Körner, Carolin
Prof. Dr.-Ing. habil. Carolin Körner
Ordinaria
Martensstraße 5
91058 Erlangen
Chair of Materials Science and Engineering for Metals
Room: Room 215Martensstraße 5
91058 Erlangen
- Phone number: +49 9131 85-27528
- Fax number: +49 9131 85-27515
- Email: carolin.koerner@fau.de
Functions
- Head of the Chair WTM
- Member of the control board of the Central Institute of New Materials and Processes ZMP, Fürth
- Scientific head of the division Additive Manufacturing at New Materials Fürth, Ltd.
Top-Publications
- , , :
A multi-component evaporation model for beam melting processes
In: Modelling and Simulation in Materials Science and Engineering 25 (2017), Article No.: 025003
ISSN: 1361-651X
DOI: 10.1088/1361-651X/aa5289
- , , :
Simulation of grain structure evolution during powder bed based additive manufacturing
In: Additive Manufacturing 13 (2017), p. 124-134
ISSN: 2214-7810
DOI: 10.1016/j.addma.2016.10.007
- :
Additive manufacturing of metallic components by selective electron beam melting - A review
In: International Materials Reviews 61 (2016), p. 361-377
ISSN: 0308-4590
DOI: 10.1080/09506608.2016.1176289
- , , :
Fundamental consolidation mechanisms during selective beam melting of powders
In: Modelling and Simulation in Materials Science and Engineering 21 (2013), Article No.: 085011
ISSN: 0965-0393
DOI: 10.1088/0965-0393/21/8/085011
- , , , , :
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
In: Acta Biomaterialia 4 (2008), p. 1536-1544
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2008.03.013
Publications
2023
- , :
Comparison between nitriding behavior of Mo-Ti and Mo-V alloys
In: International Journal of Refractory Metals & Hard Materials 112 (2023), Article No.: 106126
ISSN: 0263-4368
DOI: 10.1016/j.ijrmhm.2023.106126 - , , :
In-situ quality assurance for electron-based additive manufacturing by electron optical observation
In: Progress in Additive Manufacturing 8 (2023), p. 55-60
ISSN: 2363-9512
DOI: 10.1007/s40964-022-00382-8 - , , , , , , , :
Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe-Based alpha/alpha '/alpha '' Superalloy
In: Advanced Engineering Materials (2023)
ISSN: 1438-1656
DOI: 10.1002/adem.202201652 - , , , , , , , :
A Novel Window into Angiogenesis — Intravital Microscopy in the AV-Loop-Model
In: Cells 12 (2023), Article No.: 261
ISSN: 2073-4409
DOI: 10.3390/cells12020261
2022
- , , , , , , , :
Gaseous nitriding of Co-10 at% and -15 at% Cr alloys at 400 °C and 450 °C
In: Journal of Alloys and Compounds 907 (2022)
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2022.164535 - , :
Electron-optical in-situ metrology for electron beam powder bed fusion: calibration and validation
In: Measurement Science & Technology 33 (2022), Article No.: 014001
ISSN: 0957-0233
DOI: 10.1088/1361-6501/ac2d5c - , , , , , , , , :
Very high cycle fatigue durability of an additively manufactured single-crystal Ni-based superalloy
In: Additive Manufacturing 54 (2022), Article No.: 102759
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.102759 - , , , :
Basic Mechanism of Surface Topography Evolution in Electron Beam Based Additive Manufacturing
In: Materials 15 (2022), Article No.: 4754
ISSN: 1996-1944
DOI: 10.3390/ma15144754 - , , , , , :
Electron-optical in-situ crack monitoring during electron beam powder bed fusion of the Ni-Base superalloy CMSX-4
In: Progress in Additive Manufacturing (2022)
ISSN: 2363-9512
DOI: 10.1007/s40964-022-00357-9 - , , :
Correlation of powder degradation, energy absorption and gas pore formation in laser-based powder bed fusion process of AlSi10Mg0.4
In: Additive Manufacturing 56 (2022)
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.102917 - , , , :
A novel approach for powder bed-based additive manufacturing of compositionally graded composites
In: Additive Manufacturing 56 (2022), Article No.: 102916
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.102916 - , , , , :
Miniature mechanical testing of LMD-fabricated compositionally & microstructurally graded γ titanium aluminides
In: Journal of Materials Research (2022)
ISSN: 0884-2914
DOI: 10.1557/s43578-022-00801-0 - , , , :
Fluidization behavior of graphitized glassy particles in a fluidized carbon bed cooling process for investment casting
In: Particuology 65 (2022), p. 32-38
ISSN: 1674-2001
DOI: 10.1016/j.partic.2021.07.001 - , , :
In-situ Al3Ti particle reinforcement for stiff aluminum die castings
In: Journal of Alloys and Compounds (2022), Article No.: 163984
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2022.163984 - , , , , , , , , , :
Practically applicable water oxidation electrodes from 3D-printed Ti6Al4V scaffolds with surface nanostructuration and iridium catalyst coating
In: Electrochimica Acta 417 (2022), p. 140308
ISSN: 0013-4686
DOI: 10.1016/j.electacta.2022.140308 - , , , , , , , :
In-situ synchrotron X-ray analysis of metal Additive Manufacturing: Current state, opportunities and challenges
In: Materials and Design 219 (2022), Article No.: 110790
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2022.110790 - , , , :
In-situ aluminum control for titanium aluminide via electron beam powder bed fusion to realize a dual microstructure
In: Additive Manufacturing 59 (2022)
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.103132 - , , , , :
Microstructure analysis and mechanical properties of electron beam powder bed fusion (PBF-EB)-manufactured gamma-titanium aluminide (TiAl) at elevated temperatures
In: MP Materials Testing 64 (2022), p. 636-646
ISSN: 0025-5300
DOI: 10.1515/mt-2021-2137 - , , , , , , , , , , :
Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA III
In: Review of Scientific Instruments 93 (2022)
ISSN: 0034-6748
DOI: 10.1063/5.0077105 - , , , , , , :
Microstructural evolution and mechanical properties in Zr–Cu–Al–Nb bulk metallic glass composites prepared by laser metal deposition
In: Intermetallics 140 (2022), Article No.: 107393
ISSN: 0966-9795
DOI: 10.1016/j.intermet.2021.107393 - , , , , , , , , , , :
Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 (2022), Article No.: 143405
ISSN: 0921-5093
DOI: 10.1016/j.msea.2022.143405 - , , , , :
On stabilizing an α/α′/α″ microstructure in ferritic superalloys
In: Journal of Alloys and Compounds 911 (2022), Article No.: 164996
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2022.164996 - , , , :
Influence of the microstructural homogeneity on the high-temperature oxidation behavior of a single crystalline Ni-base superalloy
In: Scripta Materialia 207 (2022), Article No.: 114301
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2021.114301 - , , , , , :
3D-Printed Raney-Cu POCS as Promising New Catalysts for Methanol Synthesis
In: Catalysts 12 (2022)
ISSN: 2073-4344
DOI: 10.3390/catal12101288 - , , , :
Impact of the Power-Dependent Beam Diameter during Electron Beam Additive Manufacturing: A Case Study with γ-TiAl
In: Applied Sciences 12 (2022), Article No.: 11300
ISSN: 2076-3417
DOI: 10.3390/app122111300 - , , , :
Surface topographies from electron optical images in electron beam powder bed fusion for process monitoring and control
In: Additive Manufacturing 60 (2022), Article No.: 103172
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.103172 - , , , , , , , , :
Impact of Endothelial Progenitor Cells in the Vascularization of Osteogenic Scaffolds
In: Cells 11 (2022), Article No.: 926
ISSN: 2073-4409
DOI: 10.3390/cells11060926 - , , , , , , , :
Microvascular development in the rat arteriovenous loop model in vivo-A step by step intravital microscopy analysis
In: Journal of Biomedical Materials Research Part A (2022)
ISSN: 1549-3296
DOI: 10.1002/jbm.a.37395 - , , , , :
Development of a Material Extrusion Additive Manufacturing Process of 1.2083 steel comprising FFF Printing, Solvent and Thermal Debinding and Sintering
21st CIRP Conference on Electro Physical and Chemical Machining, CIRP ISEM XXI 2022 (Zurich, 14. June 2022 - 16. June 2022)
In: Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.09.140 - , , , , , , , , , :
Numerical Design of CoNi-Base Superalloys With Improved Casting Structure
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
ISSN: 1073-5623
DOI: 10.1007/s11661-022-06870-4 - , , , , :
Electron beam-based additive manufacturing of Fe93.5Si6.5 (wt.%) soft magnetic material with controllable magnetic performance
In: Scripta Materialia 210 (2022), Article No.: 114460
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2021.114460 - , , :
Predictive simulation of bulk metallic glass crystallization during laser powder bed fusion
In: Additive Manufacturing 59 (2022), Article No.: 103121
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.103121 - , , , , , , , :
