Phenomena MetFoam 2009 (Bratislava In: MetFoam 2009 - Proceedings of the 6th Interational Conference on Porous Matals and Metallic Foams 2009 Körner C. , Schwerdtfeger J. , Singer R. :Auxetic Cellular Metals MetFoam 2009 - 6th International Conference on Porous Metals and Metallic foams (Bratislava 2. September 2009 - 4. September 2009 )In: MetFoam 2009 - Proceedings of the 6th International Conference on Porous Metals and Metallic Foams 2009 Li Q. , Rottmair CA. , Singer R. :Fabrication of Carbon Nanotube/Magnesium Alloy Composites by Melt Stirring 8th International Conference on Magnesium Alloys and their Applications 2009 (Weimar Li Q. , Viereckl A. , Rottmair CA. , Singer R. :Improved processing of carbon nanotube/magnesium alloy composites Composites Science and Technology 69 2009 ), p. 1193-1199 ISSN: 0266-3538 10.1016/j.compscitech.2009.02.020 Rauber C. , Lohmüller A. , Hilbinger RM. , Opel S. , Hartmann M. , Singer R. :Herstellung von partikelverstärkten Verbundwerkstoffen durch Magnesiumspritzgießen 17. Symposium Verbundwerkstoffe und Werkstoffverbunde (Bayreuth Rettig R. , Heckl A. , Neumeier S. , Pyczak F. , Göken M. , Singer R. :Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys Defect and Diffusion Forum 289-292 2009 ), p. 101-108 ISSN: 1012-0386 10.4028/www.scientific.net/DDF.289-292.101 Rottmair CA. , Gruhl M. , Winter R. , Singer R. :Properties of powder injection molded graphite for tribological applications Advanced Engineering Materials 11 2009 ), p. 346-349 ISSN: 1438-1656 10.1002/adem.200800320 Rottmair CA. , Li Q. , Singer R. :Prospects and limitations of carbon-nanotube reinforced metals CARBON 2009 (Biarritz In: Proceedings of the CARBON 2009 Conference 2009 Rübner M. , Körner C. , Singer R. :Die castings with integrated PZT-modules - fabrication and functionalities Tagungsband IV ECCOMAS Thematic Conference on Smart Structures and Materials (Porto 13. July 2009 - 15. July 2009 )Rübner M. , Körner C. , Singer R. :Integration piezokeramischer Module in dünnwandige Aluminiumbauteile mittels Druckguss 2. Wissenschaftliches Symposium Transregio-PT-PIESA (Dresden In: R. Neugebauer (ed.): Großserienfähige Produktionstechnologien fuer leichtmetall- und faserverbundbasierte Komponenten mit integrierten Piezosensoren und -aktoren 2009 Schwerdtfeger J. , Heinl P. , Singer R. , Körner C. :Selective Electron Beam Melting: A new way to auxetic cellular structures 20th Annual International Solid Freeform Fabrication Symposium, SFF 2009 (Austin, TX https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84892631091&origin=inward Sommer M. , Rottmair CA. , Singer R. :Net-Shape Processing of Graphite via Powder Injection Molding of Mesophase Carbon with Tailored Binder Strength CARBON 2009 (Biarritz In: Proceedings of the CARBON 2009 Conference 2009 Sommer M. , Rottmair CA. , Singer R. :Optimizing Mechanical Properties of Injection Moulded Graphite Parts using a Two Phase Mesophase Carbon Powder System CARBON 2009 (Biarritz In: Proceedings of the CARBON 2009 Conference 2009 Stadelmann C. :Extrusion von Metallpulvern durch kontinuierliches Strangpressen 2009 )Wang L. , Pyczak F. , Zhang J. , Singer R. :On the role of eutectics during recrystallization in a single crystal nickel-base superalloy - CMSX-4 International Journal of Materials Research 100 2009 ), p. 1046-1051 ISSN: 1862-5282 10.3139/146.110155
2008
Bechmann F. , Kohnhäuser M. , Saager C. , Kröninger HR. , Dörnhöfer A. , Rauber C. , Lohmüller A. , Hilbinger RM. :Partikelverstärkung von Magnesiumgussbauteilen ATZ - Automobiltechnische Zeitschrift 110 2008 ), p. 864-871 ISSN: 0001-2785 Bräutigam V. :Gießtechnische Integration piezokeramischer Module in Aluminiumdruckgussbauteile 2008 )Derfuß B. :Entbinderungsverhalten beim Pulverspritzguss mit Mesophasenkohlenstoff und wasserlöslichen Bindersystemen 2008 )Derfuß B. , Gruhl M. , Rottmair CA. , Volek A. , Singer R. :Net-shape production of graphite parts via powder injection moulding of carbon mesophase Journal of Materials Processing Technology 208 2008 ), p. 444-449 ISSN: 0924-0136 10.1016/j.jmatprotec.2008.01.019 Dinkel M. , Heinz P. , Pyczak F. , Volek A. , Ott M. , Affeldt E. , Vossberg A. , Göken M. , Singer R. :New boron and silicon free single crystal-diffusion brazing alloys 11th International Symposium on Superalloys, SUPERALLOYS 2008 (Seven Springs 14. September 2008 - 18. September 2008 )In: R.C. Reed, K.A. Kenneth, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, S.A. Woodard (ed.): Superalloys 2008: Proceedings of the 11th Intenational Symposium of Superalloys , Warrendale 2008 10.7449/2008/Superalloys_2008_211_220 Eibisch H. , Lohmüller A. , Kömpel N. , Singer R. :Effect of solidification microstructure and Ca additions on creep strength of magnesium alloy AZ91 processed by Thixomolding International Journal of Materials Research 99 2008 ), p. 56-66 ISSN: 1862-5282 10.3139/146.101604 Heinl P. , Körner C. , Singer R. :Mechanically Adapted Cellular Titanium for Bone Substitution International Symposium on Cellular Metals for Structural and Functional Applications 2008 (Dresden Heinl P. , Körner C. , Singer R. :Selective electron beam melting - A novel generative manufacturing technique for cellular titanium 5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549129261&origin=inward Heinl P. , Körner C. , Singer R. :Selective electron beam melting of cellular titanium: Mechanical properties Advanced Engineering Materials 10 2008 ), p. 882-888 ISSN: 1438-1656 10.1002/adem.200800137 Heinl P. , Müller L. , Körner C. , Singer R. , Müller F. :Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting Acta Biomaterialia 4 2008 ), p. 1536-1544 ISSN: 1742-7061 10.1016/j.actbio.2008.03.013 Heinz P. :Diffusionslöten von einkristallinen Nickelbasis Superlegierungen mit binären Nickel-Germanium-Lotwerkstoffen 2008 )Heinz P. , Volek A. , Singer R. , Dinkel M. , Pyczak F. , Göken M. , Ott M. , Affeldt E. , Vossberg A. :Diffusion brazing of single crystalline nickel base superalloys using boron free nickel base braze alloys Defect and Diffusion Forum 273-276 2008 ), p. 294-299 ISSN: 1012-0386 Hirmke J. , Rosiwal S. , Singer R. :Monitoring oxygen species in diamond hot-filament CVD by zircon dioxide sensors Vacuum 82 2008 ), p. 599-607 ISSN: 0042-207X 10.1016/j.vacuum.2007.09.002 Ibrahim A. , Körner C. , Singer R. :The effect of TiH2 particle size on the morphology of Al-foam produced by PM process Advanced Engineering Materials 10 2008 ), p. 845-848 ISSN: 1438-1656 10.1002/adem.200800139 Kellermann K. , Bareiss C. , Rosiwal S. , Singer R. :Well adherent diamond coatings on steel substrates Advanced Engineering Materials 10 2008 ), p. 657-660 ISSN: 1438-1656 10.1002/adem.200800060 Konorsa R. , Staeves J. , Singer R. :Langeitbeanspruchung unter erhöhter Temperatur von Fahrwerkskomponenten aus einer Aluminium-Magnesium-Legierung Aluminium 84 2008 ), p. 74-78 ISSN: 0002-6689 Körner C. :Foam formation mechanisms in particle suspensions applied to metal foams Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 495 2008 ), p. 227-235 ISSN: 0921-5093 10.1016/j.msea.2007.09.089 Körner C. :Integral Foam Molding of Light Metals Springer 2008 ISBN: 978-3-540-68838-9 Li Q. , Rottmair CA. , Singer R. :Fabrication of carbon nanotube reinforced aluminum alloy composites by high pressure die casting CARBON 2008 (Nango In: Proceedings of the CARBON 2008 Conference 2008 Li Q. , Rottmair CA. , Singer R. :Synthesis and characterization of carbon nanotube/magnesium alloy composites well dispersed by using a block copolymer CARBON 2008 (Nango In: Proceedings of the CARBON 2008 Conference 2008 Perle M. :Grundsatzuntersuchungen zum Einsatz von diamantbeschichteten Siliziumkarbid-Gleitringen im Trockenlauf 2008 )Ponader S. , Vairaktaris E. , Heinl P. , von Wilmowsky C. , Rottmair A. , Körner C. , Singer R. , Holst S. , Schlegel K. , Neukam FW. , Nkenke E. :Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts Journal of Biomedical Materials Research Part A 84 2008 ), p. 1111-1119 ISSN: 1549-3296 10.1002/jbm.a.31540 Rottmair CA. , Gruhl M. , Winter R. , Singer R. :Powder Injection molded Graphite for tribological applications CARBON 2008 (Nango In: Proceedings of the CARBON 2008 Conference 2008 Rübner M. , Körner C. , Singer R. :Integration of piezoceramic modules into die castings - Procedure and functionalities 3rd International Conference on Smart Materials, Structures and Systems - Emboding Intelligence in Structures and Integrated Systems, CIMTEC 2008 (Acireale, Sicily https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=62449124626&origin=inward Scharrer M. :Thixospritzgießen von Magnesiumlegierungen - Gefüge und mechanische Eigenschaften 2008 )Solórzano E. , Hirschmann M. , Rodriguez-Perez M. , Körner C. , de Saja JA. :Thermal conductivity of AZ91 magnesium integral foams measured by the Transient Plane Source method Materials Letters 62 2008 ), p. 3960-3962 ISSN: 0167-577X 10.1016/j.matlet.2008.05.020 Trepper A. , Körner C. , Singer R. :Reduced Structure Borne Sound of Integral Foam Components 11th International Conference on Aluminium Alloys 2008 In: J. Hirsch, B. Skrotzki, G. Gottstein (ed.): Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys 2008 , Weinheim 2008 Trepper A. , Körner C. , Singer R. :Structural damping of integral foam components 5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549119075&origin=inward Volek A. , Lohmüller A. , Bräutigam V. , Grimm M. , Hilbinger RM. , Hartmann M. , Otten H. , Singer R. :Approaching series production of light weight components by Magnesium Injection Molding 16th Magnesium Automotive and User Seminar (Aalen 18. September 2008 - 19. September 2008 )Wiehler H. , Heinl P. , Körner C. , Singer R. :High pressure integral foam moulding of aluminium 5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549084215&origin=inward Wiehler H. , Körner C. , Singer R. :High pressure integral foam moulding of aluminium - Process technology Advanced Engineering Materials 10 2008 ), p. 171-178 ISSN: 1438-1656 10.1002/adem.200700267
2007
