2024

• Chen Y., Fu Z., Ye J., Wahlmann B., Körner C.:
  Additive Manufacturing of TiC/Steel Composites Using Electron Beam Melting and In Situ Infiltration
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202301313
• Ye J., Chen T., Körner C.:
  Correlating outgassing and smoke phenomenon in electron beam powder bed fusion of Ti6Al4V using a residual gas analyzer
  In: Progress in Additive Manufacturing (2024)
  ISSN: 2363-9512
  DOI: 10.1007/s40964-024-00745-3
• Ye J., Semjatov N., Bidola P., Lindwall G., Körner C.:
  Revealing the Mechanisms of Smoke during Electron Beam–Powder Bed Fusion by High-Speed Synchrotron Radiography
  In: Journal of Manufacturing and Materials Processing 8 (2024), Article No.: 103
  ISSN: 2504-4494
  DOI: 10.3390/jmmp8030103

2023

• König HH., Semjatov N., Spartacus G., Bidola P., Ioannidou C., Ye J., Renner J., Lienert U., Abreu-Faria G., Wahlmann B., Wildheim M., Ackelid U., Beckmann F., Staron P., Hedström P., Körner C., Lindwall G.:
  MiniMelt: An instrument for real-time tracking of electron beam additive manufacturing using synchrotron x-ray techniques
  In: Review of Scientific Instruments 94 (2023)
  ISSN: 0034-6748
  DOI: 10.1063/5.0177255
• Ye J., Renner J., Körner C., Fu Z.:
  Electron-optical observation of smoke evolution during electron beam powder bed fusion
  In: Additive Manufacturing 70 (2023), Article No.: 103578
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2023.103578

2022

• Bäreis J., Semjatov N., Renner J., Ye J., Fu Z., Körner C.:
  Electron-optical in-situ crack monitoring during electron beam powder bed fusion of the Ni-Base superalloy CMSX-4
  In: Progress in Additive Manufacturing (2022)
  ISSN: 2363-9512
  DOI: 10.1007/s40964-022-00357-9
• Fu Z., Ye J., Franke M., Körner C.:
  A novel approach for powder bed-based additive manufacturing of compositionally graded composites
  In: Additive Manufacturing 56 (2022), Article No.: 102916
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2022.102916
• Yang J., Fu Z., Ye J., Kübrich D., Körner C.:
  Electron beam-based additive manufacturing of Fe93.5Si6.5 (wt.%) soft magnetic material with controllable magnetic performance
  In: Scripta Materialia 210 (2022), Article No.: 114460
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2021.114460

2020

• Wolf T., Fu Z., Ye J., Heßelmann C., Pistor J., Albert J., Wasserscheid P., Körner C.:
  Periodic open cellular Raney-Copper-Catalysts fabricated via selective electron beam melting
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201901524