Evolution of an industrial-grade Zr-based bulk metallic glass during multiple laser beam melting
In: Journal of Non-Crystalline Solids 589 (2022), Article No.: 121649
ISSN: 0022-3093
DOI: 10.1016/j.jnoncrysol.2022.121649
2021
- , , , , , :
Anisotropic nitriding behavior upon formation of expanded hcp in Co-Cr alloys
In: Scripta Materialia 203 (2021)
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2021.114041 - , , :
Electron-Optical In Situ Imaging for the Assessment of Accuracy in Electron Beam Powder Bed Fusion
In: Materials 14 (2021), Article No.: 7240
ISSN: 1996-1944
DOI: 10.3390/ma14237240 - , :
In-situ electron optical measurement of thermal expansion in electron beam powder bed fusion
In: Additive Manufacturing 46 (2021)
ISSN: 2214-7810
DOI: 10.1016/j.addma.2021.102213 - , , , :
A multivariate meltpool stability criterion for fabrication of complex geometries in electron beam powder bed fusion
In: Additive Manufacturing 45 (2021), Article No.: 102051
ISSN: 2214-7810
DOI: 10.1016/j.addma.2021.102051 - , , , , :
Effect of AlSi10Mg0.4 long-term reused powder in PBF-LB/M on the mechanical properties
In: Materials & Design 212 (2021), Article No.: 110176
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2021.110176 - , , , , , , , :
Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys
In: Metals 11 (2021), Article No.: 1707
ISSN: 2075-4701
DOI: 10.3390/met11111707 - , , , , , , , , , :
Watching the Vessels Grow: Establishment of Intravital Microscopy in the Arteriovenous Loop Rat Model
In: Tissue Engineering - Part C: Methods 27 (2021), p. 357-365
ISSN: 1937-3384
DOI: 10.1089/ten.tec.2021.0024 - , , , , , , :
Thermoelastic properties and γ’-solvus temperatures of single-crystal Ni-base superalloys
In: Journal of Materials Science (2021)
ISSN: 0022-2461
DOI: 10.1007/s10853-020-05628-w - , , , , , , , , :
Personalized medicine for reconstruction of critical-size bone defects – a translational approach with customizable vascularized bone tissue
In: npj Regenerative Medicine 6 (2021), Article No.: 49
ISSN: 2057-3995
DOI: 10.1038/s41536-021-00158-8 - , , , , , :
A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials
In: Journal of Materials Engineering and Performance (2021)
ISSN: 1059-9495
DOI: 10.1007/s11665-021-05725-0 - , , , :
Multi-material model for the simulation of powder bed fusion additive manufacturing
In: Computational Materials Science 194 (2021)
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2021.110415 - , , , , , :
A novel rapid alloy development method towards powder bed additive manufacturing, demonstrated for binary Al-Ti, -Zr and -Nb alloys
In: Materials & Design 211 (2021)
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2021.110129 - , :
A novel mechanism to generate metallic single crystals
In: Scientific Reports 11 (2021)
ISSN: 2045-2322
DOI: 10.1038/s41598-021-04235-2 - , , , , :
New grain formation mechanisms during powder bed fusion
In: Materials 14 (2021), Article No.: 3324
ISSN: 1996-1944
DOI: 10.3390/ma14123324 - , , , , , , :
Degradation of AlSi10Mg powder during laser based powder bed fusion processing
In: Materials and Design 198 (2021), Article No.: 109358
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2020.109358 - , , , , , , , , :
Free Transplantation of a Tissue Engineered Bone Graft into an Irradiated, Critical-Size Femoral Defect in Rats
In: Cells 10 (2021)
ISSN: 2073-4409
DOI: 10.3390/cells10092256 - , , , , , , , :
Automatised quality assessment in additive layer manufacturing using layer-by-layer surface measurements and deep learning
14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2020 (Naples, ITA, 15. July 2020 - 17. July 2020)
In: Roberto Teti, Doriana M. D'Addona (ed.): Procedia CIRP 2021
DOI: 10.1016/j.procir.2021.03.050 - , , , , , , , , , :
A scale-bridging study of the influence of TCP phases on the mechanical properties of an additive manufactured Ni-base superalloy combining microcompression testing, X-ray nanotomography and TEM
In: Microscopy and Microanalysis 27 (2021), p. 938-942
ISSN: 1431-9276
DOI: 10.1017/S1431927621003603 - , , :
Heat treatment of high-pressure die casting Al-Mg-Si-Mn-Zn alloys
In: Journal of Alloys and Compounds (2021)
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2021.159692 - , , , , , , :
In‐situ Observation of γ' Phase Transformation Dynamics during Selective Laser Melting of CMSX‐4
In: Advanced Engineering Materials (2021)
ISSN: 1438-1656
DOI: 10.1002/adem.202100112 - , , :
Electron Beam Wire Cladding of Nickel Alloys and Stainless Steel on a Reactor Pressure Vessel Steel
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing (2021)
ISSN: 0921-5093
DOI: 10.1016/j.msea.2021.141082 - , , , :
Numerical Alloy Development for Additive Manufacturing towards Reduced Cracking Susceptibility
In: Crystals 11 (2021)
ISSN: 2073-4352
DOI: 10.3390/cryst11080902 - , , , , , , , , :
How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted γ-TiAl based alloy
In: Materials & Design 212 (2021), Article No.: 110187
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2021.110187 - , , , :
Comparison of Transmission Measurement Methods of Elastic Waves in Phononic Band Gap Materials
In: Materials (2021)
ISSN: 1996-1944
DOI: 10.3390/ma14051133 - , , , , , :
Isothermal crystallization kinetics of an industrial-grade Zr-based bulk metallic glass
In: Journal of Non-Crystalline Solids 573 (2021), Article No.: 121145
ISSN: 0022-3093
DOI: 10.1016/j.jnoncrysol.2021.121145 - , , , :
Modeling laser beam absorption of metal alloys at high temperatures for selective laser melting
In: Advanced Engineering Materials 23 (2021), Article No.: 2100137
ISSN: 1438-1656
DOI: 10.1002/adem.202100137
2020
- , , :
Electron beam based additive manufacturing of Fe3Al based iron aluminides – Processing window, microstructure and properties
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 785 (2020), Article No.: 139369
ISSN: 0921-5093
DOI: 10.1016/j.msea.2020.139369 - , , , :
Microstructure and properties of TiAl processed via an electron beam powder bed fusion capsule technology
In: Intermetallics 126 (2020), Article No.: 106929
ISSN: 0966-9795
DOI: 10.1016/j.intermet.2020.106929 - , , , , , , :
Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting
In: Scientific Reports 10 (2020), Article No.: 15153
ISSN: 2045-2322
DOI: 10.1038/s41598-020-72093-5 - , , :
Fabrication of Single Crystals through a µ-Helix Grain Selection Process during Electron Beam Metal Additive Manufacturing
In: Metals (2020)
ISSN: 2075-4701
DOI: 10.3390/met10030313 - , , , , , , :
Small scale testing of IN718 single crystals manufactured by EB-PBF
In: Additive Manufacturing 36 (2020), Article No.: 101449
ISSN: 2214-7810
DOI: 10.1016/j.addma.2020.101449 - , , , :
Effect of the oxygen content of pure copper powder on selective electron beam melting
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 779 (2020), Article No.: 139106
ISSN: 0921-5093
DOI: 10.1016/j.msea.2020.139106 - , , , , , , , , , , , :
Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
In: Measurement Science and Technology 31 (2020), p. 1-14
ISSN: 1361-6501
DOI: 10.1088/1361-6501/ab89e2 - , , , , , :
Additively manufactured Raney-type Copper catalyst for methanol synthesis
In: Catalysis: Science and Technology 10 (2020), p. 164-168
ISSN: 2044-4753
DOI: 10.1039/C9CY01657K - , , :
Formation kinetics and phase stability of in-situ Al3Ti particles in aluminium casting alloys with varying Si content
In: Results in Materials (2020)
ISSN: 2590-048X
DOI: 10.1016/j.rinma.2020.100103 - , , , , , , , , , :
Exploring the fundamentals of Ni-based superalloy single crystal (SX) alloy design: Chemical composition vs. microstructure
In: Materials & Design 195 (2020), Article No.: 108976
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.108976 - , , , , , , , , , , :
On the Influence of Alloy Composition on Creep Behavior of Ni-Based Single-Crystal Superalloys (SXs)
14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA, 12. September 2021 - 16. September 2021)
In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (ed.): Minerals, Metals and Materials Series 2020
DOI: 10.1007/978-3-030-51834-9_6 - , , :
Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
ISSN: 1073-5623
DOI: 10.1007/s11661-020-05946-3 - , , , , , :
Digital Twin-enabled Collaborative Data Management for Metal Additive Manufacturing Systems
In: Journal of Manufacturing Systems (2020)
ISSN: 0278-6125
DOI: 10.1016/j.jmsy.2020.05.010 - , , , , , , , :
Preparation of Fe-Co-B-Si-Nb bulk metallic glasses by laser powder bed fusion: Microstructure and properties
In: Materials Characterization 162 (2020), Article No.: 110206
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2020.110206 - , , , , :