Bechmann F. , Fallböhmer P. , Stauber R. , Rauber C. , Lohmüller A. , Hartmann M. , Singer R. :Reinforced Light Metals for Automotive Applications SAE International 2007 World Congress (Detroit 16. April 2007 - 19. April 2007 )Bräutigam V. , Körner C. , Singer R. , Kaltenbacher M. , Meiler M. , Lerch R. :Smart structural components by integration of sensor/actuator-modules in die castings Industrial and Commercial Applications of Smart Structures Technologies 2007 (San Diego, CA 10.1117/12.705831 Bräutigam V. , Rübner M. , Körner C. , Singer R. :Druckgießtechnische Integration von piezokeramischen Modulen in Aluminiumbauteile 1. Wissenschaftlichen Kolloquium des SFB/Transregio PT-PIESA Glaser A. :Chemische Gasphaseninfiltration poröser Substrate mit Diamant 2007 )Gruhl M. , Rottmair CA. , Derfuß B. , Singer R. :Net-Shape Processing of Graphite with Tailored Porosity via Powder Injection Molding of Mesophase Carbon CARBON 2007 (Seattle In: Proceedings of the CARBON 2007 Conference 2007 Heinl P. , Rottmair A. , Körner C. , Singer R. :Cellular titanium by selective electron beam melting Advanced Engineering Materials 9 2007 ), p. 360-364 ISSN: 1438-1656 10.1002/adem.200700025 Hirmke J. :Diamantabscheidung im Heißdraht CVD Verfahren: Wachstum von Einzelkristallen und Gasphasencharakterisierung 2007 )Hirmke J. , Glaser A. , Hempel F. , Stancu GD. , Röpcke J. , Rosiwal S. , Singer R. :Improved flow conditions in diamond hot filament CVD-Promising deposition results and gas phase characterization by laser absorption spectroscopy Vacuum 81 2007 ), p. 619-626 ISSN: 0042-207X 10.1016/j.vacuum.2006.08.004 Hirschmann M. :Herstellung und Eigenschaften von spritzgegossenen Magnesium-Integralschäumen 2007 )Hirschmann M. , Körner C. , Singer R. :Integral foam molding - A new process for foamed magnesium castings 5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 (Vancouver In: Materials Science Forum 2007 Lamm M. :Einfluss der Erstarrungsbedingungen auf die mechanischen Eigenschaften von einkristallinen Superlegierungewn bei großen Wandstärken 2007 )Lohmüller A. , Scharrer M. , Jenning R. , Rauber C. , Loos M. , Kömpel N. , Hilbinger RM. , Hartmann M. , Singer R. :Advances in Magnesium Thixomolding 15th Automotive and User Seminar (Aalen 27. October 2007 - 28. October 2007 )In: 15th Automotive and User Seminar 2007 Rottmair CA. :Einfluss der thermischen Prozessführung auf die Eigenschaften von Graphitformteilen, hergestellt durch Pulverspritzguss von Mesophasen-Kohlenstoff 2007 )Rottmair CA. , Gruhl M. , Derfuß B. , Volek A. , Singer R. :On the Sintering of Powder Injection Molded Mesophase Carbon CARBON 2007 (Seattle In: Proceedings of the CARBON 2007 Conference 2007 Schade A. :Reibung und Verschleiß von CVD-Diamantschichten in trockenen flächigen Gleitkontakten 2007 )Schade A. , Rosiwal S. , Singer R. :Influence of surface topography of HF-CVD diamond films on self-mated planar sliding contacts in dry environments Surface & Coatings Technology 201 2007 ), p. 6197-6205 ISSN: 0257-8972 10.1016/j.surfcoat.2006.11.024 Singer R. , Lamm M. :The effect of casting conditions on the high-cycle fatigue properties of the single-crystal nickel-base superalloy PWA 1483 Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38A 2007 ), p. 1177-1183 ISSN: 1073-5623 10.1007/s11661-007-9188-4 Singer R. , Scharrer M. , Lohmüller A. :Advances in magnesium injection molding (Thixomolding) Magnesium Technology 2007 (Orlando 25. February 2007 - 1. March 2007 )In: R. S. Beals, A. A. Luo, N. R. Neelameggham, M. O. Pekguleryuz (ed.): Magnesium Technology 2007 2007 Zhou Y. , Volek A. :Effect of dendrite arm spacing on castability of a directionally solidified nickel alloy Scripta Materialia 56 2007 ), p. 537-540 ISSN: 1359-6462 10.1016/j.scriptamat.2006.11.002 Zhou Y. , Volek A. :Influence of solidification conditions on grain boundary cohesion in the mushy zone during directional solidification of nickel base superalloy Materials Science and Technology 23 2007 ), p. 297-302 ISSN: 0267-0836 10.1179/174328407X158703
2006
Bareiss C. , Hackl G. , Popovska N. , Rosiwal S. , Singer R. :CVD diamond coating of steel on a CVD-TiBN interlayer Surface & Coatings Technology 201 2006 ), p. 718-723 ISSN: 0257-8972 10.1016/j.surfcoat.2005.12.035 Bareiss C. , Perle M. , Rosiwal S. , Singer R. :Diamond coating of steel at high temperatures in hot filament chemical vapour deposition (HFCVD) employing chromium interlayers Diamond and Related Materials 15 2006 ), p. 754-760 ISSN: 0925-9635 10.1016/j.diamond.2005.10.053 Bräutigam V. , Schellack T. , Körner C. , Singer R. :Optimized fixing technique for the integration of piezoceramic moduls in die castings Gießereiforschung 58 2006 ), p. 1-6 ISSN: 0046-5933 Bräutigam V. , Wierach P. , Körner C. , Singer R. :Integration of piezoceramic modules in die castings - a new production technology 10th Adaptronic Congress (Göttingen 3. May 2006 - 4. May 2006 )Derfuß B. , Gruhl M. , Rottmair CA. , Volek A. , Singer R. :A novel route towards graphite products via powder injection moulding of carbon mesophase using a partially water-soluble binder system CARBON 2006 (Aberdeen 16. July 2006 - 21. July 2006 )In: Proceedings of the CARBON 2006 Conference 2006 Eibisch H. , Lohmüller A. , Scharrer M. , Singer R. :Effective alloy development using Thixomolding focussing on improved creep strength of AZ91 7th International Conference on Magnesium Alloys and their Applications (Dresden 6. November 2006 - 9. November 2006 )In: K. U. Kainer (ed.): Proceedings of the 7th International Conference on Magnesium Alloys and their Applications , Weinheim 2006 Glaser A. , Jentsch HG. , Rosiwal S. , Lüdtke A. , Singer R. :Deposition of uniform and well adhesive diamond layers on planar tungsten copper substrates for heat spreading applications Materials Science and Engineering B-Advanced Functional Solid-State Materials 127 2006 ), p. 186-192 ISSN: 0921-5107 10.1016/j.mseb.2005.10.018 Glaser A. , Rosiwal S. , Singer R. :Chemical vapor infiltration (CVI) - Part II: Infiltration of porous substrates with diamond by using a new designed hot-filament plant Diamond and Related Materials 15 2006 ), p. 49-54 ISSN: 0925-9635 10.1016/j.diamond.2005.07.010 Gruhl M. , Derfuß B. , Rottmair CA. , Volek A. , Singer R. :Powder Injection Moulding (PIM) of Mesophase Carbon with Water-based Binders Advances in Science and Technology 45 2006 ), p. 771-713 ISSN: 1662-8969 Hirmke J. , Hempel F. , Stancu GD. , Röpcke J. , Rosiwal S. , Singer R. :Gas-phase characterization in diamond hot-filament CVD by infrared tunable diode laser absorption spectroscopy Vacuum 80 2006 ), p. 967-976 ISSN: 0042-207X 10.1016/j.vacuum.2005.12.009 Hirmke J. , Schwarz S. , Rottmair CA. , Rosiwal S. , Singer R. :Diamond single crystal growth in hot filament CVD Diamond and Related Materials 15 2006 ), p. 536-541 ISSN: 0925-9635 10.1016/j.diamond.2006.01.003 Hördler M. :Phasengrenzreaktion im Fest-Flüssig-System Nickel/Zinn 2006 )Körner C. , Hirschmann M. , Wiehler H. :Integral foam moulding of light metals Materials Transactions 47 2006 ), p. 2188-2194 ISSN: 1345-9678 10.2320/matertrans.47.2188 Körner C. , Hirschmann M. , Wiehler H. , Trepper A. , Singer R. :Integralschaumgießen von Leichtmetallen Industriekolloquium 2006 des SFB 396 Lamm M. , Volek A. , Lüsebrink O. , Singer R. :Influence of solidification conditions on homogenisation heat treatment and mechanical properties in single crystal nickel-base superalloys Materials for Advanced Power Engineering (Liege Perle M. , Bareiss C. , Rosiwal S. , Singer R. :Generation and oxidation of wear debris in dry running tests of diamond coated SiC bearings Diamond and Related Materials 15 2006 ), p. 749-753 ISSN: 0925-9635 10.1016/j.diamond.2005.10.069 Rottmair CA. , Bauer J. , Gruhl M. , Volek A. , Singer R. :Influence of pressure and heating rate on the mechanical properties of Mesophase based sintered parts Advances in Science and Technology 45 2006 ), p. 584-589 ISSN: 1662-8969 Schade A. , Rosiwal S. , Singer R. :Tribological behaviour of and fibre textured CVD diamond films under dry planar sliding contact Diamond and Related Materials 15 2006 ), p. 1682-1688 ISSN: 0925-9635 10.1016/j.diamond.2006.02.008 Scharrer M. , Lohmüller A. , Hilbinger RM. , Eibisch H. , Jenning R. , Hartmann M. , Singer R. :Advances in Magnesium Injection Molding (Thixomolding) 7th International Conference Magnesium Alloys and Their Applications (Dresden 6. November 2006 - 9. November 2006 )In: K. U. Kainer (ed.): Proc. of 7th International Conference Magnesium Alloys and Their Applications 2006 Schreiber K. , Löhnert K. , Singer R. :Opportunities and Challenges for the New Nickel Base Alloy 718Plus Second Symposium on Recent Advantages of Nb-Containing Materials in Europe Thürey N. , Pohl T. , Rüde U. , Oechsner M. , Körner C. :Optimization and Stabilization of LBM Free Surface FlowSimulations using Adaptive Parameterization Computers & Fluids 35 2006 ), p. 934-939 ISSN: 0045-7930 http://www.sciencedirect.com/science/article/pii/S004579300500157X/pdfft?md5=59701b54104d0daae6791fd1b2140ffa&pid=1-s2.0-S004579300500157X-main.pdf Volek A. , Singer R. , Bürgel R. , Grossmann J. , Wang Y. :Influence of topologically closed packed phase formation on creep rupture life of directionally solidified nickel-base superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 37 2006 ), p. 405-410 ISSN: 1073-5623 10.1007/s11661-006-0011-4 Zhou Y. , Volek A. :Effect of grain boundary fraction on castability of a directionally solidified nickel alloy Scripta Materialia 54 2006 ), p. 2169-2174 ISSN: 1359-6462 10.1016/j.scriptamat.2006.02.032 Zhou Y. , Volek A. , Singer R. :Effect of grain boundary characteristics on hot tearing in directional solidification of superalloys Journal of Materials Research 21 2006 ), p. 2361-2370 ISSN: 0884-2914 10.1557/jmr.2006.0284
2005
Bräutigam V. , Körner C. , Singer R. :Herstellungsverfahren für druckgegossene multifunktionale Verbundbauteile Giesserei 92 2005 ), p. 46-49 ISSN: 0016-9765 Eibisch H. , Lohmüller A. , Scharrer M. , Jenning R. , Hilbinger RM. , Singer R. :Neue Entwicklungen beim Thixospritzgießen von Magnesiumlegierungen In: Elsbeth Wendler-Kalsch (ed.): Zukunftsorientierter Einsatz von Magnesium im Verkehrswesen Expert 2005 , p. 74-86 (Haus der Technik Fachbuch, Vol.59)ISBN: 978-3-8169-2540-8 Eibisch H. , Singer R. :Infiltration von Kohlenstofflangfaserpreformen mit Magnesium im Druckguss 15. Symposium Verbundwerkstoffe und Werkstoffverbunde (Kassel Euteneuer T. , Körner C. , Singer R. :Magnesium-Keramik-Durchdringungswerkstoffe: Einfluss der Morphologie der keramischen Verstärkungsphase 15. Symposiums Verbundwerkstoffe und Werkstoffverbunde (Kassel In: M. Schlimmer (ed.): Verbundwerkstoffe und Werkstoffverbunde 2005: Vortragstexte des 15. Symposiums Verbundwerkstoffe und Werkstoffverbunde 2005 Glaser A. , Jentsch HG. , Rosiwal S. , Lüdtke A. , Singer R. :Uniform diamond coatings on planar tungsten copper substrates for heat spreading applications 16th Internationales Plansee Seminar 2005 (Reutte In: 16th Internationales Plansee Seminar 2005 Proceedings, Powder Metallurgical High Performance Materials, Vol. 1 2005 Hilbinger RM. , Köpf J. , Lohmüller A. , Scharrer M. , Hartmann M. , Singer R. :Vermeidung von Gussfehlern - Prognose von Eigenschaften durch Modellierung Druckguss 2/2005 2005 ), p. 59-64 ISSN: 1619-2478 Hirschmann M. , Körner C. , Singer R. :Injection Moulding of Magnesium Integral Foams International Symposium on Cellular Metals and Polymers (Fürth In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers , Zürich 2005 Hirschmann M. , Körner C. , Singer R. :Integralschäume aus Magnesiumlegierungen Gießereiforschung 