Multi-alloying effect of Sc, Zr, Cr on the Al-Mg-Si-Mn high-pressure die casting alloys
In: Materials Characterization 168 (2020)
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2020.110537 - , , , , :
New grain formation by constitutional undercooling due to remelting of segregated microstructures during powder bed fusion
In: Materials 13 (2020), p. 1-14
ISSN: 1996-1944
DOI: 10.3390/ma13235517 - , , , :
Processing 4th generation titanium aluminides via electron beam based additive manufacturing – characterization of microstructure and mechanical properties
In: Materialia 14 (2020), Article No.: 100902
ISSN: 2589-1529
DOI: 10.1016/j.mtla.2020.100902 - , , , , :
Secondary Recrystallization of Nickel-Base Superalloy CM 247 LC After Processing by Metal Injection Molding
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
ISSN: 1073-5623
DOI: 10.1007/s11661-020-06087-3 - , , , , :
Heat treatment of the new high-strength high-ductility Al–Mg–Si–Mn alloys with Sc, Zr and Cr additions
In: Materialia 15 (2020), Article No.: 100981
ISSN: 2589-1529
DOI: 10.1016/j.mtla.2020.100981 - , , , , , , , , , , :
Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model
In: Tissue Engineering - Part A (2020)
ISSN: 1937-335X
DOI: 10.1089/ten.tea.2020.0087 - , , , , , , , :
Periodic open cellular Raney-Copper-Catalysts fabricated via selective electron beam melting
In: Advanced Engineering Materials (2020)
ISSN: 1438-1656
DOI: 10.1002/adem.201901524 - , , , :
Processing of in situ Al3Ti/Al composites by advanced high shear technology: influence of mixing speed
In: International Journal of Advanced Manufacturing Technology 110 (2020), p. 1589-1599
ISSN: 0268-3768
DOI: 10.1007/s00170-020-05956-w
2019
- , , :
In Operando Monitoring by Analysis of Backscattered Electrons during Electron Beam Melting
In: Advanced Engineering Materials 22 (2019), Article No.: 1901102
ISSN: 1438-1656
DOI: 10.1002/adem.201901102 - , , , , :
Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 762 (2019), Article No.: 138098
ISSN: 0921-5093
DOI: 10.1016/j.msea.2019.138098 - , , :
Impact of build envelope on the properties of additive manufactured parts from AlSi10Mg
In: Optics and Laser Technology 111 (2019), p. 51-57
ISSN: 0030-3992
DOI: 10.1016/j.optlastec.2018.08.050 - , , , , :
Additive manufacturing meets reaction engineering - Novel Raney® copper catalyst structures for methanol synthesis
2019 DGMK International Conference on Circular Economy - A Fresh View on Petrochemistry (Dresden, DEU, 9. October 2019 - 11. October 2019)
In: H. Blanke, H. Hager, A. Jess, J. A. Lercher, M. Marchionna, D. Vogt, M. Bender (ed.): DGMK Tagungsbericht 2019 - , , , , , :
Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
In: Computational Materials Science 162 (2019), p. 148-155
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2019.03.004 - , , , , , , , , :
3D Printed Copper Waveguides by Selective Electron Beam Melting Process for E-Band
EuMW 2019 (Paris)
DOI: 10.23919/EuMC.2019.8910893 - , , , :
SAMPLE: A Software Suite to Predict Consolidation and Microstructure for Powder Bed Fusion Additive Manufacturing
In: Advanced Engineering Materials (2019), Article No.: 1901270
ISSN: 1438-1656
DOI: 10.1002/adem.201901270 - , , , , , , , , :
Effect of heat treatment on the high temperature fatigue life of single crystalline nickel base superalloy additively manufactured by means of selective electron beam melting
In: Scripta Materialia 168 (2019), p. 124-128
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2019.05.002 - , , , , , , , :
MultOpt++: a fast regression-based model for the development of compositions with high robustness against scatter of element concentrations
In: Modelling and Simulation in Materials Science and Engineering 27 (2019)
ISSN: 0965-0393
DOI: 10.1088/1361-651X/aaf0b8 - , , , , , , :
MultOpt++: a fast regression-based model for the constraint violation fraction due to composition uncertainties
In: Modelling and Simulation in Materials Science and Engineering 27 (2019)
ISSN: 0965-0393
DOI: 10.1088/1361-651X/aaf01e - , :
Formation of topologically closed packed phases within CMSX-4 single crystals produced by additive manufacturing
In: Materials Letters 1 (2019)
ISSN: 0167-577X
DOI: 10.1016/j.mlblux.2019.100003 - , , , , :
Immediate development of processing windows for selective electron beam melting using layerwise monitoring via backscattered electron detection
In: Materials Letters 249 (2019), p. 70 - 72
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2019.03.048 - , , , , :
Processing windows for Ti-6Al-4V fabricated by selective electron beam melting with improved beam focus and different scan line spacings
In: Rapid Prototyping Journal 25 (2019), p. 665-671
ISSN: 1355-2546
DOI: 10.1108/RPJ-04-2018-0084 - , , , , :
Advanced process strategy to realize microducts free of powder using selective electron beam melting
In: International Journal of Advanced Manufacturing Technology (2019)
ISSN: 0268-3768
DOI: 10.1007/s00170-019-03615-3 - , , , , :
Effect of Zr, Cr and Sc on the Al–Mg–Si–Mn high-pressure die casting alloys
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing (2019)
ISSN: 0921-5093
DOI: 10.1016/j.msea.2019.05.038 - , , , , , , , , , , :
Grain Structure Evolution of Al–Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties
In: Materials 13 (2019)
ISSN: 1996-1944
DOI: 10.3390/ma13010082 - , , , :
Improvement of the high-pressure die casting alloy Al-5.7Mg-2.6Si-0.7Mn with Zn addition
In: Materials Characterization 158 (2019)
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2019.109959 - , , , , , , :
Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions
In: Acta Materialia (2019)
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2019.08.049 - , :
Sensor-based Observation and Numerical Simulation of Mold Filling During High Pressure Die Casting
In: Giesserei (2019), p. 18-25
ISSN: 0016-9765 - , , :
Selective electron beam melting of an aluminum bronze: Microstructure and mechanical properties
In: Materials Letters 238 (2019), p. 241-244
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2018.12.015 - , , , :
In situ Al3Ti/Al composites fabricated by high shear technology: microstructure and mechanical properties
In: Materials Science and Technology 35 (2019), p. 2294-2303
ISSN: 0267-0836
DOI: 10.1080/02670836.2019.1677025
2018
- , , , :
Layerwise monitoring of electron beam melting via backscatter electron detection
In: Rapid Prototyping Journal 24 (2018), p. 1401 - 1406
ISSN: 1355-2546
DOI: 10.1108/RPJ-02-2018-0034 - , , , :
Process development of 99.95% pure copper processed via selective electron beam melting and its mechanical and physical properties
In: Materials Characterization (2018)
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2018.04.009 - , , , , , , , , , :
Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
iCAT 2018 (Maribor, 10. October 2018 - 11. October 2018)
In: Proceedings of 7th International Conference on Additive Technologies 2018 - , , , , , :
Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications
In: Additive Manufacturing 22 (2018), p. 118-126
ISSN: 2214-7810
DOI: 10.1016/j.addma.2018.05.008 - , , , :
3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
In: Acta Materialia 152 (2018), p. 119-126
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2018.04.030 - , , , , , :
3D grain growth simulation and experimental verification in laser beam melting of IN718
10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth, 4. September 2018 - 6. September 2018)
In: Procedia CIRP 74 (2018) 2018
Open Access: https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf
URL: https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf - , , , , , , :
Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49 (2018), p. 3781-3792
ISSN: 1073-5623
DOI: 10.1007/s11661-018-4762-5 - , , , :
Comparison of passive scalar transport models coupled with the Lattice Boltzmann method
In: Computers & Mathematics with Applications (2018)
ISSN: 0898-1221
DOI: 10.1016/j.camwa.2018.01.017 - , :
Powder layer deposition algorithm for additive manufacturing simulations
In: Powder Technology 330 (2018), p. 125-136
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.02.026 - , , , , , , , , , , , , , , , , :
Development of Single-Crystal Ni-Base Superalloys Based on Multi-criteria Numerical Optimization and Efficient Use of Refractory Elements
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), p. 4134-4145
ISSN: 1073-5623
DOI: 10.1007/s11661-018-4759-0 - , , , :
Selective electron beam melting of a copper-chrome powder mixture
In: Materials Letters 223 (2018), p. 250-252
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2018.03.194 - , , , , , , , :