57 2005 ), p. 8-14 ISSN: 0046-5933 Hirschmann M. , Wiehler H. , Körner C. , Singer R. :Light metal integral foam - a promising material for structural applications CELLMET 2005 (Dresden In: G. Stephani, B. Kieback (ed.): Proceedings of the International Symposium on Cellular metals for Structural and Functional Applications 2005 2005 Ibrahim A. :Effect on Material and Processing Parameters on the Morphology of Aluminium Foams Produced by the PM Route 2005 )Ibrahim A. , Körner C. , Singer R. :Investigation of Micropore Creation on the PM-foam Mophology International Symposium on Cellular Metals and Polymers (Fürth In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers , Zürich 2005 Körner C. , Arnold M. , Singer R. :Metal foam stabilization by oxide network particles Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 396 2005 ), p. 28-40 ISSN: 0921-5093 10.1016/j.msea.2005.01.001 Körner C. , Pohl T. , Rüde U. , Thürey N. , Hofmann T. :FreeWIHR: Lattice Boltzmann Methods with Free Surfaces and their Application in Material Technology KONWIHR Results Workshop (Garching In: High Performance Computing in Science and Engineering, Garching 2004 , Berlin/Heidelberg 2005 Körner C. , Pohl T. , Rüde U. , Thürey N. , Zeiser T. :Parallel Lattice Boltzmann Methods for CFD Applications In: Numerical Solution of Partial Differential Equations on Parallel Computers New York Springer 2005 , p. 439-465 (Lecture Notes in Computational Science and Engineering, Vol.51)ISBN: 3-540-29076-1 https://www10.informatik.uni-erlangen.de/Publications/Papers/2005/LBMCFD_LNCSE51.pdf Körner C. , Thies M. , Hofmann T. , Thürey N. , Rüde U. :Lattice Boltzmann Model for Free Surface Flow for Modeling Foaming Journal of Statistical Physics 121 2005 ), p. 179-196 ISSN: 0022-4715 10.1007/s10955-005-8879-8 http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.321.499&rep=rep1&type=pdf Lohmüller A. , Scharrer M. , Hilbinger RM. , Jenning R. , Hartmann M. , Singer R. :Thixospritzgiessen von Magnesiumlegierungen Gießereiforschung 57 2005 ), p. 2-9 ISSN: 0046-5933 Oechsner M. , Thies M. , Arnold M. , Körner C. , Singer R. :Simulation of Metal Foam Formation with the Lattice Boltzmann Method International Symposium on Cellular Metals and Polymers (Fürth In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers , Zürich 2005 Quadbeck P. :Herstellung und Eigenschaften von Superlegierungen mit zellularem Gefügeaufbau 2005 )Rupprecht S. , Bloch-Birkholz A. , Lethaus B. , Rosiwal S. , Neukam FW. , Schlegel A. :The bone-metal interface of defect and press-fit ingrowth of microwave plasma-chemical vapor deposition implants in the rabbit model Clinical Oral Implants Research 16 2005 ), p. 98-104 ISSN: 0905-7161 10.1111/j.1600-0501.2004.01079.x Singer R. , Körner C. , Altstädt V. , Münstedt H. :Cellular Metals and Polymers Zürich Trans Tech Publications LTD 2005 ISBN: 0-87849-941-x Thies M. :Modellierung des Schaumbildungsprozesses von Metallen mit Hilfe der Lattice-Boltzmann-Methode 2005 )Thürey N. , Rüde U. , Körner C. :Interactive Free Surface Fluids with the Lattice Boltzmann Method 2005 ), p. 10 https://www10.cs.fau.de/publications/reports/TechRep_2005-04.pdf Volek A. , Pyczak F. , Singer R. , Mughrabi H. :Partitioning of Re between γ and γ′ phase in nickel-base superalloys Scripta Materialia 52 2005 ), p. 141-145 ISSN: 1359-6462 10.1016/j.scriptamat.2004.09.013 Zhou Y. , Volek A. , Singer R. :Influence of solidification conditions on the castability of nickel-base superalloy IN792 Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 36 2005 ), p. 651-656 ISSN: 1073-5623 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=16244365528&origin=inward van Geldern M. :Herstellung von hochschmelzenden Metallmatrix-Verbundwerkstoffen durch Schleudergießen 2005 )
2004
Aumüller B. :Herstellung und Eigenschaften thermisch gespritzter Formkörper für Anwendungen im Motorbau 2004 )Bürgel R. , Grossmann J. , Lüsebrink O. , Mughrabi H. , Pyczak F. , Singer R. , Volek A. :Development of a new alloy for directional solidification of large industrial gas turbine blades SUPERALLOYS 2004 - Tenth International Symposium on Superalloys (Champion, PA Eibisch H. , Hartmann M. , Singer R. :Herstellung und Eigenschaften von Kohlenstofflangfaser verstärktem Magnesium im Druckguss 3. Ranshofer Leichtmetalltage 2004 (Ranshofen 23. June 2004 - 25. June 2004 )Glaser A. , Rosiwal S. , Freels B. , Singer R. :Chemical vapor infiltration (CVI)-Part I: A new technique to achieve diamond composites Diamond and Related Materials 13 2004 ), p. 834-838 ISSN: 0925-9635 10.1016/j.diamond.2003.10.041 Hilbinger RM. , Singer R. :Prozeßsimulation für den Druckguss Druckguss 1/2004 2004 ), p. 43-46 ISSN: 1619-2478 Hirschmann M. , Lamm M. , Körner C. , Singer R. :Magnesium Integral Foams: Production and Properties 6th International Conference Magnesium Alloys and Their Applications (Wolfsburg In: K. U. Kainer (ed.): Proceedings of the 6th International Conference Magnesium Alloys and Their Applications , Weinheim 2004 Körner C. , Hirschmann M. , Bräutigam V. , Singer R. :Endogenous particle stabilization during magnesium integral foam production Advanced Engineering Materials 6 2004 ), p. 385-390 ISSN: 1438-1656 10.1002/adem.200405147 Körner C. , Pohl T. , Rüde U. , Thürey N. , Hofmann T. :FreeWiHR --- LBM with Free Surfaces 2004 ), p. 15 https://www10.cs.fau.de/publications/reports/TechRep_2004-06.pdf Körner C. , Thies M. :Foaming of Light Metals: Mechanisms and Numerical Modelling 3rd International Conference "Computational Modeling and Simulation of Materials" (Acireale In: P. Vincenzini (ed.): Advances in Science and Technology Vol. 43, Proceeding of the 3rd Conference "Computational Modeling and Simulation of Materials, Part B" 2004 Lohmüller A. , Scharrer M. , Jenning R. , Hilbinger RM. , Hartmann M. , Singer R. :Injection Molding of Magnesium Alloys In: Proceedings of the 6th International Conference Magnesium Alloys and Their Applications , Weinheim 2004 Quadbeck P. , Kaschta J. , Singer R. :Superalloy IN625 with cellular microstructure - Fabrication route and mechanical properties Advanced Engineering Materials 6 2004 )ISSN: 1438-1656 10.1002/adem.200400054 Schade A. , Perle M. , Rosiwal S. , Singer R. :Micro structured CVD diamond coated sliding bearings for improved tribological performance under dry running conditions Materialwissenschaft und Werkstofftechnik 35 2004 ), p. 929-935 ISSN: 0933-5137 10.1002/mawe.200400831 Schwarz S. , Rottmair CA. , Hirmke J. , Rosiwal S. , Singer R. :CVD-diamond single-crystal growth Journal of Crystal Growth 271 2004 ), p. 425-434 ISSN: 0022-0248 10.1016/j.jcrysgro.2004.08.003 http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TJ6-4DN2F3G-2&_user=616145&_coverDate=11%2F15%2F2004&_alid=882231821&_rdoc=5&_fmt=high&_orig=search&_cdi=5302&_sort=d&_docanchor=&view=c&_ct=5&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=aab768e5088b5cd3b830778b911906c1 Volek A. , Singer R. :Influence of solidification conditions on TCP phase formation, casting porosity and high temperature mechanical properties in a Re-containing nickel-base superalloy with columnar grain structure 10th International Symposium on Superalloys, SUPERALLOYS 2004 (Seven Springs 19. September 2004 - 23. September 2004 )In: K. Green, H. Harada, T.E. Howson, T.M. Pollock, R.C. Reed, J.J. Schirra, S. Walston (ed.): Superalloys 2004: Proceedings of the 10th Intenational Symposium of Superalloys 2004 10.7449/2004/Superalloys_2004_713_718 Zhang H. :Untersuchungen zum Einfluss rascher Erwärmung auf das Anschmelzen der Korngrenzen und die mechanischen Eigenschaften in metallischen Werkstoffen 2004 )Zhang J. , Singer R. :Effect of Grain-Boundary Characteristics on Castability of Nickel-Base Superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2004 ), p. 939-946 ISSN: 1073-5623 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=1842815219&origin=inward Zhang J. , Singer R. :Effect of Zr and B on castability of Ni-based superalloy IN792 Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2004 ), p. 1337-1342 ISSN: 1073-5623 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=2442706791&origin=inward
2003
Arnold M. , Körner C. , Singer R. :PM aluminium foams: Stabilizing mechanisms and optimization MetFoam 2003 (Berlin 23. June 2003 - 25. June 2003 )In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Foaming Technology , Berlin 2003 Brunnbauer M. , Hirschmann M. , Körner C. , Singer R. :Gießtechnische Herstellung von Leichtmetallbauteilen mit zellularem Kern In: M. Geiger, G. W. Ehrenstein (ed.): Robuste, verkürzte Prozessketten für flächige Leichtbauteile Bamberg Meisenbach-Verlag 2003 , p. 57-69 Brunnbauer M. , Körner C. , Singer R. :Encasing of aluminium foam with magnesium by die casting MetFoam 2003 (Berlin 23. June 2003 - 25. June 2003 )In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Metal Foaming Technology , Berlin 2003 Glaser A. , Rosiwal S. , Singer R. :Herstellung neuartiger Substratwerkstoffe durch Infiltration mit Diamant aus der Gasphase 14. Symposium Verbundwerkstoffe und Werkstoffverbunde Heinrich F. :Leichtbauverbundstrukturen durch Umgießen von Aluminiumschaumkernen im Druckguss 2003 )Körner C. , Hirschmann M. , Lamm M. , Singer R. :Magnesium integral foams MetFoam 2003 (Berlin 23. June 2003 - 25. June 2003 )In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Metal Foaming Technology , Berlin 2003 Rüde U. , Thürey N. , Körner C. , Pohl T. :Simulation von Metallschaum mittels der Lattice-Boltzmann Methode 35 2003 ), p. 4-8 Schwarz S. :Physikalische Grundlagen der technischen Diamantabscheidung im Heißdraht-CVD-Verfahren 2003 )Schwarz S. , Rosiwal S. , Musayev Y. , Singer R. :High temperature diffusion chromizing as a successful method for CVD-diamond coating of steel Part II Diamond and Related Materials 12 2003 ), p. 701-706 ISSN: 0925-9635 Singer R. , Körner C. , Rosiwal S. :From New Materials to Finished Components - Metals Research at the WTM institute of the University of Erlangen-Nuernberg In: Maschinenbau in Bayern 2003 2003 , p. 46-49 Ströhla S. , Winter W. , Kuhn G. , Brunnbauer M. , Hirschmann M. , Körner C. , Singer R. , Dörfler SM. , Otto A. :Metallschaumverbundstrukturen - Prozesstechnologie und werkstoffmechanische Analyse Robuste verkürzte Prozessketten für flächige Leichtbauteile (Erlangen In: Robuste verkürzte Prozessketten für flächige Leichtbauteile, Industriekolloquium 2003 des SFB 396 , Bamberg 2003
2002
Altes A. , Heiderhoff R. , Balk LJ. , Jentsch HG. , Rosiwal S. :Comparison of thermal conductivities on abraded and untreated CVD-Diamond obtained by scanning thermal microscopy International Journal of Modern Physics B 16 2002 ), p. 922-926 ISSN: 0217-9792 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0037139065&origin=inward Körner C. , Heinrich F. , Singer R. :Encasing by Casting In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals München Wiley-VCH 2002 , p. 103-113 ISBN: 3-527-30339-1 Körner C. , Ottmüller M. , Singer R. , Popovska N. , Schmidt S. , Gerhard H. :Optimierung von Kohlenstofflangfaser/AZ91 Verbunden durch eine pyroC/TiN-Doppelbeschichtung Verbundwerkstoffe und Werkstoffverbunde (Chemnitz 5. September 2001 - 7. September 2001 )In: B. Wielage, G. Leonhardt (ed.): Verbundwerkstoffe und Werkstoffverbunde , Chemnitz 2002 http://www.wileyeurope.com/cda/product/0,,3527303197,00.html Körner C. , Singer R. :Foaming Processes for Aluminum In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals München Wiley-VCH 2002 , p. 8-14 ISBN: 3-527-30339-1 Körner C. , Singer R. :The Physics of Foaming: Structure Formation and Stability In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals München Wiley-VCH 2002 , p. 33-43 ISBN: 3-527-30339-1 Körner C. , Thies M. , Singer R. :Modeling of metal foaming with lattice Boltzmann automata Advanced Engineering Materials 4 2002 ), p. 765-769 ISSN: 1438-1656 10.1002/1527-2648(20021014)4:103.0.CO;2-M Leuchtenberger D., Fischer Ingrid, Eitschberger M.,:Mädchen + Technik Praktikum 2001: Technisch-Naturwissenschaftliches Schnupperpraktikum für Schülerinnen 2002 )
Lohmüller A. :Gerichtete Erstarrung mittels Flüssigmetallkühlung - Verfahrensoptimierung und Parametereinflüsse 2002 )Olurin O. , Arnold M. , Körner C. , Singer R. :The investigation of morphometric parameters of aluminium foams using micro-computed tomography Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 328 2002 ), p. 334-343 ISSN: 0921-5093 10.1016/S0921-5093(01)01809-3 Rupprecht S. , Bloch-Birkholz A. , Rosiwal S. , Neukam FW. , Wiltfang J. :Examination of the Bone-Metal Interface of Titanium Implants Coated by the Microwave Plasma Chemical Vapor Deposition Method International Journal of Oral & Maxillofacial Implants 17 2002 ), p. 778-785 ISSN: 0882-2786 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0036834274&origin=inward Schwarz S. , Musayev Y. , Rosiwal S. , Schaufler C. , Singer R. , Meerkamm H. :High temperature diffusion chromizing as a sucsessful method for CVD-diamond coating of steel Diamond and Related Materials 2002 ), p. 757-762 ISSN: 0925-9635 http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TWV-44VGB6Y-7&_user=616145&_coverDate=06%2F30%2F2002&_alid=61213825&_rdoc=6&_fmt=summary&_orig=search&_cdi=5572&_sort=d&_st=4&_docanchor=&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=b570dd5ffcb188afd2838a21b782f347 Schwarz S. , Rosiwal S. , Frank M. , Breidt D. , Singer R. :Dependence of the growth rate, quality and morphology of diamond coatings on the pressure during the CVD-process in an industrial hot-filament plant Diamond and Related Materials 2002 ), p. 589-595 ISSN: 0925-9635 10.1016/S0925-9635(01)00702-6 http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6WW2-46922JT-2R&_user=616145&_coverDate=07%2F15%2F2002&_alid=61213825&_rdoc=4&_fmt=summary&_orig=search&_cdi=7118&_sort=d&_st=4&_docanchor=&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=96e19a3f085215738b5c6e838997cee5 Volek A. :Erstarrungsmikrostruktur und Hochtemperatureigenschaften rheniumhaltiger, stängelkristalliner Nickel-Basis-Superlegierungen 2002 )Zeiler E. , Schwarz S. , Rosiwal S. , Singer R. :Structural changes of tungsten heating filaments during CVD of diamond Materials Science and Engineering A335 2002 ), p. 236-245 ISSN: 0025-5416 10.1016/S0921-5093(01)01933-5 http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6WW2-46R0CM8-15J&_user=616145&_coverDate=09%2F09%2F2002&_alid=61213825&_rdoc=1&_fmt=summary&_orig=search&_cdi=7118&_sort=d&_st=4&_docanchor=&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=efd9e0b552f6ef425492587f3b7facea Zhang J. , Singer R. :Effect of hafnium on the castability of directionally solidified nickel-base superalloys Zeitschrift für Metallkunde 93 2002 ), p. 806-811 ISSN: 0044-3093 10.3139/146.020806 Zhang J. , Singer R. :Hot tearing of nickel-based superalloys during directional solidification Acta Materialia 50 2002 ), p. 1869-1879 ISSN: 1359-6454 10.1016/S1359-6454(02)00042-3
2001
Báder E. , Zoltai L. , Hördler M. , Arató P. , Singer R. , Kaptay G. :Wettability of silicon nitride based ceramic by liquid metals Transactions of Joining and Welding Research Institute 30 2001 ), p. 137-141 ISSN: 0387-4508 Eitschberger M. , Körner C. , Singer R. :Schleudergießen von Metall-Keramik-Verbundwerkstoffen bei hohen Drehzahlen und Temperaturen Verbundwerkstoffe und Werkstoffverbunde (Chemnitz 5. September 2001 - 7. September 2001 )In: B. Wielage, G. Leonhardt (ed.): Verbundwerkstoffe und Werkstoffverbunde , Weinheim 2001 Heinrich F. , Körner C. , Singer R. :Encasing of aluminium foams by die casting: foam core properties and core fixing Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001) (Bremen In: Metal Foams and Porous Metal Structures , Bremen 2001 http://www.mit-verlag.de/b111.html Ilschner B. , Singer R. :Werkstoffwissenschaften und Fertigungstechnik Berlin Springer-Verlag 2001 ISBN: 3-540-67451-9 Jentsch HG. , Berner A. , Eberlein W. , Rosiwal S. , Singer R. , Breit N. , Dwars A. , Schreyer N. :CVD-Diamond-coatings on silicon-carbide-bearings for dry-running-conditions Symposium Tribological Coatings for Components (München In: Werkstoffwoche 2001 , München 2001 Jentsch HG. , Eibisch H. , Rosiwal S. , Singer R. :High growth rate and high quality CVD diamond growth Applied Diamond Coating / Frontier Carbon Technology (Auburn In: Applied Diamond Coating / Frontier Carbon Technology 2001 Körner C. , Thies M. , Arnold M. , Singer R. :Modelling of metal foaming by in-situ gas formation. MetFoam 2001 (Bremen 18. June 2001 - 20. June 2001 )In: J. Banhart, M. F. Ashby, N. A. Fleck (ed.): Cellular Metals and Foaming Technology , Bremen 2001 Ottmüller M. :Leistungsfähigere Metall-Matrix-Verbundwerkstoffe durch Steuerung der Reaktion an der Faser/Matrix-Grenzfläche 2001 )Pfennig A. :Mikrostruktur und Eigenschaften keramischer Formmassen im Feinguss 2001 )Puri W. , Schmidt W. , Meerkamm H. , Schweiger W. , Singer R. , Heinrich F. :Auslegung von Traversen für Hochleistungsbestückautomaten aus zellularen metallischen Werkstoffen VDI-Berichte 2001 ), p. 283-299 ISSN: 0083-5560 Rosiwal S. :Final Report of the Bavarian Joint Research Program on Surface Technology, Second Phase (FOROB II) Erlangen Eigenverlag 2001 http://www.abayfor.de/forob2 Schwarz S. , Musayev Y. , Rosiwal S. :Diamant auf Stahl. Diffusionschromierung im Vakuum für die CVD-Diamantbeschichtung Magazin für Oberflächentechnik 2001 2001 ), p. 59-62 ISSN: 0026-0797 http://www.hanser.de/zeitschriften-db/MO/MO100934.htm Schwarz S. , Zeiler E. , Rosiwal S. , Singer R. :Diamond Coatings as Wear Protection for Metallic Devices with Complex Geometry In: S. Rosiwal (ed.): FOROB II Abschlußbericht 2001 , p. 33-50 Schäff W. :Herstellung und Eigenschaften von Magnesium-Bauteilen mit graduierter Faserverstärkung 2001 )Zeiler E. :CVD-Diamantschichten von Titanverdichterschaufeln zur Verbesserung der Schwingungsverschleißfestigkeit 2001 )
2000
Arnold M. , Körner C. , Thies M. , Singer R. :Experimental and Numerical Investigation of the Formation of Metal Foam Materials Week 2000 (München 25. September 2000 - 28. September 2000 )Eitschberger M. , Leuchtenberger D. , Fischer I. :Mädchen + Technik Praktikum 2000, Technisch-Naturwissenschaftliches Schnupperpraktikum für Schülerinnen 2000 )Heinrich F. , Körner C. , Singer R. :Encasing of Al-foams by Die Casting as Manufacturing Process for Light Weight Components Materials Week 2000 (München 25. September 2000 - 28. September 2000 )Heinrich F. , Körner C. , Singer R. :Herstellung flächiger Leichtbauteile durch Umgießen von Aluminium-Schäumen im Druckgießverfahren Materialwissenschaft und Werkstofftechnik 32 2000 ), p. 428-431 ISSN: 0933-5137 Heinrich F. , Körner C. , Singer R. :Production of flat light-weight structural components by recasting of aluminum foams Heinrich G. :CVD-Diamantschichten zur Verbesserung der Oberflächeneigenschaften von Titanwerkstoffen in der Gelenkendoprothetik 2000 )Jentsch HG. , Rosenbauer G. , Rosiwal S. , Singer R. :Graphite interlayer formation during CVD diamond coating of iron base alloys: The analogy to metal dusting Advanced Engineering Materials 2 2000 ), p. 369-374 ISSN: 1438-1656 http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6WW2-46WP5DF-346&_user=616145&_coverDate=10%2F01%2F2002&_alid=61213825&_rdoc=7&_fmt=summary&_orig=search&_cdi=7118&_sort=d&_st=4&_docanchor=&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=5c5ca2e6e0cf3e86643a51b2e4f6587b Kautz S. :Verformungsinhomogenitäten im Multifilament-Supraleiter Ag/BiSrCaCuO 2000 )Körner C. , Berger F. , Arnold M. , Stadelmann CG. , Singer R. :Influence of processing conditions on morphology of metal foams produced from metal powder Materials Science and Technology 16 2000 ), p. 781-784 ISSN: 0267-0836 Körner C. , Heinrich F. , Singer R. , Otto A. , Schöberl T. , Geiger M. :Herstellung flächiger Verbundbauteile mit Metallschaumkernen Sonderforschungsbereich 396 - robuste verkürzte Prozessketten für flächige Leichtbauteile - 1. Berichtskolloquium (Bamberg 24. May 2000 - 25. May 2000 )In: Geiger, M.; Ehrenstein, G.W. (ed.): Sonderforschungsbereich 396 - robuste verkürzte Prozessketten für flächige Leichtbauteile - 1. Berichtskolloquium 24./25.Mai 2000 Körner C. , Schäff W. , Ottmüller M. , Singer R. :Carbon Long Fiber Reinforced Magnesium Alloys Advanced Engineering Materials 2 2000 ), p. 327-337 ISSN: 1438-1656 Körner C. , Singer R. :Processing of Metal Foams - Challenges and Opportunities Advanced Engineering Materials 2 2000 ), p. 159-165 ISSN: 1438-1656 Lohmüller A. , Eßer W. , Großmann J. , Hördler M. , Preuhs J. , Singer R. :Improved Quality and Economics of Investment Castings by Liquid Metal Cooling Media - The Selection of Cooling Media 9th International Symposium on Superalloys, SUPERALLOYS 2000 (Seven Springs 17. September 2000 - 21. September 2000 )In: K. Green, T. M. Pollock, R. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, J.J. Schirra (ed.): Superalloys 2000: Proceedings of the 9th Intenational Symposium of Superalloys , Warrendale 2000 10.7449/2000/Superalloys_2000_181_188 Pyczak F. , Biermann H. , Mughrabi H. , Volek A. , Singer R. :CBED-Measurement of Residual Internal Strains in the Neighbourhood of TCP-Phases in Ni-Base Superalloys 9th International Symposium on Superalloys, SUPERALLOYS 2000 (Seven Springs 17. September 2000 - 21. September 2000 )In: K. Green, T. M. Pollock, R. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, J.J. Schirra (ed.): Superalloys 2000: Proceedings of the 9th Intenational Symposium of Superalloys 2000 Wurm D. , Schmitt M. , Singer R. :Carbon Fibre Reinforced Magnesium Alloys with Improved Properties through CVD Fibre Coating Magnesium Alloys and their Applications (München 26. September 2000 - 28. September 2000 )In: B. L. Mordike, K. U. Kainer (ed.): Magnesium Alloys and their Applications , Weinheim 2000 Zeiler E. , Rosiwal S. , Singer R. , Klaffke D. :Reducing Friction and Wear of Titanium Alloys by CVD-Diamond Coating 12th International Colloquium (Esslingen In: TRibology 2000 - PLUS 2000 Zwicker HU. :Antike Münzen (Tiberius - Traian) Erlangen Univ.-Bibliothek Erlangen 2000 ISBN: 3930357402