Crushing Behavior of Graded Auxetic Structures Built from Inverted Tetrapods under Impact
In: physica status solidi (b) (2018)
ISSN: 0370-1972
DOI: 10.1002/pssb.201800040 - , , , , , :
Modeling of Laser Beam Absorption in a Polymer Powder Bed
In: Polymers 10 (2018)
ISSN: 2073-4360
DOI: 10.3390/polym10070784 - , , :
Selective Electron Beam Melting of Oxide Dispersion Strengthened Copper
In: Advanced Engineering Materials 20 (2018)
ISSN: 1438-1656
DOI: 10.1002/adem.201800068 - , , :
Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution
In: Computers & Mathematics with Applications (2018)
ISSN: 0898-1221
DOI: 10.1016/j.camwa.2018.06.029 - , , , , , , , :
Effects of Solid Solution Strengthening Elements Mo, Re, Ru, and W on Transition Temperatures in Nickel-Based Superalloys with High γ′-Volume Fraction: Comparison of Experiment and CALPHAD Calculations
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2018)
ISSN: 1073-5623
DOI: 10.1007/s11661-018-4730-0 - , , , :
Optimization of Mechanical Properties of Al–Al‐Compound Castings by Adapted Heat Treatment
In: Advanced Engineering Materials (2018)
ISSN: 1438-1656
DOI: 10.1002/adem.201800400 - , , , , :
High-Volume Production-Compatible Technologies for Light Metal and Fiber Composite-Based Components with Integrated Piezoceramic Sensors and Actuators
In: Advanced Engineering Materials 20 (2018), Article No.: 1801001
ISSN: 1438-1656
DOI: 10.1002/adem.201801001 - , , :
Mechanische zellulare Metamaterialien aus Metall durch Selektives Elektronenstrahlschmelzen
In: DGM (ed.): Materialwissenschaft und Werkstofftechnik:
Zellulare Werkstoffe · Zellulare Materialien, 2018, p. 16-24 (Dialog, Vol.2/2018) - , , , :
Microstructures and Mechanical Properties of Al3Ti/Al Composites Produced In Situ by High Shearing Technology
In: Advanced Engineering Materials (2018)
ISSN: 1438-1656
DOI: 10.1002/adem.201800259
2017
- , , , , , , , , , , , :
Pedicled Transplantation of Axially Vascularized Bone Constructs in a Critical Size Femoral Defect
In: Tissue Engineering: Parts A, B, and C (2017)
ISSN: 1937-3368
DOI: 10.1089/ten.tea.2017.0110 - , , , , , , , , :
Electrophoretic Deposition of Boehmite on Additively Manufactured, Interpenetrating Periodic Open Cellular Structures for Catalytic Applications
In: Industrial & Engineering Chemistry Research 56 (2017), p. 13403-13411
ISSN: 0888-5885
DOI: 10.1021/acs.iecr.7b02453 - , , , :
Single Crystal Casting with Fluidized Carbon Bed Cooling: A Process Innovation for Quality Improvement and Cost Reduction
In: Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science 48 (2017), p. 3132-3142
ISSN: 1073-5615
DOI: 10.1007/s11663-017-1110-x - , , , :
Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl
In: Journal of Materials Processing Technology 247 (2017), p. 280-288
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2017.04.016 - , , :
A multi-component evaporation model for beam melting processes
In: Modelling and Simulation in Materials Science and Engineering 25 (2017), Article No.: 025003
ISSN: 1361-651X
DOI: 10.1088/1361-651X/aa5289 - , , :
3D multilayer grain structure simulation for beam-based additive manufacturing
2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, DEU, 11. October 2017 - 13. October 2017)
In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017 - , , , :
Additive Fertigung durch selektives Elektronenstrahlschmelzen
In: Schweissen und Schneiden (2017), p. 30-39
ISSN: 0036-7184 - , , , :
Additive manufacturing using selective electron beam melting
In: Welding and Cutting (2017), p. 177-184
ISSN: 1612-3433 - , , , , :
Predictive numerical simulations of processing windows for powder bed based additive manufacturing
2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, 11. October 2017 - 13. October 2017)
In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017 - , , :
Simulation of grain structure evolution during powder bed based additive manufacturing
In: Additive Manufacturing 13 (2017), p. 124-134
ISSN: 2214-7810
DOI: 10.1016/j.addma.2016.10.007 - , , , , :
Predictive Simulation of Process Windows for Powder Bed Fusion Additive Manufacturing: Influence of the Powder Bulk Density
In: Materials 10 (2017)
ISSN: 1996-1944
DOI: 10.3390/ma10101117 - , , , , , :
Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V
In: International Journal of Advanced Manufacturing Technology (2017)
ISSN: 0268-3768
DOI: 10.1007/s00170-016-8819-6
URL: http://link.springer.com/article/10.1007/s00170-016-8819-6 - , , , , , :
On the Influence of Ta and Ti on Heat-Treatability and γ/γ'-Partitioning of High W Containing Re-Free Nickel-Based Superalloys
In: Advanced Engineering Materials (2017)
ISSN: 1438-1656
DOI: 10.1002/adem.201700150 - , , :
Influence of the hatching strategy on consolidation during selective electron beam melting of Ti-6Al-4V
In: International Journal of Advanced Manufacturing Technology (2017), p. 1-10
ISSN: 0268-3768
DOI: 10.1007/s00170-017-0375-1 - , , , , , , :
A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures
In: Results in Physics (2017)
ISSN: 2211-3797
DOI: 10.1016/j.rinp.2017.07.034 - , , , , :
Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting
In: Smart Materials and Structures 26 (2017), Article No.: 025013
ISSN: 1361-665X
DOI: 10.1088/1361-665X/26/2/025013 - , , :
Single phase 3D phononic band gap material
In: Scientific Reports (2017), Article No.: 3843
ISSN: 2045-2322
DOI: 10.1038/s41598-017-04235-1 - , , :
Evolution of full phononic band gaps in periodic cellular structures
In: Applied Physics A: Solids and Surfaces (2017), Article No.: 123:661
ISSN: 0721-7250
DOI: 10.1007/s00339-017-1278-6 - , , , :
Design and Additive Manufacturing of 3D Phononic Band Gap Structures Based on Gradient Based Optimization
In: Materials 10 (2017)
ISSN: 1996-1944
DOI: 10.3390/ma10101125
2016
- , , , , :
The effect of a negative Poisson's ratio on thermal stresses in cellular metallic structures
In: Smart Materials and Structures 25 (2016), Article No.: 115038
ISSN: 1361-665X
DOI: 10.1088/0964-1726/25/11/115038 - , , , :
Erratum to: ‘Grain structure evolution in Inconel 718 during selective electron beam melting’ (Materials Science & Engineering A (2016) 668 (180–187 (S0921509316305536) (10.1016/j.msea.2016.05.046))
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 (2016)
ISSN: 0921-5093
DOI: 10.1016/j.msea.2016.09.016 - , , , :
Grain structure evolution in Inconel 718 during selective electron beam melting
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 668 (2016), p. 180-187
ISSN: 0921-5093
DOI: 10.1016/j.msea.2016.05.046 - , :
Creep properties of Ti-48Al-2Cr-2Nb produced by selective electron beam melting
3rd Conference on Powder Processing Consolidation and Metallurgy of Titanium, 2015 (Lüneburg, 31. August 2015 - 3. September 2015)
DOI: 10.4028/www.scientific.net/KEM.704.190 - , , , :
3D Grain Structure Simulation for Beam-Based Additive Manufacturing
6th International Conference on Additive Technologies iCAT (Nürnberg, 29. November 2017 - 30. November 2016)
In: Proceedings of the 6th International Conference on Additive Technologies iCAT 2016 2016 - :
Additive manufacturing of metallic components by selective electron beam melting - A review
In: International Materials Reviews 61 (2016), p. 361-377
ISSN: 0308-4590
DOI: 10.1080/09506608.2016.1176289 - , :
Selective electron beam melting of the single crystalline nickel-base superalloy CMSX-4®: From columnar grains to a single crystal
13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs, 11. September 2016 - 15. September 2016)
In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (ed.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016
DOI: 10.1002/9781119075646.ch37 - , , , :
Numerical Investigations of Selective Electron Beam Melting on the Powder Scale
Fraunhofer Direct Digital Manufacturing Conference 2016 (Berlin, 16. March 2016 - 17. March 2016)
In: Proceedings of the Fraunhofer Direct Digital Manufacturing Conference 2016 2016 - , :
Multiscale Modeling of Powder Bed-Based Additive Manufacturing
In: Annual Review of Materials Research 46 (2016), p. 93-123
ISSN: 1531-7331
DOI: 10.1146/annurev-matsci-070115-032158 - , :
Lattice Boltzmann method for Oldroyd-B fluids
In: Computers & Fluids 124 (2016), p. 190-196
ISSN: 0045-7930
DOI: 10.1016/j.compfluid.2015.08.004 - , , , , , :
Transmission electron microscopy of a CMSX-4 Ni-base superalloy produced by selective electron beam melting
In: Metals 6 (2016), Article No.: 258
ISSN: 2075-4701
DOI: 10.3390/met6110258 - , , , , :
Innovative processing strategies for selective electron beam melting: Influence of scan line spacings on composition of Ti-6Al-4V and microstructure of IN718