1999
Blackford J. , Randelzhofer P. , Singer R. :Crack formation during solidification Erstarrung metallischer Schmelzen in Forschung und Gießereipraxis (Aachen 16. March 1999 - 17. March 1999 )In: Andreas Ludwig (ed.): Erstarrung metallischer Schmelzen in Forschung und Gießereipraxis , Weinheim 1999 Grossmann J. , Preuhs J. , Eßer W. , Singer R. :Investment Casting of High Performance Turbine Blades by Liquid Metal Cooling - A Step Forward Towards Industrial Scale Manufacturing International Symposium on Liquid Metal Processing and Castings (Santa Fe Grögler T. :Niederdruck-Abscheidung von Diamantschichten auf Titanwerkstoffen als Verschleißschutz 1999 )Grögler T. , Rosiwal S. , Singer R. :Verschleißschutz von Titanlegierungen für die Luftfahrttechnik durch CVD-Diamantschichten Werkstoffwoche '98 (München In: R. Stauber, C. Liesner, R. Bütje, M. Bannasch (ed.): Werkstoffe für die Verfahrenstechnik/Werkstoffwoche 98, Symposium 2 1999 Grögler T. , Zeiler E. , Auer W. , Mayerhofer C. , Rosiwal S. , Singer R. :Thermodynamic and Kinetic Investigation of Low Pressure Hydrogen Absorption by the Titanium Alloy Ti-6Al-4V Titanium '99 (St. Petersburg 7. June 1999 - 11. June 1999 )In: I. V. Gorynin, S. S. Ushkov (ed.): Proceedings of the Ninth World Conference of Titanium 1999 Grögler T. , Zeiler E. , Plewa O. , Rosiwal S. , Singer R. :CVD diamond films as protective coatings on titanium base alloys Journal of Advanced Materials 31 1999 ), p. 8-13 ISSN: 1070-9789 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0343081469&origin=inward Grögler T. , Zeiler E. , Rosiwal S. , Singer R. :3D-Diamantbeschichtung von Titanverdichterschaufeln in Flugtriebwerken Workshop Hochleistungsschichten für Verbrennungsmotoren (Frankfurt/Main Hartmann M. , Crößmann I. , Reindel K. , Singer R. :Microstructure and Mechanical Properties of Cellular Magnesium Matrix Composites MetFoam '99 (Bremen In: J. Banhart, M. F. Ashby, N. A. Fleck (ed.): Metal Foams and Porous Metal Structures , Bremen 1999 Heck K. , Blackford J. , Singer R. :Castability of directionally solidified nickel base superalloys Materials Science and Technology 15 1999 ), p. 213-220 ISSN: 0267-0836 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0001526257&origin=inward Hegels J. :Herstellung und Eigenschaften einer oxiddispersionsgehärteten Chrombasislegierung 1999 )Heinrich G. , Rosiwal S. , Singer R. :Biokompatibilitaet von CVD-Diamantschichten auf Titanlegierungen Werkstoffwoche '98 (München 12. October 1998 - 15. October 1998 )In: H. Planck, H. Stallforth (ed.): Werkstoffe für die Medizintechnik/Werkstoffwoche 98, Symposium 4 1999 Heinrich G. , Sörgel U. , Hölzel P. , Rosiwal S. , Singer R. :Characterization of CVD-Diamond Coated Titanium Alloys for Biomedical Applications 9th Cimtec-World Forum on New Materials (Florenz 14. June 1998 - 19. June 1998 )In: P. Vincenzini (ed.): Vol. 21 Diamond Films - II, Proceedings of Topical Symposium IV "Diamond Films: Synthesis, Processing and Applications" of the Forum on New Materials of the 9th CIMTEC-World Ceramics Congress and Forum on New Materials 1999 Janousek M. , Heilmaier M. , Köck W. , Singer R. :Creep Behavior of Novel Oxide Dispersion Strengthened Chromium-Base Alloys Creep Behavior of Advanced Materials for the 21st Century (San Diego 28. February 1999 - 4. March 1999 )Klaffke D. , Zeiler E. , Grögler T. , Hiltner K. , Rosiwal S. , Singer R. :Friction and wear behaviour of polycrystalline diamond coatings on Ti-6Al-4V in sliding contact with ceramics Tribologie und Schmierungstechnik 46 1999 ), p. 45-49 ISSN: 0724-3472 Körner C. , Singer R. :Numerical Simulation of Foam Formation and Evolution with Modified Cellular Automata MetFoam '99 (Bremen In: J. Banhart, M. F. Ashby, N. A. Fleck (ed.): Metal Foams and Porous Metal Structures , Bremen 1999 Ottmüller M. , Körner C. , Singer R. :Influence of the Fiber-Matrix Interface on the Strength of Unidirectional Carbon Fiber Reinforced Magnesium Composites Euromat 99 (München In: Metal Matrix Composites and Foam 1999 Peuker C. , Nickel W. , Neubing HC. , Stadler J. , Singer R. :Dispersionsgehärtete Kupferwerkstoffe mit hoher Leitfähigkeit Werkstoffwoche 1998 (München Popovska N. , Gerhard H. , Emig G. , Wurm D. , Singer R. :Chemical Vapor Deposition of Silicon Carbide and Titanium Nitride on continuous carbon fibres as a protective layer in Metal Matrix Composites 9th Cimtec-World Forum of New Materials (Florenz 14. June 1998 - 19. June 1998 )In: P. Vincenzini (ed.): Vol. 22: Advanced Structural Fiber Composites - III, Proceedings of Topical Symposium V "Advanced Structural Fiber Composites" of the Forum on New Materials of the 9th CIMTEC-World Ceramics Congress and Forum on New Materials 1999 Rosiwal S. , Zeiler E. , Rüffer M. , Schwarz S. , Lemmer O. , Singer R. :Well adherent and morphologically controlled diamond coatings on three dimensional engineering components: A physicists dream or an engineer's reality? International Confernce on Metallurgical Coatings and Thin Films (San Diego Schäff W. , Hagenbruch M. , Körner C. , Singer R. :Fabrication process for continuous magnesium/carbon-fibre composites with graded fibre content Proceedings of the 1998 5th International Symposium on Functionally Graded Materials, FGM '98 (Dresden In: Proceedings of the 1998 5th International Symposium on Functionally Graded Materials, FGM '98 , Uetikon-Zuerich, Switzerland 1999 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032676217&origin=inward Schäff W. , Heinrich F. , Körner C. , Singer R. :Thermal Fatigue of Locally Fiber Reinforced Magnesium with Graded Structure 12th International Conference on Composite Materials (Paris Schäff W. , Heinrich F. , Körner C. , Singer R. :Thermische Ermüdung von lokal verstärkten Magnesium-Kohlenstoff-Verbundwerkstoffen mit gradierter Struktur Verbundwerkstoffe und Werkstoffverbunde (Hamburg 3. October 1999 - 7. October 1999 )In: K. Schulte, K. U. Kainer (ed.): Verbundwerkstoffe und Werkstoffverbunde 1999 Zeiler E. , Grögler T. , Franz A. , Plewa O. , Rosiwal S. , Singer R. :Erosion resistance of CVD diamond-coated titanium alloy for aerospace applications Surface & Coatings Technology 112 1999 ), p. 129-132 ISSN: 0257-8972 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0033077682&origin=inward Zeiler E. , Grögler T. , Heinrich G. , Rosiwal S. , Singer R. :Diamond coatings - a new approach for wear protection of titanium alloys Titanium '99 (St. Petersburg 7. July 1999 - 11. July 1999 )In: I. V. Gorynin, S. S. Ushkov (ed.): Proceedings of the Ninth World Conference of Titanium 1999 Zeiler E. , Hiltner K. , Lemmer O. , Rosiwal S. , Singer R. :3D-Diamantbeschichtung von Titanbauteilen Werkstoffwoche 98 (München 12. October 1998 - 15. October 1998 )In: H. Dimigen, W. Paatsch (ed.): Oberflächentechnik / Werkstoffwoche 98, Symposium 11 1999 Zeiler E. , Klaffke D. , Hiltner K. , Grögler T. , Rosiwal S. , Singer R. :Tribological performance of mechanically lapped chemical vapor deposited diamond coatings Surface & Coatings Technology 1999 ), p. 599-608 ISSN: 0257-8972 10.1016/S0257-8972(99)00136-X Zwicker HU. :Antike Münzen (Römische Republik und Augustus) Erlangen Univ.-Bibliothek Erlangen 1999 ISBN: 3930357313
1998
Bergmann HW. , Mayer S. , Plochikhine VV. :Grain selection and texture evolution during solidification of laser beam welds Materials Science Forum 273-275 1998 ), p. 345-362 ISSN: 0255-5476 https://www.scopus.com/record/display.uri?eid=2-s2.0-0038522224&origin=inward Gruber M. :Dispersionsgehärtetes Kupfer mit hoher Leitfähigkeit durch Hochenergiemahlen 1998 )Grögler T. , Franz A. , Klaffke D. , Rosiwal S. , Singer R. :Tribological optimization of CVD diamond coated Ti-6A1-4V Diamond and Related Materials 7 1998 ), p. 1342-1347 ISSN: 0925-9635 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032172524&origin=inward Grögler T. , Plewa O. , Rosiwal S. , Singer R. :CVD diamond films as protective coatings on titanium alloys International Journal of Refractory Metals & Hard Materials 16 1998 ), p. 217-222 ISSN: 0263-4368 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0031639892&origin=inward Grögler T. , Zeiler E. , Hörner A. , Rosiwal S. , Singer R. :Microwave-plasma-CVD of diamond coatings onto titanium and titanium alloys Surface & Coatings Technology 98 1998 ), p. 1079-1091 ISSN: 0257-8972 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0039355516&origin=inward Hartmann M. , Reindel K. , Singer R. :Fabrication and properties of syntactic magnesium foams Proceedings of the 1998 MRS Spring Symposium (San Francisco, CA, USA In: Schwartz D.S.; Shih D.S.; Evans A.G.; Wadley H.N.G. (ed.): Proceedings of the 1998 MRS Spring Symposium , Warrendale, PA, United States 1998 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032292780&origin=inward Hegels J. , Köck W. , Singer R. , Janousek M. :Improved Mechanical Alloying Techniques for Oxide Dispersion Strengthened Chromium Base Alloys 1998 PM World Congress (Granada Heinrich G. , Rinne B. , Thull R. , Rosiwal S. , Singer R. :Characterization of CVD diamond-coated titanium base compounds for biomedical applications Biomedizinische Technik 1998 ), p. 382-383 ISSN: 0013-5585 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032239239&origin=inward Krug P. :Einfluss einer Flüssigkeitskühlung auf die Mikrostruktur gerichtet erstarrter Superlegierungen 1998 )Körner C. , Bergmann HW. :The physical defects of the hyperbolic heat conduction equation Applied Physics A-Materials Science & Processing 67 1998 ), p. 397-401 ISSN: 0947-8396 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032181110&origin=inward Plochikhine VV. :Modellierung der Kornstrukturausbildung beim Laserstrahlschweißen 1998 )Raduta S. , Grötzschel G. , Kaschta J. , Rosiwal S. , Singer R. :Fabrication and Properties of Injection Moulded Hardmetal Parts by use of a Pressure Die Casting Machine 1998 PM World Congress (Granada Wurm D. :Einfluss einer Faserbeschichtung auf die Eigenschaften von kohlefaserverstärkten Magnesiumlegierungen 1998 )Zwicker HU. :Antike Münzen (Sassaniden bis Zeugitana) Erlangen Univ.-Bibliothek Erlangen 1998 ISBN: 3930357232
1997