6th International Conference on Additive Technologies iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings of 6th International Conference on Additive Technologies, Ljubljana: 2016 - , , , :
Thermal and Electrical Conductivity of 99.9% Pure Copper Processed via Selective Electron Beam Melting
In: Advanced Engineering Materials 18 (2016), p. 1661-1666
ISSN: 1438-1656
DOI: 10.1002/adem.201600078 - , , :
A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing
In: Computational Materials Science 124 (2016), p. 37-48
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2016.07.005 - , , :
Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 (2016), p. 1469-1480
ISSN: 1073-5623
DOI: 10.1007/s11661-015-3300-y - , , , , , :
Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting
In: Materials and Design 110 (2016), p. 720-727
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2016.08.041 - , , :
Wrought Al - Cast Al compound casting based on zincate treatment for aluminum wrought alloy inserts
In: Journal of Materials Processing Technology 238 (2016), p. 160-168
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2016.07.001 - , , , , , , :
Fabrication and pressure drop behavior of novel monolithic structures with zeolitic architectures
In: Chemical Engineering Journal 288 (2016), p. 223-227
ISSN: 1385-8947
DOI: 10.1016/j.cej.2015.11.104
2015
- , , , , , , , , , , :
Combination of BMP2 and MSCs Significantly Increases Bone Formation in the Rat Arterio-Venous Loop Model
In: Tissue Engineering - Part A 21(1-2) (2015), p. 96-105
ISSN: 1937-335X
DOI: 10.1089/ten.tea.2014.0028
URL: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4293096/ - , , , , , :
Evaluation of polarisation state of light metal embedded piezoelectrics
In: Advances in Applied Ceramics 114 (2015), p. 226-230
ISSN: 1743-6753
DOI: 10.1179/1743676114Y.0000000222 - , :
A systematic approach to identify cellular auxetic materials
In: Smart Materials and Structures 24 (2015), Article No.: 025013
ISSN: 1361-665X
DOI: 10.1088/0964-1726/24/2/025013 - , :
Phononic band gaps in 2D quadratic and 3D cubic cellular structures
In: Materials 8 (2015), p. 8327-8337
ISSN: 1996-1944
DOI: 10.3390/ma8125463 - , , :
Process development for the manufacturing of 99.94% pure copper via selective electron beam melting
In: Materials Letters 143 (2015), p. 298-301
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2014.12.105 - , , , :
Numerical investigations on hatching process strategies for powder-bed-based additive manufacturing using an electron beam
In: International Journal of Advanced Manufacturing Technology 78 (2015), p. 239-247
ISSN: 0268-3768
DOI: 10.1007/s00170-014-6594-9
URL: http://link.springer.com/article/10.1007/s00170-014-6594-9 - , :
Free surface Neumann boundary condition for the advection-diffusion lattice Boltzmann method
In: Journal of Computational Physics 301 (2015), p. 230-246
ISSN: 0021-9991
DOI: 10.1016/j.jcp.2015.08.033 - , , , , , , :
Efficient hydrogen release from perhydro-N-ethylcarbazole using catalyst-coated metallic structures produced by selective electron beam melting
In: Energy and Environmental Science 8 (2015), p. 641-649
ISSN: 1754-5692
DOI: 10.1039/c4ee03461a - , , , , , :
Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
In: Advanced Engineering Materials 17 (2015), p. 1486-1493
ISSN: 1438-1656
DOI: 10.1002/adem.201500037 - , , , :
Influence of the Scanning Strategy on the Microstructure and Mechanical Properties in Selective Electron Beam Melting of Ti-6Al-4V
In: Advanced Engineering Materials 17 (2015), p. 1573-1578
ISSN: 1438-1656
DOI: 10.1002/adem.201400542 - , , , , :
Active Vibration Damping in Structural Aluminum Die Castings via Piezoelectricity - Technology and Characterization
In: Advanced Engineering Materials 17 (2015), p. 969-975
ISSN: 1438-1656
DOI: 10.1002/adem.201400367 - , , :
Al-Al-Verbundguss mit höherfesten Knetlegierungen
In: Giesserei 102 (2015), p. 46-53
ISSN: 0016-9765
2014
- , , , , :
Simulating fast electron beam melting with a parallel thermal free surface lattice Boltzmann method
In: Computers & Mathematics with Applications 67 (2014), p. 318-330
ISSN: 0898-1221
DOI: 10.1016/j.camwa.2013.10.001
URL: http://www.sciencedirect.com/science/article/pii/S0898122113005944 - , , , , :
Validation Experiments for LBM Simulations of Electron Beam Melting
In: International Journal of Modern Physics C (2014), p. 1-9
ISSN: 0129-1831
DOI: 10.1142/S0129183114410095
URL: http://arxiv.org/pdf/1402.2440.pdf - , , :
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
In: Journal of Materials Processing Technology 214 (2014), p. 2522-2528
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2014.05.002 - , :
Mesh resolution consideration for the viability prediction of lost salt cores in the high pressure die casting process
In: Progress in Computational Fluid Dynamics 14 (2014), p. 24-30
ISSN: 1468-4349
DOI: 10.1504/PCFD.2014.059197 - , , , , , :
Aluminum integral foam castings with microcellular cores by nano-functionalization
In: Journal of Materials Science 49 (2014), p. 79-87
ISSN: 0022-2461
DOI: 10.1007/s10853-013-7668-z - , , :
Aluminum integral foams with tailored density profile by adapted blowing agents
In: Applied Physics A: Materials Science and Processing 115 (2014), p. 651-660
ISSN: 1432-0630
DOI: 10.1007/s00339-014-8377-4 - , , :
Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
In: Journal of Materials Research 29 (2014), p. 1987-1996
ISSN: 0884-2914
DOI: 10.1557/jmr.2014.192 - , , , :
Processing window and evaporation phenomena for Ti-6Al-4V produced by selective electron beam melting
In: Acta Materialia 76 (2014), p. 252-258
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2014.05.037 - , , :
Modelling of electron beam absorption in complex geometries
In: Journal of Physics D-Applied Physics 47 (2014), Article No.: 065307
ISSN: 0022-3727
DOI: 10.1088/0022-3727/47/6/065307 - , , :
Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods
In: Journal of Physics D: Applied Physics 47 (2014), Article No.: 275303
ISSN: 0022-3727
DOI: 10.1088/0022-3727/47/27/275303 - , , , , , , :
Periodic open cellular structures with ideal cubic cell geometry: Effect of porosity and cell orientation on pressure drop behavior
In: Chemical Engineering Journal 242 (2014), p. 364-378
ISSN: 1385-8947
DOI: 10.1016/j.cej.2013.12.060 - , , , :
Tailoring the grain structure of IN718 during selective electron beam melting
2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens)
DOI: 10.1051/matecconf/20141408001 - , , :
Aluminum-aluminum compound castings by electroless deposited zinc layers
In: Journal of Materials Processing Technology 214 (2014), p. 1094-1101
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2013.12.014 - , :
Phononic band gaps in periodic cellular materials
In: Advanced Engineering Materials 16 (2014), p. 328-334
ISSN: 1438-1656
DOI: 10.1002/adem.201300064 - , , , :
Melt pool dynamics during selective electron beam melting
In: Applied Physics A-Materials Science & Processing 114 (2014), p. 1303-1307
ISSN: 0947-8396
DOI: 10.1007/s00339-013-7944-4 - , , , , , , :
Active functionality of piezoceramic modules integrated in aluminum high pressure die castings
In: Sensors and Actuators A-Physical 207 (2014), p. 84-90
ISSN: 0924-4247
DOI: 10.1016/j.sna.2013.12.016 - , :
Selective electron beam melting of Ti-48Al-2Nb-2Cr: Microstructure and aluminium loss
In: Intermetallics 49 (2014), p. 29-35
ISSN: 0966-9795
DOI: 10.1016/j.intermet.2014.01.004
2013
- , , :
Core viability simulation for salt core technology in high-pressure die casting
In: International Journal of Metalcasting 7 (2013), p. 39-45
ISSN: 1939-5981
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84882430468&origin=inward - , , , , :
Maintenance of a bone collagen phenotype by osteoblast-like cells in 3D periodic porous titanium (Ti-6Al-4 V) structures fabricated by selective electron beam melting
In: Connective Tissue Research 54 (2013), p. 351-360
ISSN: 0300-8207
DOI: 10.3109/03008207.2013.822864 - , , :
Fundamental consolidation mechanisms during selective beam melting of powders
In: Modelling and Simulation in Materials Science and Engineering 21 (2013), Article No.: 085011
ISSN: 0965-0393
DOI: 10.1088/0965-0393/21/8/085011 - , , , , :
Electron beam absorption algorithms for electron beam melting processes simulated by a three-dimensional thermal free surface lattice Boltzmann method in a distributed and parallel environment
In: Procedia Computer Science 18 (2013), p. 2127-2136
ISSN: 1877-0509
DOI: 10.1016/j.procs.2013.05.383
URL: http://www.sciencedirect.com/science/article/pii/S1877050913005267 - , , , , :
Funktionsintegration durch die Kombination additiver Fertigungsprozesse mit der Blechumformung