Barnikel J. , Schutte K. , Bergmann HW. :Nitrieren von Aluminiumlegierungen mit UV-Laserstrahlung Härterei-Technische Mitteilungen 52 1997 ), p. 91-93 ISSN: 0017-6583 https://www.scopus.com/record/display.uri?eid=2-s2.0-0031100904&origin=inward Bartl N. , Bergmann HW. :Influence of processing speed on cut quality in laser beam gas cutting of copper Lasers in Materials Processing (München https://www.scopus.com/record/display.uri?eid=2-s2.0-0031300906&origin=inward Bergmann HW. , Schutte K. , Barnikel J. , Seefeld T. :Erhöhung der Korrosionsbeständigkeit von Aluminiumlegierungen durch Excimerlaserstrahlung Härterei-Technische Mitteilungen 52 1997 ), p. 94-96 ISSN: 0017-6583 https://www.scopus.com/record/display.uri?eid=2-s2.0-0031098924&origin=inward Bergmann HW. , Stiele H. , Bohner F. :Gefüge unlegierter Stähle: Eine quantitative Beschreibung des Gefüges nach dem temperaturkontrollierten Randschichthärten mit Laserstrahlung Härterei-Technische Mitteilungen 52 1997 ), p. 108-116 ISSN: 0017-6583 https://www.scopus.com/record/display.uri?eid=2-s2.0-0031094557&origin=inward Damaschek R. :Experimentelle Bestimmung und numerische Simulation der Maß- und Formänderungen von quaderförmigen Bauteilen nach dem temperaturkontrollierten Laserstrahlrandschichthärten von Kaltarbeitsstählen 1997 )Damaschek R. , LeRoux Strydom I. , Bergmann HW. :Improved adhesion of TiN deposited on prenitrided steels Surface Engineering 13 1997 ), p. 128-132 ISSN: 0267-0844 10.1179/sur.1997.13.2.128 Fitzgerald T. , Singer R. :An analytical model for optimal directional solidification using liquid metal cooling Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 28 1997 ), p. 1377-1383 ISSN: 1073-5623 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0031164995&origin=inward Grögler T. , Hörner A. , Rosiwal S. , Singer R. :Mikrowellenplasma-CVD- Abscheidung von Diamantschichten auf Titan und Titanlegierungen Werkstoffwoche '96 In: G. Ziegler, H. Cherdron, W. Hermel, J. Hirsch, H. Kolaska (ed.): Werkstoff- und Verfahrenstechnik/Werkstoffwoche '96, Symposium 6 1997 Grögler T. , Zeiler E. , Dannenfeldt M. , Rosiwal S. , Singer R. :Growth stages of chemical vapor deposited diamond on the titanium alloy Ti-6A1-4V Diamond and Related Materials 6 1997 ), p. 1658-1667 ISSN: 0925-9635 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0040309623&origin=inward Hartmann M. , Singer R. :Herstellung und Eigenschaften syntaktischer Magnesiumschäume Symposium Metallschäume (Bremen 6. March 1997 - 7. March 1997 )In: J. Banhart (ed.): Metallschäume , Bremen 1997 Heinrich G. , Grögler T. , Rosiwal S. , Singer R. :CVD diamond coated titanium alloys for biomedical and aerospace applications Surface & Coatings Technology 1997 ), p. 514-520 ISSN: 0257-8972 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0031247495&origin=inward Hintz G. , Tkotz R. , Keusch C. , Negendanck M. , Staudigel J. , Christiansen J. , Hoffmann D. , Eisner K. , Lang A. , Schutte K. , Bergmann HW. :XeCl-excimer laser-MOPA chain for shock hardening XI International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference (Edinburgh 4. April 1997 - 4. April 1997 )10.1117/12.270208 Janousek M. :Mikrostruktur und Verformungsverhalten pulvermetallurgischer Chrombasislegierungen zwischen Raumtemperatur und 1100 °C in Abhängigkeit von der Herstellungstechnologie 1997 )Kautz S. , Fischer B. , Müller J. , Gierl J. , Roas B. , Neumüller HW. , Singer R. :The mechanism of sausaging Ag/Bi-2223 multifilament-tapes and the effect of processing parameters 3rd European Conf. on Applied Superconductivity (Eindhoven 30. June 1997 - 3. July 1997 )Körner C. :Theoretische Untersuchungen zur Wechselwirkung von ultrakurzen Laserpulsen mit Metallen 1997 )Lang A. , Barnikel J. , Eisner K. , Schutte K. , Bergmann HW. :Alu-Oberflächen veredeln: Randschichtbehandlungen mit UV-Laserstrahlung verringern Verschleiß, Ermüdung und Korrosion Laser-Praxis 1 1997 )ISSN: 0937-7069 https://www.scopus.com/record/display.uri?eid=2-s2.0-1842762148&origin=inward Mayerhofer R. :Mikromaterialbearbeitung mit Kupferdampflasern 1997 )Messer K. , Bergmann HW. :Stand des Laserstrahlhärtens Härterei-Technische Mitteilungen 52 1997 ), p. 74-82 ISSN: 0017-6583 https://www.scopus.com/record/display.uri?eid=2-s2.0-5744223792&origin=inward Popovska N. , Gerhard H. , Wurm D. , Poscher S. , Emig G. , Singer R. :Chemical vapor deposition of titanium nitride on carbon fibres as a protective layer in metal matrix composites Materials & Design 18 1997 ), p. 239-242 ISSN: 0264-1275 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0031348242∨igin=inward Schutte K. , Gan EKW. , Koch J. , Lang A. , Hartmann M. , Mayerhofer R. , Slunecko T. , Bergmann HW. :Copper vapour laser MOPA chain for highly efficient and precise material removal XI International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference (Edinburgh 4. April 1997 - 4. April 1997 )In: Proceedings Volume 3092, XI International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference 1997 10.1117/12.270238 Schutte K. , Queitsch R. , Qian F. , Bergmann HW. , Wei M. , Lang A. :Excimerlasergestützte Abscheidung diamantähnlicher Kohlenstoffschichten Härterei-Technische Mitteilungen 52 1997 ), p. 97-100 ISSN: 0017-6583 https://www.scopus.com/record/display.uri?eid=2-s2.0-0031098432&origin=inward Stiele H. :Werkstofftechnische Untersuchungen zum Schweißen von Eisen-Nickel-Dünnblechen mit dem Festkörperlaser 1997 )Wurm D. , Singer R. , Popovska N. , Gerhard H. , Emig G. :Magnesium-Matrix-Verbundwerkstoffe mit CVD-TiN-beschichteten Kohlenstoffasern Verbundwerkstoffe und Werkstoffverbunde (Kaiserslautern Zeiler E. , Grögler T. , Plewa O. , Winter R. , Rosiwal S. , Singer R. :CVD-Diamantschichten als Verschleißschutz von Metallen 2. Industriefachtagung Oberflächen- und Wärmebehandlungstechnik OWT'97 (Chemnitz Zwicker HU. :Antike Münzen (Lycaonia bis Parther) Erlangen Univ.-Bibliothek Erlangen 1997 ISBN: 3930357186 Öttinger O. , Schäff W. , Hausmann C. , Heyne T. , Singer R. :Mechanical Properties of Woven Fabric Carbon/Magnesium-Composites ICCM-11 (Conrad Jupiters In: Conf. Proc. ICCM-11 1997
1996
Aumüller B. , Kirkbride A. , Zeller R. , Bergmann HW. :Prozeßidentifikation beim Plasmaspritzen temperatursensitiver Werkstoffe mit Hilfe einer Infrarot-Hochtemperatur-Thermokamera Materialwissenschaft und Werkstofftechnik 27 1996 ), p. 72-79 ISSN: 0933-5137 https://www.scopus.com/record/display.uri?eid=2-s2.0-0030533202&origin=inward Barnikel J. , Seefeld T. , Emmel A. , Schubert E. , Bergmann HW. :Enhancing the corrosion resistance of metals by laser processing JOM Journal of the Minerals, Metals and Materials Society 48 1996 ), p. 29-32 ISSN: 1047-4838 10.1007/BF03222939 Bergmann HW. , Körner C. , Hartmann M. , Mayerhofer R. :Precision machining with copper vapour lasers NATO Proc. Advanced Workshop, Pulsed Metal Vapor Lasers Grögler T. , Heinrich G. , Rosiwal S. , Singer R. :Diamantschichten als Verschleißschutz Neue Anwendungen für moderne Oberflaechentechnologien (Nürnberg Heck K. :Rissbildung bei der gerichteten Erstarrung von Nickel-Basislegierungen 1996 )Heinrich G. , Grögler T. , Rosiwal S. , Singer R. , Stöckel R. , Ley L. :The influence of diamond chemical vapour deposition coating parameters on the micro structure and properties of titanium substrates Diamond and Related Materials 5 1996 ), p. 304-307 ISSN: 0925-9635 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0041686948&origin=inward Körner C. , Bergmann HW. :Theoretical description of laser ablation Körner C. , Bergmann HW. :Thermal and Mechanical Aspects in Short Pulse Laser Interaction with Metals European Conference on Laser Treatment of Materials 1996 (Stuttgart Körner C. , Mayerhofer R. , Hartmann M. , Bergmann HW. :Physical and material aspects in using visible laser pulses of nanosecond duration for ablation Applied Physics A-Materials Science & Processing 63 1996 ), p. 123-131 ISSN: 0947-8396 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0030214563&origin=inward Lang A. , Bergmann HW. :Herstellung diamanthaltiger, endkonturnaher Metallmatrix-Verbundwerkstoffe durch Laserstrahlbeschichten Materialwissenschaft und Werkstofftechnik 27 1996 ), p. 215-226 ISSN: 0933-5137 https://www.scopus.com/record/display.uri?eid=2-s2.0-0039471965&origin=inward Müller K. , Körner C. , Bergmann HW. :Numerische Simulation der Eigenspannungen und Deformationen beim Laserstrahlrandschichthärten Härterei-Technische Mitteilungen 51 1996 ), p. 19-28 ISSN: 0017-6583 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=4243138582∨igin=inward Singer R. :Innovationsförderung bei metallischen Werkstoffen durch Förderprogramme in Bayern 1. Forum des Bayerischen Forschungsverbundes Materialwissenschaften (München Zwicker HU. :Antike Münzen aus Kleinasien (Mysien bis Pisidien) Erlangen Univ.-Bibliothek Erlangen 1996 ISBN: 3930357135 Zwicker HU. :Griechische Münzen (Griechenland, Ägäis, Pontus, Paphlagonien und Bithynien) Erlangen Univ.-Bibliothek Erlangen 1996 ISBN: 3930357143 Öttinger O. :Herstellung, Mikrostruktur und Eigenschaften von kohlenstofflangfaserverstärkten Magnesiumlegierungen 1996 )
1995
Bergmann HW. , Hartmann M. , Mayerhofer R. , Körner C. :Kupferdampflaser für die Mikromaterialbearbeitung In: Laser '95 1995 , p. 231-237 Bergmann HW. , Schutte K. , Schubert E. , Emmel A. :Laser-surface processing of metals and ceramics for industrial applications Applied Surface Science 86 1995 ), p. 259-265 ISSN: 0169-4332 10.1016/0169-4332(94)00381-5 Domes J. :Die Ausbildung von Makroeigenspannungen beim Laserstrahlrandschichthärten und anderen Verfahren der Lasermaterialbearbeitung 1995 )Fitzgerald T. , Singer R. :Modeling of the Directional Solidification of Turbine Blades via Liquid Metal Cooling 2nd Pacific Rim Int. Conf. on Modeling of Casting and Solidification (Hitachi 25. January 1995 - 27. January 1995 )In: E. Niyama, H. Kodama (ed.): Conf. Proc., 2nd Pacific Rim Int. Conf. on Modeling of Casting and Solidification 1995 Greiner H. , Grögler T. , Köck W. , Singer R. :Chromium Based Alloys for High Temperature SOFC Applications 4th Int. SOFC Symposium (Yokohama 18. June 1995 - 23. June 1995 )In: M. Dokiya et al. (ed.): Conf. Proc. 4th Int. SOFC Symposium, 1995 1995 Gruber M. , Singer R. , Peuker C. , Große J. , Hauner F. :Copper Alloys with Improved Strength and Conductivity by High-Energy Ball Milling Euromat 95 (Venedig In: Conf. Proc. 4th European Conference on Advanced Materials and Processes 1995 Hilbinger RM. , Mayer S. , Körner C. , Bergmann HW. :Eigenspannungen beim Laserstrahlschweißen verschiedender Baustähle Härterei-Technische Mitteilungen 50 1995 ), p. 380-386 ISSN: 0017-6583 Jaschek R. :Einfluß des Gasdruckes und Charakterisierung der Strahl-Stoff-Wechselwirkungen während der Oberflächen- und Randschichtbehandlung von Metallen mit TEA-CO 2 -Laserstrahlung 1995 )Kohler S. , Fitzgerald T. , Singer R. :Fabrication and Properties of Syntactic Magnesium Foams 15. VDI/VW-Gemeinschaftstagung, Neue Werkstoffe im Automobilbau 1995 (Wolfsburg In: Conf. Proc. 15. VDI/VW-Gemeinschaftstagung, Neue Werkstoffe im Automobilbau, Wolfsburg 1995 1995 Körner C. , Bergmann HW. :Theoretical Descreption of Laser Ablation and its Application on Precision Machining Laser Processing: Surface Treatment and Film Deposition (Sesimbra In: Proceedings of the NATO ASI 1995 Peuker C. :Herstellung und Eigenschaften von hochenergiegemahlenen Kontaktwerkstoffen auf Silberbasis 1995 )Singer R. :Möglichkeiten der Effizienzsteigerung von Gasturbinen durch innovative Werkstofftechnik VDI-Berichte 1995 ), p. 389-396 ISSN: 0083-5560 Wang H. , Bergmann HW. :Rapid graphitization of a pulsed laser remelted ductile cast iron during multipass overlap melting Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 26 1995 ), p. 793-800 ISSN: 1073-5623 10.1007/BF02649077 Wang HM. , Bergmann HW. :Annealing laser-melted ductile iron by pulsed Nd:YAG laser radiation Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 196 1995 ), p. 171-176 ISSN: 0921-5093 10.1016/0921-5093(94)09684-8 Wang HM. , Bergmann HW. :Fabricating FE-base alloys containing rapidly solidified eutectic cementite and ultra-fine graphite by heat treating laser-melted ductile iron Scripta Metallurgica et Materialia 32 1995 ), p. 1149-1152 ISSN: 0956-716X 10.1016/0956-716X(95)00116-D Wurm D. , Öttinger O. , Singer R. :The Influence of Carbon Fiber Type and Stress Ratio on the Fatigue Behavior of Unidirectionally Reinforced C/Mg-Composites ICCM-10 (Whistler In: Conf. Proc. ICCM-10, Whistler, 1995 1995 Zwicker HU. :Keltische und griechische (Italien, Sizilien) Münzen Erlangen Univ.-Bibliothek Erlangen 1995 ISBN: 3930357011 Öttinger O. , Grau C. , Winter R. , Singer R. , Feldhoff A. , Pippel E. , Woltersdorf J. :The Effect of Aluminum Additions on Interfacial Microstructure and Mechanical Properties of C/Mg-Composites ICCM-10 (Whistler
1994
Bergmann HW. , Mayerhofer R. , Slunecko T. , Hartmann M. , Gan E. :Improved drilling and cutting with copper vapour lasers 1994 Conference on Lasers and Electro-Optics Europe (Amsterdam In: Proceedings of the 1994 Conference on Lasers and Electro-Optics Europe , Piscataway, NJ, United States 1994 https://www.scopus.com/record/display.uri?eid=2-s2.0-0028594789&origin=inward Bergmann HW. , Müller D. , Endres T. , Damaschek R. , Domes J. , Bransden A. :Industrial applications of surface treatments with high power lasers 2nd ASM Heat Treatment and Surface Engineering Conference (Dortmund In: Proceedings of the 2nd ASM Heat Treatment and Surface Engineering Conference. Part 1 (of 2) , Aedermannsdorf, Switzerland 1994 https://www.scopus.com/record/display.uri?eid=2-s2.0-0028666881&origin=inward Domes J. , Körner C. , Bergmann HW. :Residual stresses in laser hardened steels and their numerical simulation European Conference on Laser Treatment of Materials 1994 Gruber M. , Grau C. , Öttinger O. , Singer R. :Herstellung und Eigenschaften von kohlenstofflangfaserverstaerkten Magnesiumlegierungen fuer die Luft- und Raumfahrttechnik Deutscher Luft- und Raumfahrtkongress 1994 (Erlangen 4. October 1994 - 7. October 1994 )In: Jahrbuch 1994/I der DGLR 1994 Hugo F. , Mayer H. , Singer R. :Directional and Single Crystal Solidification using Liquid Metal Cooling 42nd Annual Technical Meeting and Tabletop Exhibition, Investment Casting Institute (Atlanta In: Conference Proceedings, 42nd Annual Technical Meeting and Tabletop Exhibition, Investment Casting Institute, Atlanta, Georgia 1994 Körner C. , Müller K. , Domes J. , Damaschek R. , Bergmann HW. :Experimental and numerical determination of distortion of laser hardened steels International Symposium on Metals Science: Numerical Predictions of Deformation Processes and the Behaviour of Real Materials (Roskilde Müller D. :Beitrag zum Randschichthärten mit CO2-Lasern für kraftübertragende Komponenten im Motorenbau 1994 )Schaaf P. , Emmel A. , Schubert E. , Bergmann HW. , Lieb K. :Surface investigation of excimer laser irradiated phosphatized steel plates Hyperfine Interactions 92 1994 ), p. 1361-1366 ISSN: 0304-3843 10.1007/BF02065779 Singer R. :Advanced Materials and Processes for Land-Based Gas Turbines Materials for Advanced Power Engineering (Liege 3. October 1994 - 6. October 1994 )In: D. Coutsouradis et al. (ed.): Materials for Advanced Power Engineering 1994 Wang H. , Bergmann HW. :Tempering rapidly solidified ductile cast iron by pulsed laser beam reprocessing Scripta Metallurgica et Materialia 31 1994 ), p. 433-438 ISSN: 0956-716X 10.1016/0956-716X(94)90014-0 Wang HM. , Stiele H. , Lang A. , Körner C. , Bergmann HW. :Surface remelting of ductile iron with a high power pulsed Nd:YAG laser High Power Lasers and Laser Applications V (Wien Öttinger O. , Gruber M. , Grau C. , Singer R. :Properties and Microstructures of Carbon Fiber Reinforced Magnesium Alloys High Performance Composites: Commonality of Phenomena In: K. K. Chawla, P. K. Liaw, S. G. Fishman (ed.): High Performance Composites: Commonality of Phenomena 1994
1993
Bergmann HW. :On-line diagnostics for industrial laser surface treatments Berichte der Bunsengesellschaft für physikalische Chemie 97 1993 ), p. 1697-1706 ISSN: 0005-9021 https://www.scopus.com/record/display.uri?eid=2-s2.0-0027743866&origin=inward Biermann BA. :Schneiden und Schweißen von Titan- und Aluminium-Luftfahrtlegierungen mit dem CO2-Laser 1993 )Brauner H. , Holzwarth U. , Zwicker HU. :Development of a new Casting Technology for Dental Applications using Titanium 7th World Ti Conf. (San Diego 29. June 1992 - 2. July 1992 )In: F. H. Froes, I. L. Caplan (ed.): TITANIUM '92: Science and Technology, Vols 1-3 1993 Emmel A. :Aufbau und Eigenschaften von Oberflächenfilmen nach einer Excimerlaserbelichtung und deren Bedeutung für das Prozessverhalten 1993 )Endres T. :Möglichkeiten der Oberflächenmodifizierung von Motorbauteilen aus Aluminium-Gußlegierungen 1993 )Koai K. , Damaschek R. , Bergmann HW. :Heat transfer laser hardening of rotating cylinders 1993 ASME Winter Annual Meeting (New Orleans In: Proceedings of the 1993 ASME Winter Annual Meeting , New York, NY, United States 1993 https://www.scopus.com/record/display.uri?eid=2-s2.0-0027875697&origin=inward Koai K. , Jaschek R. , Bergmann HW. :Improved CO2-Laser hardening efficiency by combined pulsed and continuous wave radiation 1993 ASME Winter Annual Meeting (New Orleans In: Proceedings of the 1993 ASME Winter Annual Meeting , New York, NY, United States 1993 https://www.scopus.com/record/display.uri?eid=2-s2.0-0027887543&origin=inward Rosiwal S. :Grundlagen und technische Anwendungsmöglichkeiten der Methode der Differenzreflektometrie für die schnelle und zerstörungsfreie Oberflächenanalyse 1993 )Schriever A. , Rosiwal S. , Becker J. , Heidemann D. :Relative Farbbestimmung dentaler Werkstoffe unter Anwendung spektraler Reflexionsmessungen Deutsche zahnarztliche Zeitschrift 48 1993 ), p. 167-169 ISSN: 0012-1029 Schubert E. , Bergmann HW. :Surface modification of ceramic materials using excimer lasers Surface Engineering 9 1993 ), p. 77-81 ISSN: 0267-0844 10.1179/sur.1993.9.1.77 Schubert E. , Queitsch R. , Bergmann HW. , Rosiwal S. , Schutte K. :Excimer laser applications for the automotive industry 2nd EUREKA 205 on "Excimer laser applications" (Erlangen 1. April 1993 - 2. April 1993 )In: H. W. Bergmann, K. Schutte (ed.): Proceedings of 2nd EUREKA 205 on "Excimer laser applications" 1993 Schutte K. :Prozeßdiagnostik und technologische Untersuchungen zur Materialbearbeitung mit Excimerlasern 1993 )Zwicker HU. , Oddy A. , la Niece S. :Roman techniques of manufacturing silver-plated coins In: S. la Niece, P. Craddock (ed.): Metal Plating and Patination 1993 , p. 223-246 ISBN: 978-0-7506-1611-9 10.1016/B978-0-7506-1611-9.50024-8 Öttinger O. , Singer R. :An Advanced Melt Infiltration Process for the Net Shape Production of Metal Matrix Composites Zeitschrift für Metallkunde 84 1993 ), p. 827-832 ISSN: 0044-3093
1991
Biermann B. , Biermann S. , Bergmann HW. :Cutting of Al Alloys Using High Pressure Coaxial Nozzle Journal of Laser Applications 3 1991 ), p. 13-20 ISSN: 1042-346X 10.2351/1.4745271 Biermann BA. , Dierken R. , Bergmann HW. :Laserstrahlschweißen hochfester Al-Legierungen Zeitschrift für Metallkunde 4 1991 )ISSN: 0044-3093 Hatz G. , Hatz V. , Zwicker HU. , Gale NH. , Stos-Gale ZA. :Otto-Adelheid-Pfennige. Untersuchungen zu Münzen des 10./11. Jahrhunderts 1991 ISBN: 9171928278 Raab WH. , Rosiwal S. , Reithmayer K. , Bergmann HW. :Die Differenzreflektometrie als mögliche Prozeßsteuerung für den Lasereinsatz in der Zahnheilkunde Deutsche zahnarztliche Zeitschrift 46 1991 ), p. 729-733 ISSN: 0012-1029 Rosiwal S. , Schutte K. , Queitsch R. , Bergmann HW. :Oberflächenanalyse von Metallen mit der Methode der Differenzreflektometrie Blech, Rohre, Profile 38 1991 ), p. 973-976 ISSN: 0006-4688 Schubert E. , Rosiwal S. , Bergmann HW. :Investigations on excimer-laser-treated Cu/Cr contact material ECO 4 (Den Haag In: Proceedings of SPIE - The International Society for Optical Engineering 1503 1991 Zwicker HU. :Investigations on sources and fabrication methods of bronze age silver from Ugarit 6th Int. Coll. on Aegean Prehistory (Athen 30. August 1987 )In: Proc. 6th Int. Coll. on Aegean Prehistory 1991 Zwicker HU. , Biermann B. , Emmerig H. , Lassner H. , Nigge K. :Untersuchungen zur Herstellung und Legierungszusammensetzung von Regensburger und Süddeutschen Pfennigen des 12.-15. Jahrhunderts In: Berichte aus der Geld-, Münz- und Medaillenkunde Freiburg Kricheldorf Verlag 1991 Zwicker HU. , Grembler E. , Nigge K. , Lassner H. , Stos-Gale ZA. , Gale NH. :Untersuchungen zur Metall- und Legierungsherstellung im Bereich der römischen Stadt Nida bei Frankfurt/Main In: Jahrbuch des Römisch-Germanischen Zentralmuseums Mainz 1991 Zwicker HU. , Lassner H. , Nigge K. :Non destructive and other investigations on metal objects of the Archaeological Museum Nicosia In: Festschrift Prof. Dr. V. Karageorghis 1991
1990