2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung
In: Drummer, D. (ed.): 2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2013 - , , , :
The influence of sandblasting on the morphology of electroless deposited zinclayers on aluminum sheets
In: Applied Surface Science 283 (2013), p. 202-208
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2013.06.082 - , , , :
Integration of PZT-ceramic modules using hybrid structures in high pressure die casting
DOI: 10.1016/j.mspro.2013.02.020 - , , , , , , , :
Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions
In: Journal of Applied Biomaterials and Fundamental Materials 11 (2013), p. 159-166
ISSN: 2280-8000
DOI: 10.5301/JABFM.2013.10832
2012
- , , , , , , , , , :
Combination of extrinsic and intrinsic pathways significantly accelerates axial vascularization of bioartificial tissues
In: Plastic and Reconstructive Surgery 129 (2012), p. 55e-65e
ISSN: 0032-1052
DOI: 10.1097/PRS.0b013e3182361f97 - , , , , , , :
Influence of the fabrication process on the functionality of piezoceramic patch transducers embedded in aluminum die castings
In: Smart Materials & Structures 21 (2012)
ISSN: 0964-1726
DOI: 10.1088/0964-1726/21/11/115014 - , , , , , :
Process specific catalyst supports-Selective electron beam melted cellular metal structures coated with microporous carbon
In: Chemical Engineering Journal (2012), p. 725-733
ISSN: 1385-8947
DOI: 10.1016/j.cej.2011.10.009 - , , , :
Observation and numerical simulation of melt pool dynamic and beam powder interaction during selective electron beam melting
23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012 (Austin, TX)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84889688177&origin=inward - , , , , , :
Mechanical characterisation of a periodic auxetic structure produced by SEBM
In: physica status solidi (b) 249 (2012), p. 1347-1352
ISSN: 0370-1972
DOI: 10.1002/pssb.201084211 - , , :
In situ flaw detection by IR-imaging during electron beam melting
In: Rapid Prototyping Journal 18 (2012), p. 259-263
ISSN: 1355-2546
DOI: 10.1108/13552541211231572
2011
- , :
Lattice Boltzmann model for thermal free surface flows with liquid-solid phase transition
In: International Journal of Heat and Fluid Flow 32 (2011), p. 156-163
ISSN: 0142-727X
DOI: 10.1016/j.ijheatfluidflow.2010.09.006 - , , :
Aluminum integral foams with near-microcellular structure
In: Advanced Engineering Materials 13 (2011), p. 1050-1055
ISSN: 1438-1656
DOI: 10.1002/adem.201100035 - , , , , :
Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
In: Journal of Biomedical Materials Research Part B-Applied Biomaterials (2011), p. 313-320
ISSN: 1552-4973
DOI: 10.1002/jbm.b.31901 - , , , , , , :
Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing
In: Chemical Engineering Science 66 (2011), p. 2758-2763
ISSN: 0009-2509
DOI: 10.1016/j.ces.2011.03.031 - , , , , , , :
Integration of piezoceramic sensors and actuators into structural components via high pressure die casting
In: R. Neugebauer (ed.): Proceedings of the CRC/TR39 3rd Scientific Symposium "Integration of Active Functions into Structural Elements", Chemnitz: 2011 - , , :
Mesoscopic simulation of selective beam melting processes
In: Journal of Materials Processing Technology 211 (2011), p. 978-987
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2010.12.016 - , , , , , , , , :
Erratum: Finding auxetic frameworks in periodic tessellations
In: Advanced Materials 23 (2011), p. 2669-2674
ISSN: 0935-9648
DOI: 10.1002/adma.201190118 - , , , , , , , , :
Finding Auxetic Frameworks in Periodic Tessellations
In: Advanced Materials 23 (2011), p. 2669-2674
ISSN: 0935-9648
DOI: 10.1002/adma.201100268 - , , , :
Aluminium-aluminium compound fabrication by high pressure die casting
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011), p. 7024-7029
ISSN: 0921-5093
DOI: 10.1016/j.msea.2011.05.076 - , , , , , , :
Dünnwandige Aluminiumdruckgussteile mit integrierten piezokeramischen Sensoren und Aktoren - Fertigung und Charakterisierung
18. Symposium Verbundwerkstoffe und Werkstoffverbunde (Chemnitz)
In: B. Wielage (ed.): Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde 2011 - , , , , , , :
Design of Auxetic Structures via Mathematical Optimization
In: Advanced Materials 23 (2011), p. 2650--2654
ISSN: 0935-9648
DOI: 10.1002/adma.201004090
2010
- , :
Aluminiumgussteile mit zellularem Kern
In: Lightweight Design (2010), p. 28-34
ISSN: 1865-4819
DOI: 10.1007/BF03223614 - , , , , , , , , , :
In vivo performance of selective electron beam-melted Ti-6Al-4V structures
In: Journal of Biomedical Materials Research Part A 92 (2010), p. 56-62
ISSN: 1549-3296
DOI: 10.1002/jbm.a.32337 - , , , :
Auxetic cellular structures through selective electron-beam melting
In: physica status solidi (b) 247 (2010), p. 269-272
ISSN: 0370-1972
DOI: 10.1002/pssb.200945513
2009
- , :
Lattice Boltzmann method for dynamic wetting problems
In: Journal of Colloid and Interface Science 335 (2009), p. 84-93
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2009.02.055 - , :
Numerical Simulation of Foam Solidification Phenomena
MetFoam 2009 (Bratislava)
In: MetFoam 2009 - Proceedings of the 6th Interational Conference on Porous Matals and Metallic Foams 2009 - , , :
Auxetic Cellular Metals
MetFoam 2009 - 6th International Conference on Porous Metals and Metallic foams (Bratislava, 2. September 2009 - 4. September 2009)
In: MetFoam 2009 - Proceedings of the 6th International Conference on Porous Metals and Metallic Foams 2009 - , , :
Die castings with integrated PZT-modules - fabrication and functionalities
Tagungsband IV ECCOMAS Thematic Conference on Smart Structures and Materials (Porto, 13. July 2009 - 15. July 2009) - , , :
Integration piezokeramischer Module in dünnwandige Aluminiumbauteile mittels Druckguss
2. Wissenschaftliches Symposium Transregio-PT-PIESA (Dresden)
In: R. Neugebauer (ed.): Großserienfähige Produktionstechnologien fuer leichtmetall- und faserverbundbasierte Komponenten mit integrierten Piezosensoren und -aktoren 2009 - , , , :
Selective Electron Beam Melting: A new way to auxetic cellular structures
20th Annual International Solid Freeform Fabrication Symposium, SFF 2009 (Austin, TX)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84892631091&origin=inward
2008
- , , :
Mechanically Adapted Cellular Titanium for Bone Substitution
International Symposium on Cellular Metals for Structural and Functional Applications 2008 (Dresden) - , , :
Selective electron beam melting - A novel generative manufacturing technique for cellular titanium
5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549129261&origin=inward - , , :
Selective electron beam melting of cellular titanium: Mechanical properties
In: Advanced Engineering Materials 10 (2008), p. 882-888
ISSN: 1438-1656
DOI: 10.1002/adem.200800137 - , , , , :
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
In: Acta Biomaterialia 4 (2008), p. 1536-1544
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2008.03.013 - , , :
The effect of TiH2 particle size on the morphology of Al-foam produced by PM process
In: Advanced Engineering Materials 10 (2008), p. 845-848
ISSN: 1438-1656
DOI: 10.1002/adem.200800139 - :
Foam formation mechanisms in particle suspensions applied to metal foams
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 495 (2008), p. 227-235
ISSN: 0921-5093
DOI: 10.1016/j.msea.2007.09.089 - :
Integral Foam Molding of Light Metals
Springer, 2008
ISBN: 978-3-540-68838-9 - , , , , , , , , , , :
Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts
In: Journal of Biomedical Materials Research Part A 84 (2008), p. 1111-1119
ISSN: 1549-3296
DOI: 10.1002/jbm.a.31540 - , , :
Integration of piezoceramic modules into die castings - Procedure and functionalities
3rd International Conference on Smart Materials, Structures and Systems - Emboding Intelligence in Structures and Integrated Systems, CIMTEC 2008 (Acireale, Sicily)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=62449124626&origin=inward - , , , , :
Thermal conductivity of AZ91 magnesium integral foams measured by the Transient Plane Source method
In: Materials Letters 62 (2008), p. 3960-3962
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2008.05.020 - , , :
Reduced Structure Borne Sound of Integral Foam Components
11th International Conference on Aluminium Alloys 2008
In: J. Hirsch, B. Skrotzki, G. Gottstein (ed.): Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys 2008, Weinheim: 2008 - , , :
Structural damping of integral foam components
5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549119075&origin=inward - , , , :
High pressure integral foam moulding of aluminium