Bach J. , Damaschek R. , Geissler E. , Bergmann HW. :Laser Transformation Hardening of Different Steels 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 1 1990 Barton G. , Bergmann HW. , Schubert E. , Wehner M. , Schmidt K. :Einsatz von Excimerlasern im Automobilbau 2. Int. Anwenderforum (Bremen Bergmann HW. , Kupfer R. , Lassner H. :Further Aspects of Materials Processing with Copper Vapor Lasers 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 1 1990 Bergmann HW. , Kupfer R. , Müller D. :Laser Hardfacing ECO'3 (Den Haag In: Steels & Metals Magazine Vol. 28, No. 4/5 1990 Bergmann HW. , Müller D. , Fritsch HU. :Experimentel Investigations and Mathematical Simulation of the Influence of Carbon Concentration Profiles During Laser Hardening 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 1 1990 Bergmann HW. , Schubert E. :Modification of Metal Surfaces by Excimer Laser Treatment - State of the Art Key Engineering Materials 46-47 1990 ), p. 29-52 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.46-47.29 Bergmann HW. , Schubert E. :Review on Materials Processing with Excimer Lasers 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 2 1990 Bergmann HW. , Schubert E. , Rosiwal S. , Schmatjko KJ. , Schmidt K. :Surface Treatments with Excimer Lasers for the Automotive Industry Int. Conf. on Laser systems Application in Industry (Turin In: Proc. of the Int. Conf. on Laser systems Application in Industry 1990 Brauner H. , Zwicker HU. :Titan als neuer Dentalgußwerkstoff - technische Aspekte 1. Int. Tagung Ti als Dentalimplantatwerkstoff (Frankfurt/Main 30. June 1990 - 1. July 1990 )In: Proceedings 1. Int. Tagung Ti als Dentalimplantatwerkstoff , Berlin 1990 Brauner H. , Zwicker HU. , Holzwarth U. :Qualitätsverbesserung des dentalen Titan-Gusses durch ein neues Gießverfahren 1. Int. Tagung Ti als Dentalimplantat (Frankfurt/Main 30. June 1990 - 1. July 1990 )In: Proceedings 1. Int. Tagung Ti als Dentalimplantat , Berlin 1990 Breme J. , Zwicker HU. :TiAl5Fe2,5-Alloy for Implants Fourth Symposium on biomaterial Metalls and their Alloys in Orthopaedic Surgery (Göttingen Fink U. , Bergmann HW. :Laser Surface Treatments of Implants ECLAT '90: 3rd European Conference on Laser Treament of Materials (Erlangen In: Proceedings of 3rd European Conference on Laser Treament of Materials 1990 Geissler E. , Bergmann HW. :Laser Hardening of Steels 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 1 1990 Geissler E. , Bergmann HW. :Temperature Controlled Laser Transformation Hardening Key Engineering Materials 46-47 1990 ), p. 121-132 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.46-47.121 Juckenath B. , Bergmann HW. , Geiger M. , Kupfer R. :Cutting of Aluminium and Titanium Alloys by CO2-Lasers 9th Int. Con. Laser '89 Kupfer R. , Bergmann HW. :Materials Processing with Copper Vapor Lasers Opto-Elektronik-Magazin 6 1990 )ISSN: 0930-9713 Kupfer R. , Biermann BA. , Bergmann HW. :Cutting of Al-alloys Using different Lasers 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 2 1990 Lindner H. , Bergmann HW. , Endres T. :Remelting and Alloying of Al-Si Alloys 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 2 1990 Neudecker MK. :Erforschung der zusammenhänge zwischen magnetischer Mikrostruktur und den magnetischen Eigenschaften von Seltenerd-Dauermagneten 1990 )Rosiwal S. :Prozesskontrolle in der Laser-Oberflächenbehandlung mit Simultanspektrometer Opto 7 (Nürnberg In: Tagungsband Opto 7 1990 Rosiwal S. , Bergmann HW. :Surface treatments with the excimer laser and quality control by means of difference reflectometry EU205, int. workshop In: C. Fotakis (ed.): Excimer laser applications and optical components, EU205, int. workshop , Heraklion 1990 Rosiwal S. , Bergmann HW. :Surface treatments with the excimer laser and quality control by means of difference reflectometry 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 2 1990 Rubruck V. , Geissler E. , Bergmann HW. :Case Depth Control for Laser Treated Materials ECLAT '90 (Erlangen Schaaf P. , Gonser U. , Bergmann HW. , Schubert E. :Mössbauer Spectroscopy as a Tool to Investigate Laser Treated Surfaces 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 2 1990 Schlemper K. , Rosiwal S. , Bergmann HW. , Thomas L. :Differenzreflektometrie an NiAl- und CoGa-Legierungen nach einer Belichtung mit intensiver UV-Strahlung Zeitschrift für Metallkunde 81 1990 ), p. 761-769 ISSN: 0044-3093 Schlemper K. , Rosiwal S. , Bergmann HW. , Thomas L. :Optical Investigations of NiAl- and CoGa-Surfaces After Irradiation With Intensive UV-light 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 2 1990 Schubert E. :Zukunftsperspektiven in der Lasertechnologie auf der ECLAT'90 Opto-Elektronik-Magazin 6 1990 ), p. 346 ISSN: 0930-9713 Schubert E. :Zum Stand der Lasertechnik und anwendungen in der DDR Opto-Elektronik-Magazin 6 1990 ), p. 96 ISSN: 0930-9713 Schubert E. , Bergmann HW. :Finishing Techniques for Metals and Ceramics Using Excimer Lasers 3rd Eur. Conf. on Laser Treatment of Materials ECLAT '90 (Erlangen In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT '90 Vol. 2 1990 Zwicker HU. :Analytische und metallographische Untersuchungen zu den Fundmünzen aus Manching In: H. J. Kellner (ed.): Die Münzfunde von Manching und die keltischen Fundmünzen aus Südbayern Stuttgart Franz Steiner Verlag 1990 , p. 129, 247-261 (Die Ausgrabungen in Manching, Vol.12) Zwicker HU. :Archaeometallurgical Investigations on the Copper- and Copper-Alloy-Production in the Area of the Mediterranean Sea In: Bulletin of the Metals Museum of the Japan Institute of Metals 1990 , p. 3-32 Zwicker HU. :Influence of Textures on Creep of Titanium Alloys Titanium and Aluminium (Paris 27. February 1990 - 28. February 1990 )Zwicker HU. :Natural Copper-Arsenic alloys and smelted Arsenic Bronzes in early metal production Int. Coll. The Discovery of Metal (Saint-Germain-en-Laye 19. January 1989 - 21. January 1989 )
1989
Bergmann HW. :A Model for the Process of Laser Glading Eur. Sci. Laser Workshop on Math. Sim. (Lissabon Bergmann HW. , Endres T. , Juckenath B. :Remelting and Alloying of Al-Si-Alloys Int. Con. on Applications of Lasers & Electro-Optics '89 In: Proc. of ICALEO '89 1989 Bergmann HW. , Geiger M. , Nuss R. , Juckenath B. , Biermann S. :Laser Cutting of Aluminium and Titanium Alloys for Aerospace Applications Opto-Elektronik-Magazin 5 1989 )ISSN: 0930-9713 Bergmann HW. , Schubert E. , Schmatjko KJ. , Dembowski J. :Modification of Surface Films on Metallic Substrates by Excimer Laser Irradiation Thin Solid Films 174 1989 ), p. 33 ISSN: 0040-6090 Bergmann HW. , Vetter J. , Gross G. :Production of Metal Powders by Atomizing their Melts Conf. on Powder Metallurgy (San Diego In: Proc. Conf. on Powder Metallurgy 1989 Breme J. , Wadewitz V. :Comparison of TiTa- and TiNb-alloys of dental implants International Journal of Oral & Maxillofacial Implants 4 1989 ), p. 113-118 ISSN: 0882-2786 Emmel A. , Olsen FO. , Bergmann HW. :Contribution to Oxygen assisted CO2-Laser Cutting Opto-Elektronik-Magazin 5 1989 ), p. 57 ISSN: 0930-9713 Fritsch HU. , Bergmann HW. :Influence of the Carbon Diffusion During Laser Transformation Hardening - Numerical Simulation and Experimental Verification Eur. Sci. Laser Workshop on Math. Sim. (Lissabon Geissler E. , Bergmann HW. :Analytical Models for Simulation of Laser Hardening Workshop on Mathematical Simulation Laser Treatment of Materials (Lissabon Juckenath B. , Biermann S. , Bergmann HW. :Cutting of Al-Alloys using High Pressure Coaxial Nozzle Int. Con. on Applications of Lasers & Electro-Optics '89 In: Proc. of ICALEO '89 1989 Juckenath B. , Durchholz H. , Bergmann HW. , Dembrowski J. :Surface Treatments of Metals with Excimer Lasers Int. Congr. on Optical Science and Engineering '88 (Hamburg 19. September 1988 - 23. September 1988 )In: D. Basting (ed.): Proc. SPIE 1023, Excimer Lasers and Applications 1989 10.1117/12.950155 Kalinitchenko AS. , Bergmann HW. , Sidorov VA. :Consolidation of rapidly solidified ribbons of Aluminium-alloys Aluminium 65 1989 ), p. 75 ISSN: 0002-6689 Lee SZ. , Bergmann HW. :Einschmelzen von Diamanten in die Oberfläche von Metallen Opto-Elektronik-Magazin 5 1989 ), p. 50 ISSN: 0930-9713 Schubert E. , Bergmann HW. :Influence of exposure time, wavelength and repetitionrate on the quality of surface treatments of metals with excimerlasers Opto-Elektronik-Magazin 3 1989 ), p. 334 ISSN: 0930-9713 Schubert E. , Bergmann HW. :Surface Treatments of Metals with Excimer Laser 9th Int. Con. Laser '89 Schubert E. , Bergmann HW. :The Influence of Exposure Time, Wavelength and Repetition Rate on the Qualitiy of Surface Treatments of Metals with Excimer Lasers Opto-Elektronik-Magazin 5 1989 ), p. 334 ISSN: 0930-9713 Schubert E. , Bergmann HW. , Rosiwal S. , Barton G. , Richter KE. :Metallurgical Aspects of Surface Treatments with Excimer Lasers 21st Int. Symp. on Automotive Technology and Automation '89 (Wiesbaden In: Proc. of 21st ISATA '89 1989 Schubert E. , Rosiwal S. , Bergmann HW. :Möglichkeiten der Differenzreflektometrie bei der Entwicklung einer optischen on-line Qualitätskontrolle für die Materialbearbeitung mit dem Excimerlaser Opto-Elektronik-Magazin 5 1989 ), p. 334-343 ISSN: 0930-9713 Zwicker HU. :Untersuchungen zur Herstellung von Kupfer und Kupferlegierungen im Bereich des östlichen Mittelmeeres (3500-1000 v. Chr.) Int. Symp. on Old World Archeaometallurgy (Heidelberg 5. October 1987 - 7. October 1987 )In: Proc. of Int. Symp. on Old World Archeaometallurgy 1989 Zwicker HU. , Holzwarth U. :Production of materials with low elastic modulus by sintering of Titanium alloys EUROMAT '89 (Aachen Zwicker HU. , Malter R. , Nigge K. , Bauer D. :Kupferlegierungen als Werkstoffe zur Herstellung von supraleitenden Kupraten Metall 43 1989 ), p. 18-21 ISSN: 0026-0746
1988
Bergmann HW. :Beschreibung von Temperaturfeldern bei der Wärmebehandlung mit einem CO2-Laser (Teil 2) Maschinenmarkt 9 1988 ), p. 62 ISSN: 0341-5775 Bergmann HW. :Laser hardening Int. Foundry and Heat Treatment Conf. (Johannesburg In: Proc. Day 1 of the Int. Foundry and Heat Treatment Conf. 1988 Bergmann HW. , Geissler E. :3D Temperature Fields in Laser Transformation Hardening. Part I: Quai-Stationary Fields Opto-Elektronik-Magazin 4 1988 )ISSN: 0930-9713 Bergmann HW. , Geissler E. :Beschreibung von Temperaturfeldern bei der Wärmebehandlung mit einem CO2-Laser (Teil 1) Maschinenmarkt 7 1988 ), p. 40 ISSN: 0341-5775 Bergmann HW. , Geissler E. :Beschreibung von Temperaturfeldern bei Oberflächenbehandlungen mit einem CO2-Laser Maschinenmarkt 94 1988 ), p. 40 ISSN: 0341-5775 Bergmann HW. , Geissler E. :On-line computer controlled laser hardening ECLAT 2 (Bad Nauheim In: Proc. of the ECLAT 2 1988 Bergmann HW. , Juckenath B. , Cantello M. :Laser welding of cp-Ti and TiAl6V4 Laser 4 (Paris 17. March 1988 - 18. March 1988 )In: Laser 4, Proceedings of the 4th International Conference 1988 Bergmann HW. , Juckenath B. , Lee SZ. :Surface Treatments with Excimer Lasers ECLAT '88 (Bad Nauheim 13. October 1988 - 14. October 1988 )In: Proc. ECLAT '88 1988 Bergmann HW. , Juckenath B. , Lee SZ. , Geissler E. :Comparison of Surface Treatments with Different Lasers (Excimer, Nd:YAG, CO2) LIM-5 (Stuttgart 13. September 1988 - 15. September 1988 )In: Proc. of LIM-5 1988 Bergmann HW. , Lee SZ. :Laser hardfacing by melt bath reactions Laser 4 (Paris In: FBM Vol. 65, No. 3 1988 Bergmann HW. , Lee SZ. , Breme J. :Laser Hardfacing by Melt Bath Reaction ECLAT 2 (Bad Nauheim In: Proc. of ECLAT 2 1988 Bergmann HW. , Lee SZ. , Geissler E. :On-line computer conntrolled laser hardening LIM-5 (Stuttgart 13. September 1988 - 15. September 1988 )In: Proc. of LIM-5 1988 Bergmann HW. , Lee SZ. , Juckenath B. :Behandlung von Metallen mit einem Excimer-Laser Opto-Elektronik-Magazin 4 1988 ), p. 380 ISSN: 0930-9713 Bergmann HW. , Vetter J. , Cai Q. :Die Erzeugung von Metallpulvern durch Verdüsung ihrer Schmelzen mit flüssigen Gasen 26 1988 ), p. 985 Breme J. :Titanium and Titanium Alloys, Biomaterials of Preference Sixth World Conference on Ti (Cannes 