5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549084215&origin=inward - , , :
High pressure integral foam moulding of aluminium - Process technology
In: Advanced Engineering Materials 10 (2008), p. 171-178
ISSN: 1438-1656
DOI: 10.1002/adem.200700267
2007
- , , , , , :
Smart structural components by integration of sensor/actuator-modules in die castings
Industrial and Commercial Applications of Smart Structures Technologies 2007 (San Diego, CA)
DOI: 10.1117/12.705831 - , , , :
Druckgießtechnische Integration von piezokeramischen Modulen in Aluminiumbauteile
1. Wissenschaftlichen Kolloquium des SFB/Transregio PT-PIESA - , , , :
Cellular titanium by selective electron beam melting
In: Advanced Engineering Materials 9 (2007), p. 360-364
ISSN: 1438-1656
DOI: 10.1002/adem.200700025 - , , :
Integral foam molding - A new process for foamed magnesium castings
5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 (Vancouver)
In: Materials Science Forum 2007
2006
- , , , :
Optimized fixing technique for the integration of piezoceramic moduls in die castings
In: Gießereiforschung 58 (2006), p. 1-6
ISSN: 0046-5933 - , , , :
Integration of piezoceramic modules in die castings - a new production technology
10th Adaptronic Congress (Göttingen, 3. May 2006 - 4. May 2006) - , , :
Integral foam moulding of light metals
In: Materials Transactions 47 (2006), p. 2188-2194
ISSN: 1345-9678
DOI: 10.2320/matertrans.47.2188 - , , , , :
Integralschaumgießen von Leichtmetallen
Industriekolloquium 2006 des SFB 396 - , , , , :
Optimization and Stabilization of LBM Free Surface FlowSimulations using Adaptive Parameterization
In: Computers & Fluids 35 (2006), p. 934-939
ISSN: 0045-7930
URL: http://www.sciencedirect.com/science/article/pii/S004579300500157X/pdfft?md5=59701b54104d0daae6791fd1b2140ffa&pid=1-s2.0-S004579300500157X-main.pdf
2005
- , , :
Herstellungsverfahren für druckgegossene multifunktionale Verbundbauteile
In: Giesserei 92 (2005), p. 46-49
ISSN: 0016-9765 - , , :
Magnesium-Keramik-Durchdringungswerkstoffe: Einfluss der Morphologie der keramischen Verstärkungsphase
15. Symposiums Verbundwerkstoffe und Werkstoffverbunde (Kassel)
In: M. Schlimmer (ed.): Verbundwerkstoffe und Werkstoffverbunde 2005: Vortragstexte des 15. Symposiums Verbundwerkstoffe und Werkstoffverbunde 2005 - , , :
Injection Moulding of Magnesium Integral Foams
International Symposium on Cellular Metals and Polymers (Fürth)
In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers, Zürich: 2005 - , , :
Integralschäume aus Magnesiumlegierungen
In: Gießereiforschung 57 (2005), p. 8-14
ISSN: 0046-5933 - , , , :
Light metal integral foam - a promising material for structural applications
CELLMET 2005 (Dresden)
In: G. Stephani, B. Kieback (ed.): Proceedings of the International Symposium on Cellular metals for Structural and Functional Applications 2005 2005 - , , :
Investigation of Micropore Creation on the PM-foam Mophology
International Symposium on Cellular Metals and Polymers (Fürth)
In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers, Zürich: 2005 - , , :
Metal foam stabilization by oxide network particles
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 396 (2005), p. 28-40
ISSN: 0921-5093
DOI: 10.1016/j.msea.2005.01.001 - , , , , :
FreeWIHR: Lattice Boltzmann Methods with Free Surfaces and their Application in Material Technology
KONWIHR Results Workshop (Garching)
In: High Performance Computing in Science and Engineering, Garching 2004, Berlin/Heidelberg: 2005 - , , , , :
Parallel Lattice Boltzmann Methods for CFD Applications
In: Numerical Solution of Partial Differential Equations on Parallel Computers, New York: Springer, 2005, p. 439-465 (Lecture Notes in Computational Science and Engineering, Vol.51)
ISBN: 3-540-29076-1
URL: https://www10.informatik.uni-erlangen.de/Publications/Papers/2005/LBMCFD_LNCSE51.pdf - , , , , :
Lattice Boltzmann Model for Free Surface Flow for Modeling Foaming
In: Journal of Statistical Physics 121 (2005), p. 179-196
ISSN: 0022-4715
DOI: 10.1007/s10955-005-8879-8
URL: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.321.499&rep=rep1&type=pdf - , , , , :
Simulation of Metal Foam Formation with the Lattice Boltzmann Method
International Symposium on Cellular Metals and Polymers (Fürth)
In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers, Zürich: 2005 - , , , :
Cellular Metals and Polymers
Zürich: Trans Tech Publications LTD, 2005
ISBN: 0-87849-941-x - , , :
Interactive Free Surface Fluids with the Lattice Boltzmann Method
(2005), p. 10
URL: https://www10.cs.fau.de/publications/reports/TechRep_2005-04.pdf
(Techreport)
2004
- , , , :
Magnesium Integral Foams: Production and Properties
6th International Conference Magnesium Alloys and Their Applications (Wolfsburg)
In: K. U. Kainer (ed.): Proceedings of the 6th International Conference Magnesium Alloys and Their Applications, Weinheim: 2004 - , , , :
Endogenous particle stabilization during magnesium integral foam production
In: Advanced Engineering Materials 6 (2004), p. 385-390
ISSN: 1438-1656
DOI: 10.1002/adem.200405147 - , , , , :
FreeWiHR --- LBM with Free Surfaces
(2004), p. 15
URL: https://www10.cs.fau.de/publications/reports/TechRep_2004-06.pdf
(Techreport) - , :
Foaming of Light Metals: Mechanisms and Numerical Modelling
3rd International Conference "Computational Modeling and Simulation of Materials" (Acireale)
In: P. Vincenzini (ed.): Advances in Science and Technology Vol. 43, Proceeding of the 3rd Conference "Computational Modeling and Simulation of Materials, Part B" 2004
2003
- , , :
PM aluminium foams: Stabilizing mechanisms and optimization
MetFoam 2003 (Berlin, 23. June 2003 - 25. June 2003)
In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Foaming Technology, Berlin: 2003 - , , , :
Gießtechnische Herstellung von Leichtmetallbauteilen mit zellularem Kern
In: M. Geiger, G. W. Ehrenstein (ed.): Robuste, verkürzte Prozessketten für flächige Leichtbauteile, Bamberg: Meisenbach-Verlag, 2003, p. 57-69 - , , :
Encasing of aluminium foam with magnesium by die casting
MetFoam 2003 (Berlin, 23. June 2003 - 25. June 2003)
In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Metal Foaming Technology, Berlin: 2003 - , , , :
Magnesium integral foams
MetFoam 2003 (Berlin, 23. June 2003 - 25. June 2003)
In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Metal Foaming Technology, Berlin: 2003 - , , , :
Simulation von Metallschaum mittels der Lattice-Boltzmann Methode
35 (2003), p. 4-8
(Techreport) - , , :
From New Materials to Finished Components - Metals Research at the WTM institute of the University of Erlangen-Nuernberg
In: Maschinenbau in Bayern 2003, 2003, p. 46-49
(anderer) - , , , , , , , , :
Metallschaumverbundstrukturen - Prozesstechnologie und werkstoffmechanische Analyse
Robuste verkürzte Prozessketten für flächige Leichtbauteile (Erlangen)
In: Robuste verkürzte Prozessketten für flächige Leichtbauteile, Industriekolloquium 2003 des SFB 396, Bamberg: 2003
2002
- , , :
Encasing by Casting
In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, p. 103-113
ISBN: 3-527-30339-1 - , , , , , :
Optimierung von Kohlenstofflangfaser/AZ91 Verbunden durch eine pyroC/TiN-Doppelbeschichtung
Verbundwerkstoffe und Werkstoffverbunde (Chemnitz, 5. September 2001 - 7. September 2001)
In: B. Wielage, G. Leonhardt (ed.): Verbundwerkstoffe und Werkstoffverbunde, Chemnitz: 2002
URL: http://www.wileyeurope.com/cda/product/0,,3527303197,00.html - , :
Foaming Processes for Aluminum
In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, p. 8-14
ISBN: 3-527-30339-1 - , :
The Physics of Foaming: Structure Formation and Stability
In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, p. 33-43
ISBN: 3-527-30339-1 - , , :
Modeling of metal foaming with lattice Boltzmann automata
In: Advanced Engineering Materials 4 (2002), p. 765-769
ISSN: 1438-1656
DOI: 10.1002/1527-2648(20021014)4:103.0.CO;2-M - , , , :
The investigation of morphometric parameters of aluminium foams using micro-computed tomography
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 328 (2002), p. 334-343
ISSN: 0921-5093
DOI: 10.1016/S0921-5093(01)01809-3
2001
- , , :
Schleudergießen von Metall-Keramik-Verbundwerkstoffen bei hohen Drehzahlen und Temperaturen
Verbundwerkstoffe und Werkstoffverbunde (Chemnitz, 5. September 2001 - 7. September 2001)
In: B. Wielage, G. Leonhardt (ed.): Verbundwerkstoffe und Werkstoffverbunde, Weinheim: 2001 - , , :
Encasing of aluminium foams by die casting: foam core properties and core fixing
Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001) (Bremen)
In: Metal Foams and Porous Metal Structures, Bremen: 2001
URL: http://www.mit-verlag.de/b111.html - , , , :
Modelling of metal foaming by in-situ gas formation.
MetFoam 2001 (Bremen, 18. June 2001 - 20. June 2001)
In: J. Banhart, M. F. Ashby, N. A. Fleck (ed.): Cellular Metals and Foaming Technology, Bremen: 2001
2000
- , , , :
Experimental and Numerical Investigation of the Formation of Metal Foam
Materials Week 2000 (München, 25. September 2000 - 28. September 2000) - , , :
Encasing of Al-foams by Die Casting as Manufacturing Process for Light Weight Components
Materials Week 2000 (München, 25. September 2000 - 28. September 2000) - , , :
Herstellung flächiger Leichtbauteile durch Umgießen von Aluminium-Schäumen im Druckgießverfahren
In: Materialwissenschaft und Werkstofftechnik 32 (2000), p. 428-431
ISSN: 0933-5137 - , , :
Production of flat light-weight structural components by recasting of aluminum foams - , , , , :
Influence of processing conditions on morphology of metal foams produced from metal powder
In: Materials Science and Technology 16 (2000), p. 781-784
ISSN: 0267-0836 - , , , , , :
Herstellung flächiger Verbundbauteile mit Metallschaumkernen
Sonderforschungsbereich 396 - robuste verkürzte Prozessketten für flächige Leichtbauteile - 1. Berichtskolloquium (Bamberg, 24. May 2000 - 25. May 2000)
In: Geiger, M.; Ehrenstein, G.W. (ed.): Sonderforschungsbereich 396 - robuste verkürzte Prozessketten für flächige Leichtbauteile - 1. Berichtskolloquium 24./25.Mai 2000 - , , , :
Carbon Long Fiber Reinforced Magnesium Alloys
In: Advanced Engineering Materials 2 (2000), p. 327-337
ISSN: 1438-1656 - , :
Processing of Metal Foams - Challenges and Opportunities
In: Advanced Engineering Materials 2 (2000), p. 159-165
ISSN: 1438-1656
1999
- , :
Numerical Simulation of Foam Formation and Evolution with Modified Cellular Automata
MetFoam '99 (Bremen)
In: J. Banhart, M. F. Ashby, N. A. Fleck (ed.): Metal Foams and Porous Metal Structures, Bremen: 1999 - , , :
Influence of the Fiber-Matrix Interface on the Strength of Unidirectional Carbon Fiber Reinforced Magnesium Composites
Euromat 99 (München)
In: Metal Matrix Composites and Foam 1999 - , , , :
Fabrication process for continuous magnesium/carbon-fibre composites with graded fibre content
Proceedings of the 1998 5th International Symposium on Functionally Graded Materials, FGM '98 (Dresden)
In: Proceedings of the 1998 5th International Symposium on Functionally Graded Materials, FGM '98, Uetikon-Zuerich, Switzerland: 1999
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032676217&origin=inward - , , , :
Thermal Fatigue of Locally Fiber Reinforced Magnesium with Graded Structure
12th International Conference on Composite Materials (Paris) - , , , :
Thermische Ermüdung von lokal verstärkten Magnesium-Kohlenstoff-Verbundwerkstoffen mit gradierter Struktur
Verbundwerkstoffe und Werkstoffverbunde (Hamburg, 3. October 1999 - 7. October 1999)
In: K. Schulte, K. U. Kainer (ed.): Verbundwerkstoffe und Werkstoffverbunde 1999
1998
- , :
The physical defects of the hyperbolic heat conduction equation
In: Applied Physics A-Materials Science & Processing 67 (1998), p. 397-401
ISSN: 0947-8396
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032181110&origin=inward
1997
- :
Theoretische Untersuchungen zur Wechselwirkung von ultrakurzen Laserpulsen mit Metallen (Dissertation, 1997)
1996
- , , , :
Precision machining with copper vapour lasers
NATO Proc. Advanced Workshop, Pulsed Metal Vapor Lasers - , :
Theoretical description of laser ablation - , :
Thermal and Mechanical Aspects in Short Pulse Laser Interaction with Metals
European Conference on Laser Treatment of Materials 1996 (Stuttgart) - , , , :
Physical and material aspects in using visible laser pulses of nanosecond duration for ablation
In: Applied Physics A-Materials Science & Processing 63 (1996), p. 123-131
ISSN: 0947-8396
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0030214563&origin=inward - , , :
Numerische Simulation der Eigenspannungen und Deformationen beim Laserstrahlrandschichthärten
In: Härterei-Technische Mitteilungen 51 (1996), p. 19-28
ISSN: 0017-6583
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=4243138582∨igin=inward
1995
- , , , :
Kupferdampflaser für die Mikromaterialbearbeitung
In: Laser '95, 1995, p. 231-237 - , , , :
Eigenspannungen beim Laserstrahlschweißen verschiedender Baustähle
In: Härterei-Technische Mitteilungen 50 (1995), p. 380-386
ISSN: 0017-6583 - , :
Theoretical Descreption of Laser Ablation and its Application on Precision Machining
Laser Processing: Surface Treatment and Film Deposition (Sesimbra)
In: Proceedings of the NATO ASI 1995
1994
- , , :
Residual stresses in laser hardened steels and their numerical simulation
European Conference on Laser Treatment of Materials 1994 - , , , , :
Experimental and numerical determination of distortion of laser hardened steels
International Symposium on Metals Science: Numerical Predictions of Deformation Processes and the Behaviour of Real Materials (Roskilde) - , , , , :
Surface remelting of ductile iron with a high power pulsed Nd:YAG laser
High Power Lasers and Laser Applications V (Wien)
Books
Integral Foam Molding of Light Metals
Technology, Foam Physics and Foam Simulation
2008, XII, 224 p. 143 illus., Hardcover
ISBN: 978-3-540-68838-9
Springer Verlag
Cellular Metals and Polymers
2005, III, 286 p., Hardcover
ISBN: 0-87849-491-x
Trans Tech Publications
Lectures
Course
Internship
Lecture
- Lecture Coating Technology
- Lecture Materials in Automobil Engineering
- Lecture Metallic Materials: Principles
Lecture with exercise
- Lecture Experimental Methods
- Lecture High Pressure Die Casting
- Lecture Metallic Materials: Technology 1
Seminar